Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹32.7 L+₹1.1 L (3.33%)Rejected-Finance 12 138 MANAS NAGAR BARA REWA POST OFFICE BANSAGAR COLONY REWA | REWA | REWA | MADHYA PRADESH | 486001 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹34.4 L+₹2.7 L (8.52%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹34.7 L+₹3.1 L (9.72%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹78,000
Closing Date
9 Dec 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
IMPROVEMENT OF SHAFT AREA CI GI PIPELINE AT R 4 AT RS COLABA UNDER GE NW NAVY NAGAR COLABA MUMBAI
2022_MES_561983_1
8290/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar, Colaba
Class D and Category a(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹78,000
Yes
1 Feb 2023
7 Nov 2022
10 Dec 2022
7 Nov 2022
9 Dec 2022
21 Nov 2022
7 Nov 2022 - 2 Dec 2022
Amount
Taking down old existing unserviceable cement plaster loose/unsound weaken cement concrete of any description and in any position from existing external/internal surfaces of wall, roof, etc
M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement and using welded mesh where required all as specified including chicken wire mesh and scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC and welded mesh shall be measured and paid separately) ( Note :Rate of Chicken wire mesh is included in this item )
Supply only integral water proofing compound of approved ISI make.
M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).
S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia (Minimum weight 25 gms)
Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.
S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.
S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.
S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls fitted with oval access door complete all as specified.
S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls fitted with oval access door complete all as specified.
S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed.
S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) all as specified and directed.
Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.
S&F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to wall
S&F PVC (SWR)bends (any radius) for rain water pipes 160 mm bore diminishing pieces or tapers on walls complete all as specified.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall
S&F PVC (SWR)bends (any radius) for rain water pipes 110 mm bore diminishing pieces or tapers on walls complete all as specified.
Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Demolition of lime concrete of any description and in any position not otherwise specifically provided for.
M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 10 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of liquid membrane over a coat of primer of STP make as per manufacturers instruction over vertical sides of sunken floors.
M&L cement concrete 1:7:12 F2 type with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.
M & L non skid ceramic tiles coloured of size 300x300x6 to 7mm thick laid in floors over cement mortar, screeding, set and jointed in white cement mixed with pigment including bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes all as specified.
M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over backing layer of 10mm thick in CM 1:4 all as specified and as directed.
S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.
S&F in repair 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs
M & L for preparation of newly plastered surfaces of walls & applying two coats of chemical waterproofing treatment(601 raincoat of Pidilite or Dr.fixit or equivalent) of approved colour on wall such as Flexcoat, Beckcoat Exshield etc or equivalent over a coat of primeseal/primers complete as per manufactures Instructions, all as directed.
M & L for preparation of old decorated surfaces of walls & applying two coats of chemical waterproofing treatment(601 raincoat of Pidilite or Dr.fixit or equivalent) of approved colour on wall such as Flexcoat, Beckcoat Exshield etc or equivalent complete as per manufactures Instructions, all as directed.
Removing demolished materials outside MD land to a distance exc 5Km but n exc 10Km.
Chipping ,removing carefully concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.
M & L for clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete, Applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem of Roff rust cleaner of Piddilite or Dr Fixit Rust removal or sholirust of STP Ltd. on the rebars,including cleaning the reinforcement ,wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry and applying two coats of anticorrossive treatment. Note :- Measurement on the basis of area of concrete exposed.
M/L for providing and fixing additional steel bar or stirrups of diameter in various structural elements like columns beams and foundation including drilling bending and fixing the bars with epoxy putty etc complete as directed by Engr-in-Charge
M & L for applying two coats of anticorrosive Treatment to Reinforcement by application of two coats of anti-rust protective coating in the form of Acrylic Polymer with a minium splid content to 40% solid mixed with cement in 1:1.5 proportion ( 1 part polymer and 1.5 part cement) on rebars after cleaning of rust scales with time interval of minimum 4 hours between each coat by brush as per manufacturers instruction.Anti-rust protective shall be procured from one of manufacturer given below complete all as specified and directed by Engineer-in-Charge. (Make :- Fosroc/Sika/STP Ltd/ Krishna Conchem)
M & L for building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1Cement-3 part graded cleaned pre-packed river sand 10% latex mortar by weight of cement-0.5 w/c ratio) upto 20 mm to 40 mm thickness including leveling profiling and removing and cleaning existing vegetation growth in structural and Non structural items all complete etc. all complete as directed by Engr-in-Charge. (Make :- Fosroc/Sika/STP Ltd/Krishna Conchem)
M & L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete all complete as directed by Engr-in-Charge.
M&L for casting and repairing of excessively damaged members with micro concrete at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing complete. Grade of Micro-concrete to be M-40 at 28 days and same shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/STP Ltd/Krisha conchem).(Rates includes jacketing,formwork and micro concrete)
M&L for repairing of shrinkage of structure by drilling hole in structures using up to a depth of 15 mm and 18 mm dia, removing dust,etc by vacuum cleaner and blowers,providing and fixing of heavy grade GI pipe nipple 15 mm dia,100 mm long @ 1 mtr c/c in both direction and injection of High strength polymer based injection grout with flexural strength of minimum 45 MPa,Tensile strength of 26 MPa in 7 days and compressive strength of minimum 50 MPa in 1 day up tp 80 MPa in 7 days giving minimum pot life of 1hr@20°C and closing ends nipple epoxy putty/silica jelly after injecting the chemicals mixed with cement slurry. Make :M/s Sika india Pvt ltd/Thermax Ltd/ M/s Bostik india Pvt Ltd/ M/s Fosroc chemicals/M/s STP Pvt. Ltd.
Rama Construction Co
SHREE JAGDISH FURNITURE CO.
Anil Industrial Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .