Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹51.6 L+₹9.4 L (22.3%)Rejected-Finance 403 GH MANSADEVI COMPLEX PANCHKULA 134109 HARYANA | PANCHKULA | HARYANA | 134109 | L2 | Rejected-Finance Other than L1 Bidder | |
| 3 | Rejected-Technical BUDOOBAGH NOWPORA 0 KHANYAR SRINAGAR JAMMU KASHMIR 190003 | SRINAGAR | JAMMU AND KASHMIR | 190003 | - | Rejected-Technical Due to banned for issue of tender for not deposit of FDR by GE (AF) Leh |
Tender Value
₹99.5 L
EMD Value
₹1.7 L
Closing Date
22 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
REPAIR/ MAINT AND SERVICING OF CHS PLANT INSTALLED AT 14 CESR ALFA ENGR REGT GH 41 OFFRS ACCN CORPS PRO UNIT AND GEOTHERMAL HEATING SYSTEM WITH CONNECTED WORKS AT SECTOR A UNDER AGE E/M-II OF GE 865 EWS AT LEH
2023_MES_589843_1
138WE/L-20/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 865 EWS
₹1.7 L
Yes
9 Oct 2023
17 Apr 2023
29 May 2023
17 Apr 2023
22 May 2023
8 May 2023
Amount
Taking out the unservicable insulation from MS ERW pipe of size 150mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe, complete all as specified and directed by Engr-in-Charge.
All as per item No.1 above but of size 125mm
All as per item No.1 above but of size 100mm
All as per item No.1 above but of size 80mm
All as per item No.1 above but of size 50mm
All as per item No.1 above but of size 40mm
All as per item No.1 above but of size 32mm
All as per item No.1 above but of size 25mm
All as per item No.1 above but of size 20mm
M&L for 150mm dia MS ERW pipe heavy grade 'C' Class complete heavy grade class, 'C' with welded ends laid in ducts over the angle iron supports/ fixed on the walls including fittings, complete all as specified and directed by Engr-in-Charge. (Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)
All as per item No.10 above but of size 100mm
All as per item No.10 above but of size 80mm
All as per item No.10 above but of size 50mm
All as per item No.10 above but of size 40mm
All as per item No.10 above but of size 32mm
All as per item No.10 above but of size 25mm
M&L for replacement of Cast iron Butterfly valve of size 150mm dia Class PN 1.6 with SG Iron Dice flanged ends (integrally cast) horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etc including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
All as per item No.17 above but size 100mm dia
All as per item No.17 above but size 80mm dia
S&F in replacement of inlet/outlet forged brass ball valve 20 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F and replacement of Inlet/outlet forged brass ball valve 25 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F and replacement of Forged steel globe valve, bolted bonnet outside screw & yoke type rising stem for 25mm dia complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
All as per item No.22 above but of size 40 mm
All as per item No.22 above but of size 50 mm
M&L Brass flare nuts of size 20/15 mm bore and fix the brass valves/FCUs including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of FCU connection flexible pipe 20/16 mm as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of fan coil unit duel shaft electric motor 1/12 HP, 30 watt 930 RPM, 3 speed as per existing, complete all as specified and directed by Engr-in-Charge.
M&L for Welding the leakage portion of MS pipe line including earhwork complete and materials as required for welding the pipe line of size 25 mm to 200 mm including testing on full pressure, complete all as specified and directed by Engr-in-Charge.
M&L for cleaning of MS overhead POL storage tank of capacity 2000 Ltr including all type of T&P and chemical required for the same, including welding work to leakage surface including opening and refixing the existing insulating materials to the external surface of storage tank, complete all as specified and directed by Engr-in-Charge.
M&L for Pressure gauge 100mm dia, rating 0 to 80 Kg/Sqcm including taking out existing unserviceable gauge, complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal monoblock pump KDI-515+ 3 phase 415 volts of capacity 5 HP with Mechanical seal complete fittings with accessories, complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal monoblock pump 3 phase 415 volts of capacity 3 HP with Mechanical seal complete fittings with accessories, complete all as specified and directed by Engr-in-Charge.
T&P alongwith Labour only for attending of complaint for day to day / daily complaints by employed skilled staff, checking the serviceability of fan coil unit of any capacity for having continuous sreviceability of FCU and CHS for any number of time as desired by Engr-in-Charge including replacement of minor spare part like Gasket, Teflon tape, flare nut, tightening of any loose glycol line connections, shifting FCU from one place to another place if required, heating up the freezed glycol line anywhere about the premices to have continuous flow of glycol fluid, repairing the insulation of pipe line of any size by providing shallow tape / GI wire as deemed fit, for fastening the insulation with pipe line, stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with FCU / Heating system, cleaning the air filter including radiator of FCU to the entire, complete all as specified and directed by Engr-in-Charge. Note :-(i) Attending any complaints of different nature in a single day in Corps HQ Complex Plant Room inside / outside will be considered as one job. ii)Any kind of replacement of major items shall be measured and paid for separately under respective item of schedule 'A' iii) . Any nature of complaint related with FCUs, radiators, bursting/cracking/leakage of MS pipe lines, replacement of valves etc will be completed round the clock by suitable trademen (welder with suitable T & P,(including portable heating materials)-01,Skilled mechanic of CHS-01, Plumber/Fitter with helper-each 01, Supervisor-01. iv)Job slip will be maintained by the contractor Supervisor under supervision of concerned JE E/M CHS, suitable communication shall be maintained through JE incharge round the clock. v) Any dely in attending complaint will be directly reported to higher authorities and suitable penalities will be incured from the contractor (Minimum 1000/-Per job)
Dismantling of burner assembly CHS and removing of side cover of boiler capacity 4 lakh kilocal/hr and complete servicing the boiler including exhaust outlet i.e chimmney by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in-Charge.
All as per item no 34 but boiler capacity 3 lakh kilocal/hr.
Dismantling of burner assembly CHS and removing of side cover of boiler capacity 3 lakh kilocal/hr and complete servicing the boiler including exhaust outlet i.e chimmney by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of photo cell as per existing suitable for 3 to 4 lakh kiloCal/hr burner rod assembly, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 7.5 / 10HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 3 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, , complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 1/ 2 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 0.5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of High pressure fuel pipe 1.5 mtr as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of plug top 05 Amps, 3 pin as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of rotary type ON/OFF switches for Fan Coil unit 22mm dia as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of contactor type MNX 12 (AC-15) : 4A, 415 V, 12 A for 5.5 KW with auxillury contactor MNX-A, A600.P600, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of phase failure relay VSP D1, complete all as specified and directed by Engr-in-Charge.
S&F in temp controller digital type Sz-7510P with sensor, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 5A, 240 V AC/5A 28V, DC, 3A 150V, AC, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 10A, 110 V AC, 1/2 HP, 20V AC, 10A 220V, AC, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 3A, 150V AC/5A 240V, AC, 5A 28V, DC. complete all as specified and directed by Engr-in-Charge.
M&L for replacement of diesel filter as per existing (upto 1 ltrs) complete all as specified and directed by Engr-in-Charge.
S&F in replacement of burner nozzle suitable for 3 to 4 Lakh K Cal/Hr, complete all as specified and directed by Engr-in-Charge.
S&F for sequence controller LOA 24 for burner rod assembly of 3 to 4 Lakh K Cal/Hour, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Ignition Transformer electronic type suitable for 3 to 4 Lakh K Cal/hr burner rod assembly,complete all as specified and directed by Engr-in-Charge.
M & L for replacement of burner rod assembly single phase 220 volts, or Equavelent Eco flame Capacity 02-5.6KG/hr, suitable for 3 to 4 Lac Kcal/hr boiler, complete all as specified and directed by Engr-in-Charge.
Supply, connection and testing of thermal heater wires on water supply pipe lines (GI/MS/PPR) for heating of water through minimum 25 Watt per meter in spiral/ straight line shape above outer diameter of pipe with aluminium tape insulation to preserve heat, fiber glass layer, second layer of aluminium tap to hold fiber glass by glass wool minimum 40mm thick with essential tapes complete, complete all as specified and directed by Engr-in-Charge.
Supply and fixing and replacement of Chilled/Hot Water wall mounting indoor type Fan Coil Unit 600 /1.5TR (CFM/TR) Capacity incl 02 Nos of 20mm valve with stainer (inlet&outlet) incl heavy duty PVC pipe for connection, complete all as specified and directed by Engr-in-Charge. (Note : Old Unserviceable wall mounting fan coil unit to be deposited in MES Store Yard)
Supply and fixing in replacement of wall mounting (ECO Panel) Convector heater 2.5KW/Hrs Two heat output setup with auto control and LED temperature display. Diemension-Width 1200mm, height, 450mm depth 90mm with complete fixing accessories, complete all as specified and directed by Engr-in-Charge. (Note : Old Unserviceable converter heater to be deposited in MES Store Yard)
M & L for Servicing of Air Handling Unit capacity 15000 CFM including repair to coil assy by welding if there is any leakage found and testing the same, replacement bearings of motor capacity 7.5 HP/10HP, reassembling/ testing the same including painting of AHU with two coats of aluminium paint over a coat of red oxide primer and cleaning of AHU room, complete all as specified and directed by Engr-in-Charge.
All as per serial item No. 60 here-in-before but of capacity 10000 CFM with electric motor 5.5 HP complete and and cleaning of AHU room, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of star coupling with Rubber Love joint coupling F 225 Suitable for 60 HP TF Pump, complete all as specified and directed by Engr-in-Charge.
S&F V Belt B-77/B-100 suitable for AHU as per sample, complete all as specified and directed by Engr-in-Charge.
Supply, fixing and testing fuel injection nozzle suitable for working on 20 Lac K Cal/Hr oil fired hot water boiler capacity burner, complete all as specified and directed by Engr-in-Charge.
M & L for control wiring of complete AHU of capacity 15000/10000 CFM connecting blower motor of capacity 7.5/10 HP with auto control panel with PVC Copper conductor of not less than 4/6 Sqmm. Including binding of complete wiring with tie , concealed channel as required at site, complete all as specified and directed by Engr-in-Charge.
M & L for Cleaning of Thermic fluid pipe line ducts complete including removing of wastage sand stone ,complete all as specified and directed by Engr-in-Charge.
M & L for removing of old unsv refractory compound from Diesel / oil fired hot water boiler applying the same evenly inside the surface of oil fired hot water boiler with Refactory compond, complete all as specified and directed by Engr-in-Charge.
M& L for welding work as per site reqmt to Leakge in steel pipe, complete all as specified and directed by Engr-in-Charge.
Tools & Labour for attending of break down/day to day complaint or call on attending any break down or maint work in CHS of Cap 20Lkcal/hr checking the serviceability of AHU's/Boilers/fluid lines/AHU's Motors of any capacity for having continuous sreviceability of CHS Plant for any number of time as desired by Engr-in-Charge including servicing of GI Duct use for following of Hot air and replacement of minor spare parts required at site and maint the Fluid Pipe line any where about the premices to have continuous flow of Thermic fluid, repairing the insulation of pipe line of any size ,stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with AHu's Panel / Main Electrical Panel / AHU remote Control Panel including all other related complaints to the entire, complete all as specified and directed by Engr-in-Charge.
M&L for Dismantling of burner rod assy and removing of top cover of boiler capacity 20 lakh kilo/cal/hr model TPA-20/L/P/17 and complete servicing the boiler by using coil shine chemical and removing the complete carbon/oil deposits including repair to coil assy if there is any leakage found and reassembling/testing the same, complete all as specified and directed by Engr-in-Charge.
M & L for servicing to the modulation assembly including replacement of fuel control valve or any other spares required for smooth functioning of modulation assy, complete all as specified and directed by Engr-in-Charge.
M & L for complete servicing to the thermic fluid pump and electric motor of capacity 60HP 2960 RPM, by following services:- (a) Replacement of bearings,oil carbon glands seal or any other spares required for smooth functoning of pump,complete all as specified and as directed. (b) Repair/repalcement of Impeller suitable for 60 HP centrigugal pump (c) Pump Shaft including steel gland bush suitable for Centrifugal pump of capacity 60 HP, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of old unserviceable Air Pre filter including alluminium/stainless steel frame of size 20"x20"x2" for existing AHU unit of capacity 10000 CFM complete all as specified and directed by Engr-in-Charge.
S&F in replacement of old unserviceable main air filter including alluminium/stainless steel frame of size 20"x20"x6" for existing AHU unit of capacity 10000 CFM complete all as specified and directed by Engr-in-Charge.
S&F in replacement of old unserviceable Air Pre filter including alluminium/stainless steel frame of size 24"x20"x2"for existing AHU unit of capacity 15000 CFM complete all as specified and directed by Engr-in-Charge.
S&F in replacement of old unserviceable Main air filter including alluminium/stainless steel frame of size 24"x20"x6"for existing AHU unit of capacity 15000 CFM, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of old unsv off load change over of capacity 1000 Amps, 4 Pole, complete all as specified and directed by Engr-in-Charge.
M&L for Galvanised Iron Pipe Medium grade of size 150 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed by Engr-in-Charge.
M&L for sluice valve Class PN 1.6 of size 150 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed by Engr-in-Charge.
M&L for sluice valve Class PN 1.6 of size 50 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of diesel pump 3 way with 1.5 HP Motor,3 Phase 415 Volts suitable for boiler capacity 20 lakh kilocal/hr all as per site requirement, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of diesel filters for boiler capacity 20 lakh kilocal/hr, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of contactor MNX 70 three pole 100 Amps 415 volts, complete all as specified and directed by Engr-in-Charge.
M&L for Cleaning of MS deisel storage tanks of capacity 2500 ltrs by removing of sludge from tank and scraping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal walls with two coats of black rubber immelsion paint and painting the complete tank from out side with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
M&L for Cleaning of MS diesel storage tanks of capacity 50000 ltrs by removing of sludge from tank and scraping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal walls with two coats of black rubber immelsion paint complete all as specified and directed by Engr-in-Charge.
M & L for replacement of pressure guages 0 to 25 kg/cm sq as per existing, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of digital type volt meter complete with touch control switch 0 - 500 volts complete all as specified and directed by Engr-in-Charge.
M & L for replacement of digital type Amp meter complete with touch control switch and suitable CTs 0 - 300 Amps, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of indicating lamps RYB as per existing, complete all as specified and directed by Engr-in-Charge.
Supply and laying cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with standed aluminium conductor of following sizes 185 sqmm 3.5 Core laid in trenches or passing through pipes ducts or fixed to walls/poles including taking down old cable, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 60 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including suitable size of Bearings ,varnishing, cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
M & L for replacement of push botton type ON/OFF switches as per existing complete all as specified and directed by Engr-in-Charge.
M & L for replacement of U/S Bearings of model UC-208 as per sample complete all as specified and directed by Engr-in-Charge.
Supply and replacement of contactor ML-3, 220 volt 50 Hz, suitable for TF pump panel incl testing and commissioning etc, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Thermal over load relay MN2 type 6 to 10.0 Amps, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Thermal over load relay 10 to 15.0 Amps, complete all as specified and directed by Engr-in-Charge.
Supply and replacement of timer 30 to 120 seconds delay for Main control panel, complete all as specified and directed by Engr-in-Charge.
Dismantling of burner assembly of CHS and remvoing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 1-2 Lakh kilocal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repir to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in-Charge. (4 Months after again service) complete all as specified and directed by Engr-in Charge.
S&F in replacement of complete burner assembly including all connected accessories suitable for 1-2 lakh kilo/Cal/hr including installation,testing & commissioning (As per Sample) complete all as specified and directed by Engr-in Charge.
Supply and fix in replacement of fuel pump suitable for 1-2 Lakh kilo cal/Hr boiler (as per samle) complete all as specified and directed by Engr-in-Charge
S&F in sequence controller suitable for 1-2 lakh kilo/hr with burner rod assembly,complete all as specified and directed by Engr-in Charge.
S&F in replacement of ignition rod suitable for 1-2 lakh kilocal/hr burner rod assembly, complete all as specified and directed by Engr-in Charge.
S&F in replacement of ignition Transformer electronic type suitable for 1-2 lakh kilocal/hr burner rod assembly, complete all as specified and directed by Engr-in Charge.
S&F temp controller digital type DTC 503 with sensor suitable for 1/2 lakh kilocal/hr LAL 2.25 burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of photo cell as per existing suitable for 1-2 lakh kilocal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of burner nozzle suitable for 1-2 lakh Kilocal/Hr complete all as specified and directed by Engr-in Charge.
S&F in replacement of Electrode suitable for burner of capacity 1-2 lakh K/Cal/Hr, complete all as specified and directed by Engr-in Charge.
Dismantling of burner assembly of CHS and remvoing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 6.0 lakh kilo/cal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakages found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in Charge. (4 Months after again service)complete all as specified and directed by Engr-in Charge.
Supply and fix in replacement of fuel pump suitable for 6 Lakh kilo cal/Hr boiler (as per samle), complete all as specified and directed by Engr-in-Charge
S&F in sequence controller suitable for 6.0 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of ignition rod suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of ignition Transformer electronic type suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F temp controller digital type TC513A/TC513AX/TC533AX 85 to 270 Volt AC/DC 50/60 Hz 5 VA DTC 503 with sensor suitable for 6.0 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, (as per Sample) complete all as specified and directed by Engr-in Charge.
S&F in replacement of photo cell as per existing suitable for 6.0 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of burner nozzle suitable for 6.0 lakh K/Cal/Hr, complete all as specified and directed by Engr in charge.
S&F in replacement of Electrode suitable for burner of capacity 6.0 lakhK/Cal/Hr, complete all as specified and directed by Engr in charge.
S&F in replacement of pressure gauage 0 to 20 Kg/cm sq as per existing, complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of thermostate assembly tail type as per existing suitable for 0 TO 30 degree centrigrade temprature, complete all as specified and directed by Engr in Charge.
M & L for disconnecting the all connection in existing panel board complete and re-fixing the same after removing the burnt lugs/thimbles complete including replacing the U/S MCCBS, Contactors, rley, bus bar indicator lamps etc, complete all as specified and directed by Engr-in-Charge. Note- MCCBS, Contactors, rley, indicator lamps, S/Switchs, voltmeter, Ammeter are to be measured and paid seperately.
Supply and fix contactor type 3 TF 33, 415 volts complete all as specified and directed by Engr-in-Charge.
Supply and fix contactor type ML 1.5, 220 volts, complete all as specified and directed by Engr-in-Charge.
Supply and fix over load relay 8 to 12.5 Amps for contactor matching ser No 48 series 3 TF 33, complete all as specified and directed by Engr-in-Charge.
Supply and fix over load relay 1.25 to 2 Amps for contactor matching ser no 49 series 3 TF 33, complete all as specified and directed by Engr-in-Charge.
Supply and fix MCCB with current rating 160 Amps 415 V 4 Pole 36 KA with thermally adjustable complete all as specified and directed by Engr-in-Charge.
Supply and fix MCCB with current rating 200 Amps 415 V 4 Pole 36 KA with thermally adjustable complete all as specified and directed by Engr-in-Charge.
Supply and fix MCCB with current rating 100 Amps fixed type 415 V 3 Pole 16 KA complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of digital type volt meter 0-500 volts, complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of digital type Amp meter complete with suitable CTs 0-300 Amps, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of PVC flexible copper multistrand wire 3 core of 6 sqmm as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of PVC flexible copper multistrand wire 3 core of 4 sqmm as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of gun metal butter fly control valves of 65 mm bore as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of gun metal butter fly control valves of 80 mm bore as per existing, complete all as specified and directed complete all as specified and directed by Engr-in-Charge.
S&F in replacement of gun metal butter fly control valves of 50 mm bore as per existing, complete all as specified and directed complete all as specified and directed by Engr in Charge.
S&F in replacement of gun metal butter fly control valves of 40mm bore as per existing, complete all as specified and directed complete all as specified and directed by Engr in Charge.
M&L for Cleaning of MS diesel storage tanks of capacity up to10000 ltrs by removing of sludge from tanks and scrapping the side walls by means of wire brush or emery paper and wash the same with castic soda and clear water and painting the internal wall with two coats of black rubber emulsion paint and painting the complete tank with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
M&L for Cleaning of MS over head circulation tank of capacity 1000 ltrs of all type of T&P and chemical reqd the same , including welding work to lekage surface including opeaning and refixing the existing insulating material to the externalal surface including painting the complete tank from out side with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
Supply and laying cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with standed aluminium conductor of following sizes 240 sqmm 3.5 Core laid in trenches or passing through pipes ducts or fixed to walls/poles including taking down old cable complete all as specified and directed by Engr-in-Charge.
Supply and laying cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with standed aluminium conductor of following sizes 120 sqmm 3.5 Core laid in trenches or passing through pipes ducts or fixed to walls/poles including taking down old cablecomplete all as specified and directed by Engr-in-Charge.
Supply and laying cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with standed aluminium conductor of following sizes 400 sqmm 3.5 Core laid in trenches or passing through pipes ducts or fixed to walls/poles including taking down old cable complete all as specified and directed by Engr-in-Charge.
Supply and replcement of MS pipe (ERW) heavy duty including fittings complete of size 20 mm dia complete all as specified and directed by Engr in Charge. (Note- The rate include cutting to any levels/shapes like elbows,teesbends etc welding joints wherever necessary as per the site requirement)
S&F in replacement of FCU connection copper pipe 20/16 mm with check nut at both side as per reqd length, complete all as specified and directed by Engr in Charge.
Supply and fix switch socket combination of 5 Amp flush type complete all as specified and directed by Engr in Charge.
S&F in replacement of plug top 3 pin of capacity 5Amp complete all as specified and directed by Engr in Charge.
M&L for Electrical Control Wiring for FCU of any size including electronic display complete as per sample all as specified and directed by Engr in Charge.
Dismantling the existing radiator unit of capacity from 3000 to 6500 K Cal per hour, taking it to nearest workshop cleaning the complete unit with coil shine chemical, detecting the leakage protion by applying nitrogen gas pressure, brazing the leakage protion, refixing the same unit from dismantled location including testing on load complete all as specified and directed by Engr in Charge.
Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 3000K Cal / Hour including dismantling the existing unserviceable, complete all as specified and directed by Engr in Charge.
Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 4500 K Cal / Hour including dismantling the existing unserviceable, complete all as specified and directed by Engr in Charge.
Supply and fixing radiator unit of FCU including connecting with the unit and making it leak proof of consisting of copper coils covered with aluminium finsing as per existing size of capacity 6000 K Cal / Hour including dismantling the existing unserviceable, complete all as specified and directed by Engr in Charge.
Supply and fix in replacement of needle valve 3/8 inch BSP as per existing complete all as specified and directed by Engr in Charge.
S&F in Repair/Replacement of fan coil unit parts, duel shaft electric motor of capacity 30 Watt 930 RPM, 3 speed as per existing complete all as specified and directed by Engr-in-Charge
Supply and replacement of PP-R pipe with fitting of 40 mm dia complete all as specified and directed by Engr-in-Charge
Supply and replacement of PP-R pipe with fitting of 32 mm dia complete all as specified and directed by Engr-in-Charge
Supply and replacement of PP-R pipe with fitting of 25 mm dia complete all as specified and directed by Engr-in-Charge
Supply and replacement of PP-R pipe with fitting of 20 mm dia complete all as specified and directed by Engr-in-Charge
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation , laying of pipes , cables etc. or for manholes pier holes poles not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard /dence soil complete all as specified and directed by engr in Charge.
Returning filling in soil including spreading levelling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr in Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 above the starting point including spreading and levelling complete all as specified and directed by Engr in Charge.
Supply and spreading sand for cable cushioning of electric cable 8cm below cable and 15 cm above cable including watering and well ramming in layers complete all as specified and directed by Engr-in-Charge. Note : Punned thickness of 18 cm will be measured and paid for.
Supplying & laying Un-reinforced precast concrete cable cover class LV 2 flat size 250mm x 150mm x 40mm, complete all as specified and directed by Engr-in-Charge.
M&L for Galvanised Iron Pipe Medium grade of size 50 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by Engr-in-Charge.
M&L for Galvanised Iron Pipe Medium grade of size 40 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by Engr-in-Charge.
M&L for Galvanised Iron Pipe Medium grade of size 25 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by Engr-in-Charge.
M&L for Galvanised Iron Pipe Medium grade of size 20 mm dia complete with all fitting and fixed complete to walls and ceillings or laid in floors complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of fuel pump suitable for 1-2 Lakh kilo cal/Hr boiler (as per samle) complete all as specified and directed by Engr-in-Charge
S&F temp controller digital type (TC513A/TC513AX/TC533AX 85 to 270 Volt AC/DC 50/60 Hz 5 VA)/ (DTC 304-2) with sensor suitable for 3-4 lakh kilo/Cal/hr LAL 2.25 burner rod assembly (As per sample), complete all as specified and directed by Engr in Charge.
S&F in sequence controller suitable for 3-4 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr in Charge.
S&F in replacement of ignition rod suitable for 3-4 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr in Charge.
Supply and fixing and replacement of chilled/hot water fan coil unit (FCU) vertical type floor mounting 2.5 TR capacity complete all as specfied and directed by Engr-in-charge.
Supply and fixing and replacement of chilled/hot water fan coil unit (FCU) wall mounting 2.0 TR capacity complete all as specfied and directed by Engr-in-charge.
Supply and fixing and replacement of wall mounted (ECO Panel) convector heater 2.5 KW/Hrs two heat out put set up with auto control and LED temperture display. Dimension - width 1200 mm, height 450 mm ,depth 90mm with complete fixing accessories. (Note : Old U/S converter heater to be deposited in MES store Yard
EESSI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .