Construction of Transfer Station at Thataneri Location with a Capacity of 200TPD for the Madurai Corporation

Amount

Mobilization : Clearing the site for starting the construction work with store yard, shelter, bar bending work site, arranging machinaries and all other safety measuers for the construction.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wetsand, or silt not underwater, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete 10cum

BACKFILLING Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

ANTI-TERMITE TREATMENT: (b) Anti-termite treatment to the outside of foundation with chemical emulsion by admixing Imidaclaprid emulsifiable concentrate (62 ml in 28.5 litres ) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.

CONCRETE PCC Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Reinfoced Concrete Works Reinforced Cement concrete 1:1.5:3 ( one cement, one and half sand & three course aggregate ) using 20mm gauge hand broken / and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc., complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.at ground floor

Providing and laying in position Standardized Concrete Mix M-30 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC of works with minimum cement concrete of 400kg/m3 and maximum water cement ratio of 0.55 including admixture ( Plaster / superplasticizer ) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete improve work ability with out imagining strength and durability with about (5.0cu.m) 7730kg of 20mm machine crushed stone jelly and with about (3.3cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying vibrating with mechanical vibrators finishing curing etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary with out claiming extra,etc,. Complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requirements of IS Standards. ( No separate payment will be made by the Department for the excess usage of materials).

Pavement (Sub base)(outside building) : Construction of granular sub base providing Grade I materials spreading in unifrom layers on prepared surface, mixing by mix in place method a OMC and compacting with vibratory roller to achieve the desired densit Providing and laying, spreading and compacting 0.396m3 of 4522. 40mm & 0.528m3 of 22.402. 36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wetmix macadam(WMM) specification including pre mixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Reinforced Cement concrete 1:1.5:3 ( one cement, one and half sand & three course aggregate ) using 20mm gauge hand broken / and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc., complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.at ground floor

Providing and laying in position Standardized Concrete Mix M-25 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken granite stone jelly for all RCC of works with minimum cement concrete 0f 440 kg/m3 and maximum water cement ratio of 0.55 including admixture ( Plaster / super plasticizer ) in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without imagining strength and durability with about (5.0cu.m) 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying vibrating with mechanical vibrators finishing curing etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc,. Complete complying with standard specification and as directed by the departmental officers the coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS I sections, channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification

Supplying and fixing Roof and wall cladding Sheet of Bare Galvalume of 0.47mm TCT AZ 150 550MPA (Non colour) including Over lapping and connection portion of bolts etc., complete complying with standard specification and as directed.

FORM WORK: Providing making, erecting and fixing in position the formwork in true line and level either in plywood or steel plates including strutting , staging, proping, bracing and making the joints leak proof , providing chamfers an edges of columns,

Expansion Joint filling Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

ROOF SKY LIGHT AND VENTILATOR Supply and instalization of Sky light of 5mm thick polycarbonate with standard specifications

Supplying fabricating and fixing in position Anodised aluminium natural colur matt finish Ventilators

FLASHING/ GUTTER AND DOWNSPOT : Supply fabricating and fixing in position aluminium 30 x 30 x30 cm rain water channel arrangements with drain pipe with slope as per specificaion

Providing fabricating and erecting Steel Gates for Main Entrance gate with wicket gate and parking Gate of Mild Steel members like channels, angles, rods, flats, rectangular and square pipes, plates, etc., as per detailed drawings and specifications including cutting welding drilling holes, bolting, jointing etc. hauling to the site, hoisting, erecting in position, aligning levelling grouiting with (1:1.5:3) CC applying one coat of red oxide Zinc chromate primer after surface preparation as approved. Providing heavy type rollers at bottom of gates, guide rails, locing arrangements, pivoted hinges etc,, complete with all tools, labour and materials.

Brick work in following Cement Mortar 1:5 (1 cement and 5 corse aggregates) using best quality Country bricks of size 8"3/4 x 41/4" X2 3/4"for above basement including curing, etc.,complete complying with standard specifiction.

Brick partition walls of 11.50cm thickness using best quality Country bricks of size 8"3/4 x 41/4" X2 3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately).

Random rubble masonry in cement motor 1:5 (one Part of cement, Three part of Sand) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification

Plastering with cement mortar 1:3, 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc, complete as per standard specifications (S.I.306)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality VStain Free Nano polished Vertified Tiles- 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mi

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed ) of size 305 mm x 305 mm x 6 mm in all floor sovera base layer of cement mortar1:3 (one cement and three sand ) 20mm thick laid in- site and pointed with same coloured cement Colour

Dadooing the Wall with Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar1:2 -20mm thick & pointed with same colour of cement etc., complete as per standard specification

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing the Wall with Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar1:2 -20mm thick & pointed with same colour of cement etc., complete as per standard specification

Construction of drain in position 30 x 30 x30 cm rain water channel arrangements with drain pipe with slope as per specificaion

Painting two coats of synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primer over new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including

Painting two coats of Emulsion paint of approved colour including cost of all materilas and labour charges primer, paint all complete as per drawings and specifications. inside and outside

Construction of drain for Lechate Sump both sides as per specifiacation 30 x 30 x30 cm drainage size with required slop including all materials plastering with smooth finish etc., complete

Supplying and fixing in position First Quality and approved varity with ISI mark CI manhole cover of size 450 x 450 mm of completed specification

Supply and erecting 1 HP monoblock with ISI mark with necessary accessories complete complying with standard specification

Supply and fixing of Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames. 15mm MS square tubesfor top, lock and bottom rails. The steel tubes shall becovered with 5mm thick solid PVC Sheets. Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. Theover all size of styles shall be 50mm x 30mm. The over allsize of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter -Solid panel PVC door with frame

Supply and fixing Door Frame in position to line and level in Malaysian/Ghana Teakwood frame out of specified sections finished size135mmx65mm asper drawing details including cuttingrebate,finished in 3 coats of natural polish matt finish (TUFFWOOD OR EQUIVALANT) matching the shutter laminate finish of approved colour & shade as per Architects instructions.

Pre-Painted Galvanized Iron Two Track Sliding Window: Supply and fixing pre-painted two track, two panel sliding system fabricated from roll formed sections made of galvanized steel powder coated (Base steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: Section for frame two track should be of 59mm x 44mm, section for shutter should be of 35mm x 49mm for window, section for euro groove should be of 25mm x 24mm and for lap strip should be 30mm x 41mm. Fixing details: The frame and shutter sections should be cut to length, joined with corner brackets made of glass filled nylon. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass. Accessories: Corner brackets made of glass filled nylon gasket made of Ethyl Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single wheel rollers for windows should be provided. Glass: Glass shutter and fixed glass portion should be provided with a glass of 4mm pinhead glass. Window frame should be fixed to brick / concrete masonry by using nylon self-expanding caps and driving MS electro plated 80mm long screws into the caps through frames.

Plumbing, Electrical and Sanitary Fittings,CCTV including Borewell etc. Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32MM

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 25MM

Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32MM

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 25MM

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying and fixing in position first quality and approved of 32mm Dia Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 160MM DIA

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 90MM DIA

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110MM DIA

Supply and delivery and fixing of 2000 Litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Providing 6" dia borewell and Submersible Motor with PVC Tank Arrangements Annexure enclosed Providing Geological survey to fix the borewell point

Drilling 150mm dia borewell in all kinds of soils expect hard rock by first taking pilot bore and than enlarged to the required dia to enable to inserting the P.V.C. casing pipe by directed rotary mud and circulation method including all labour and hire Charges etc. complete

Supply of 160mm dia P.V.C. Casing pipe

Labour charges for inserting 160mm O.D. PVC casing pipes assembly (with slot or without slots) in the drilled bore including jointing the pipe etc. complete

Drilling of borewell anywhere in-Tamilnadu including transportation from one place toanothar place within Tamilnadu in alluvaial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140/150mm dia and then enlarging to requierd dia by direct or reverse rotatry mud and circulation methd using contractor's rig, fuel, labour, drilling, at the site shown by the Deparment Officers including construction of mud pit.

Developing the borewell with air compressor of 300 cfm capacity (min 8 hours) including transportation labour and fuel charges for compressor as directed by corporation yield test by "V" notch method.

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Complete

Supplying and filling in foundation and basement with filling quarry dust in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc.

Plain Cement Concrete 1:4:8 (one cement five fine aggregates and ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in cm 1:5 (one cement five sand ) using 2nd class bricks in cluding cost of also materials labour charges. Curing etc complete and director by corporation officers

Flooring Cement concrete 1:5:10 (One cement five sand and ten aggregates) using 40mm gauge hard broken.granite jelly for flooring 10cm thick and top left rough to receive a floor finish etc.complete

Plastering with cm 1:3 (one cement three sand) 20mm thick

Plastering with cm 1:5 (one cement five sand) 12mm thick

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA - BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes, The pump shall be with stainless steel shaft and dynamically balancex bronze or Cast SS impeller, brass screws and CI FG200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS 9283 / 1985 as amended there after, suitable for operation in AC three pohase 415 V +/-10%, 50HZ +/-5%, 50lpm x 125m

THREE PHASE PANEL BOARD - D.O.L.WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(+5% and ) 415 V(+10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitr, running capacitor and On/Off Push button switches, 5way connector,wiring with 1sq.mm/1.5 sq.mm copper PVC insulateed cable. powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately)-50lpm X 125m head

Supply and delivery of PVC insulated and sheathed 4.0 sq.m copper cable conforming to IS 694/1990 suitable for submersible pump set..

Supply and delivery of MS Kisok of size 0.75mx0.45mx0.75m made up of MS angles of size 50mmx50mmx4mm alround covered with 16 gauge MS Sheet and Kiosk door made up of MS Plates of size 15mmx3mm including cutting.welding grinding locking arrangements,labour charges etc.,complete.

Supply of PVC pipe and G.I pipes and PVC pipe & Specials. 40mm UPVC Pipe

Nylon Rope

32mm Gi bend

32mm GM gate Valve

32mm GM non return Valve

32mm Gi elbow

32mm Gi Pipe

20mm Gi pipe

20mm Gi Coupling

20mm hex nipple

PVC screw down tap Heavy type 20mm dia

40mm Clamp set

150mm borewell cover

Supply, delivery & fixing of HDPE tank of 2000 lit Capacity as per ISI 2701/1996.

Labour charges for erection of submersible pump set bore well including fixing and jointing submersible cable with proper clamps pressure gauge up to the exterior wall of pupm room kisok and erection of panel board consisting of TPCIN switches starter volt meter ammeter three indicator tamp capacitor single phase preventor ater level guard laying and jointing if cables and earthing complete the pumpset on trial for 3 days..

Construction of borewell chamber of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight cover and frame etc.complete.., (Size-0.60mx0.60mx0.60m)

Labour charges for over head wiring from EB pole to pump room by fixing 32mm dia GI pipe to the required height over roof slap of pump room ads directed by EB authorities including fixing copper wire in four layers and inslulated with proper reels wire required MS clampset supp delivery and fixing of all materials such as bore well cover clamp set U kondi 7/20GI wire insulated reels 24 18 TW meter board 10x4 aorial board PVC Tape roll copperd earth plate GI bolt and nut with washer nutral linkPVC insulted copper wire (7/20 wire up to 10 HPm 7/16 wire above 10hp)1”PVC hose pipe 1” PVC clamp 25mm PVC encacing pipe 332AMPS fuse carroar 6no 10HP and 60 amps fuse carrier.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Run of 3 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed position.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion

Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed position.

Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

supply and fixing of 1400mm (56") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of High-Power Plug & Socket 63A 380/415V 3P+N+E Surface Mounting Sockets+32A 200/250V 2P+E Surface Mounting Sockets including cost of all materials , labour, lead lift etc., complete.

Supply and fixing of 100W LED flood light Fitting with Driver including cost of all materials , labour, lead lift etc., complete.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 150W LED flood light Fitting with Driver including cost of all materials , labour, lead lift etc., complete.HIGH BAY LIGHT

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) with PVC unsheathed copper leads from terminals to the fitting.including cost of all materials , labour, lead lift etc., complete.

supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) from ceiling with PVC unsheathed copper leads from terminals to the fitting. including cost of all materials , labour, lead lift etc., complete.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. for METER PANEL TO MAIN PANEL

Supply and fixng of TNEB meterboard suitable for 3phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size1-1/2"x1-2"x1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12 mm thickness with necessary bolts and nuts support sand supply and fixing of 3 Nos. 200A fuse units (500V), 1No. neutral link, copper earth flat of size 1"x1/4" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete

Supply and fixing of copper earth flat of size 1" x 1/4" earth pit main panel board including cost of materials and labour charges

Earthing as per PWD standard with an earth electrode of 2 metre Class'B GI pipe of dia notless than 32mm complete with necessary masonry work

Supply and Fixing 3x 6.0 sqmm flat cable in 37mm dia white PVC 4Kg pipe slive and earth work laying work. (For Security Room 1 to Bore well) for( MainPanel and PEB)

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. for service connection mains

Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification Hikvision PTZ Camera Dahua 2MP DH-SD3A210-GN-A-PY 3- inch 2MP 10X30Mtrs,With Full Color, Network Speed Dome PTZ

Hikvision Bullet Camera Hikvision 4MP POE IP Camera DS- 2CD1043G0E-I HD Bullet H.265+ 2.8mm

Hikvision NVR 32 Channel Metal 4 SATA 4K NVR DS- 7732NI-K4,256 Mbps Incoming Bandwidth,H.265+

Network Switch Secureye 8+2 Full Giga POE S-8GE- 2UG-NW(10/100/1000)

Harddisk 4TB Toshiba Surveillance Harddisk

CAT6 Cable D-Link CAT6

Rack 6U 500D Rack / Tray For Switch / With Spike

Connectors RJ45 Jack

Rack 2U Rack PVC Box With Spike

Network Switch 8 Port Network Data Switch

Weigh Bridge including required hardware for weighment display, software, RFID reader and automatic (human-less) reader 1. 10T - 1 (5.0 x 2.5m) 2. 40T - 1 nos (7.5 x 3m) Boom Barrier - Automatic with Auto Vehicle detection

Static Compactor machine along with complete Electricals and Hydraulic system consist of • Horizontal Compaction Machine SC – 260 with Tip Cart mechanism / Hopper • Hopper • Guillotine system • Hydraulic Clamping Claw • Drainage System for leachate • Hydraulic Power Pack • PLC based Electronic Controls. • Container change over system (Two Containers) The chamber volume of 3m3 - Compress cycle time in 41Sec - Theoretical Volume Capacity of 263 m3/h - Voltage of 415V - Rear tipcart lifting capacity of 2500 to 3000 kg - Rear Tipcart Volume of 5-8m3

Container Change Over unit A two-container change over system is provided to move the filled container from the compactor and replace it with an empty container already placed on the tracks for replacement. This system is driven by hydraulic cylinder.

Hook Loader 20 T Capacity should lift and transport 20m3 container carring MSW. Hook Loaders are fabricated in accordance with CE machine regulations and ensure the safety of its operator and its environment. Hook loader must cinsists of suitable pump, valve, cylinders and rear Stabilizer for smooth operations in the Transfer Station. Material of Construction high grade Steel – S420, E450, S355

Trucks 28 T Capacity {Make: Eicher / Ashok Leyland / Tata}BS-VI ARAI certified having Wheel base minimum 4800mm upto 5200mm.•

Container 20 Cum must be constructed with suitable design with carrying capacity upto 17.50Ton pay load of MSW Round shaped container ensure that the discharge will be smoother at lower tipping angle and no residue will remain in the container, after discharge. Front of the container has a V-shaped structure with a hook eye made of special steel, which bears the forces during on- n - off rolling of the container.At the rear side two heavy duty rollers are attached for easy movement of the container on the ground during on-n-off rolling.

Insurance, Registration, Road Taxes, Transportation, installation and Commissioning of above item 40,41,42,43,44

Add GST 18%

AGRYA INFRATECH (BID ID -1254346)