ADDITION ALTERATION TO SNCOS BILLET COOK HOUSE AT SNCOS MESS PROVISION OF TOILET AT BUILDING NO P 63 POWER FENCING NEAR SWIMMING POOL AND CERTAIN MINOR WORKS AT AF STATION GORAKHPUR

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre depth for foundation etc and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in soft/loose soil complete all as specified and directed

Removing excavated material to a distance exc 250 mtrs and n.exc. 500 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M/L PCC type D-2 1:4:8 (40 mm graded aggregate) as in foundation filling, sub base and mass concrete complete all as specified and as directed.

M&L RCC M-25 design mix as in foundation, footing, base of col, beam, lintel ,plinth beam, bases for column etc all as specified ands as directed.

M&L RCC M-25 design mix for columns and etc all as specified ands as directed.

M&L RCC M-25 design mix for slab and chajjas etc all as specified ands as directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class B bricks laid straight or curved in plan any radius half brick thick wall built in cement mortar 1: 4 complete all as specified.

M&L for rendering 15mm thick in CM 1:6 on fair faces and of brick work or concrete surface finishing the surface even and smooth without extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 5mm thick in CM 1:3 on ceiling surface and finishing the surface even and smooth without extra cement complete all as specified and directed.

M&L for use and waste form work to sides of concrete foundation, footing, bases of columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to sides of concrete columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to sides of concrete beam, side and soffits of plinth beam and similar works or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, Chhajja, and similar work n. exc. 200 mm thick, rough finished surface of concrete complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, slabs and chhajjas hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8 to 10 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for stirrups hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in floor complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate in roof kerb of mud stops, rounded or chamfered on edges and base of over head tank complete all as specified and directed.

M&L for water proofing treatment to flat roof and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the roof surface. (ii) Applying 15 mm thick plaster on concrete roof surface in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement (Note: Water proofing compound shall be measured and paid separately). (iii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iv) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (v) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torch on' method as per manufacturer's instructions complete all as specified and directed.

M&L for 40mm thick brick tiles laid on 15mm thick screed bed of cement mortar 1:6 and pointing with CM 1:3 mixed with linseed oil @ 5% by weight of cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make:- Dr Fixit Pidiproof LW+ or equivalent in specified make.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 350x250x7 /450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for screed bed or bedding layer in CM 1:6, 15mm thick complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall or concrete surfaces in CM 1:4 finished rough for wall tiling complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame at site as per specification and drawing on Sl page No.161 of SSR (part-II) complete all as specified and directed.

S&F in opening Solid door frame (Factory made) of size 50mmx47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as per specification and as per drawing on Sl page 160 of SSR (Part II) complete all as specified and directed.

S&F aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed.

S&F 100mm long type C-21, Butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised complete all as specified and directed.

S&F box type steel windows with side hung shutters including box type hinges with steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges with steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane 4mm thick complete all as specified and directed.

M&L for painting synthetic enamel paint two coats on new steel surfaces over a coat of red oxide primer including preparation of surfaces complete all as specified.

S&F low level flushing cistern PVC 10 ltrs capacity with all internal fittings, bracket and 32mm bore PVC flush pipe, complete all as specified and directed.

S&F vitreous china wash basin white oval type bowl size 550x400 mm including waste pipe, brackets complete all as specified and directed.

S&F CP waste coupling 32mm dia complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking/WHB plat forms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F floor trap 'P' or 'S' type, 75 mm dia complete all as specified and directed.

S&F Soap dish vitreous china white approximate size 160x160x 90 mm complete all as specified and directed.

S&F angle cock, long shank fancy type C.P. cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1 :3 for concealed water tubing, cutting n.exc. 10cm girth complete all as specified and directed.

M&L GI tubing, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L GI tubing, 20mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore dia of pipe pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts serewed for iron pipe complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl urinal spreader and providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F vitreous china water closet squatting pan, 'Orrisa' pattern, size 580x440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F CP brass shower rose 125mm size including fixed to steel pipe or union complete all as specified and directed.

S&F CP grating 125mm dia grating with waste hole of stainless steel complete all as specified and directed.

S&F chromium plated towel D type, rail 600 mm long complete all as specified and directed.

S&F bib tap 15mm bore, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F gun-metal, globe ore gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore or brass ferrule complete all as specified and directed.

S&F PVC(SWR) cowl 100 mm dia bore complete all as specified and directed.

S&F salt glazed stone ware gully trap square or rounded mouthed P or S of size 150X150 mm including CI grating including excavation earth work concrete in beds surrounds kerbs etc complete all as specified and directed.

S&F gully trap cover 400X400mm by 50 mm thick PFRC (Pre cast reinforced) complete all as specified and directed..

S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints complete all as specified and directed.

S&F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints walls complete all as specified and directed.

S&F PVC (SWR) 75mm bend complete all as specified and directed.

S&F PVC (SWR) 110mm bend complete all as specified and directed.

M&L for preparation of new surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Removing excavated material to a distance n.exc. 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M/L PCC type C-2 1:3:6 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for concrete bed to drain pipes of 150mm internal dia pipe in PCC 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under ,and haunching against sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 150 mm internal dia NP-2 pipe laid in trenches and jointed complete all as specified and directed .

M&L for cutting into existing manhole for connecting drains, making good to drain pipes and rendering and cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm integral dia of pipes complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in benching, padding, coping etc including necessary form work complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded mechanically crushed stone as in cover slab for manholes etc, set and jointed in cement mortar 1:4 including necessary form work complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exceeding 10 cm but n.exc. 20 cm wide rough finished surfaces of concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40 mm graded mechanically crushed stone aggregate as in surface channel and drains finished even and fair complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for 150mm thick cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

S&F CP bottle trap for WHB having minimum water seal 25mm complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L for preparation new plastered surface of wall and applying two coats of oil bound distemper over a layer of 1mm thick Birla putty as base coat and primer etc complete all as specified and directed.

Surface excavation n.exc. 30 centimeter deep and averaging 15 centimeter deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

Material and labour 80mm thick, rubber moulded precast concrete interlocking tiles M-35 grade, factory made, over and including 25mm thick sand cushioning and joints filled with fine sand incl leveling tamping & sweeping complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

All as per Item No. 90 above but exc 1.50 Sqm and n.exc 4 sqm each.

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as directed.

M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I (2009)

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F mild steel work as in hold fast of flat iron 25x3 mm conforming to Fe 410-0 or Fe 310-0 as directed.

M&L for preparing surfaces of chowkhat of new or old, of any description and girth not otherwise described, treating ends of posts, back of chowkhats, etc area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed.

M&L for Preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any descriptions and girth, treated with tar or coal tar black paint to treating small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc area n exc 0.1 Sqm complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolt, plate type, stove enamalled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts & nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, galvanised wire staples, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg height complete all as specified and directed.

S&F two (double) legged floor door stopper of aluminium body and tongues anodes with hard drawer steel spring fixed in floor of 150mm complete all as specified and directed.

S&F 300mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.

S&F curtain rod/rail with drapery rod plastic coating fancy type 25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.

S&F prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 100mm size mild steel hasp and staple stove enamelled black including bolt to hinge plate and fixed with screws complete all as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/ blankets, any thickness, including cover filets complete all as specified and directed.

M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I. wire (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified and directed.

Dismantling Asbestos cement plain or corrugated steel sheeting incl ridges any gauge/thickness nainital or similar pattern as in roof covering complete all as specified and as directed.

S&F for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in floor laid in panels finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as directed.

All as per item No. 115 above but 20mm bore.

S&F bib tap,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and. complete all as specified and directed.

S&F stainless steel sink with drainage board made out of 0.80mm thick steel sheet for kitchen with plug, washer waste pipe, MS cantilever bracket, connection union overall size 495x420mm with bowl size 410x330x160mm complete all as directed.

Dismantling water tank of capacity exc 500 ltrs but n.exc 1000 ltrs complete all as directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.

S&F machine cut pre-polished Kota stone slab 20 to 25mm thick (minimum size 30cmx 45cm) as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to achieve mirror finish complete all as specified and directed.

S&F for machine cut Kota stone slab 18 to 20mm thick (minimum size 30cmx 45cm) as in skirting/dado or on vertical surfaces laid over and including cement screed bed 10 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails conforming Fe-290 (Gde E-165) complete all as specified and directed.

S&F GI tubing 25mm bore medium grade with all fittings, fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F GI nipple 4" long, upto 25 mm dia medium grade ISI marked complete all as specified and directed.

S&F GI reducer upto end dia 25/40 mm, medium grade ISI marked complete all as specified and directed.

S&F GI reducer upto end dia 15/25 mm, medium grade ISI marked complete all as specified and directed.

S&F GI Union 15 mm dia medium grade ISI marked complete all as specified and directed.

S&F brass non return valve heavy duty (ISI marked) for any type/make and capacity of Geyser suitable for 15mm bore pipe complete all as specified and as directed.

M&L for cutting/opening/threading of existing steel water tubing of size upto 25mm dia for and including insertion of tee reducer for branch connection of 15mm bore pipe all as reqd and as directed.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

All as per srl item No 133 above but for one socket outlet 3 pin 5 amps independent controlled by one switch but not below the main board in the same vertical plane

All as per srl item No 133 above but for one socket outlet 3 pin 5 amps controlled by one switch on the same board.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 37 to 41 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, 5 pin, 5 amps flush type complete all as specified and directed.

S&F modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F switch piano, flush type 15 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, flush type, 2 in 1, 3 pin 5 & 15 Amps, 230 Volts, multipurpose complete all as specified.

S&F modular fan regulator 240 V electronic step type, 1 module complete all as specified and directed.

S&F ceiling rose surface bakelite, 65X50 mm three terminals complete all as specified and directed

S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F PVC cassing & capping of size 25 mm run in wall / surface for existing telephone cable/Lan cable complete all as specified and directed.

S&F wall mounted batten integrated LED plastic channel with tube of capacity 20 Watt (4ft), integral sleek extruded polycarbonate LED channel with white acrylic cover and integrated electronic driver complete fixed/connect properly complete all as specified and as directed. Make:-Model No. Bajaj LED Batten 20W CDL Plastic of Bajaj or equivalent in Havells/Philips/C&S

All as per Item No. 147 above but for capacity 9-10 watt (2ft). Make:-Model No. Bajaj LED Batten 9W CDL Plastic of Bajaj or equivalent in Havells/Philips/C&S/Crompton

S&F LED flood light fitting complete with energy saving environment friendly, long life, exclusive pressure die cast with IP-66 protection with high power LEDs of capacity 80 watts mounted properly on wall surface with the provisioning of suitable sizes of MS clamps, nuts, bolts and washers and masonry work complete all as specified and directed. Make:- Crompton cat part no. LFL-80-CDL/60 or equivalent in Havells/Philips/C&S/Bajaj

S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, 6.0 Sqmm, twin core flat, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

S&F recessed mounting 2'x2' LED 36 Watts, 5700K, panel light for dust-free installation, white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover etc fixed properly in false ceiling/POP ceiling of suitable reqd dimensions and connecting complete all as specified and as directed. Make : Bajaj/Philips/Havells/C&S.

S&F recessed mounted LED down lighter elegantly designed pressure die-cast aluminium heat sink for efficient heat dissipation and separate replaceable electronic driver 22 Watts (5700K) with diffused optics fixed properly in false ceiling of suitable reqd dimensions and connecting complete all as specified and as directed. Make : Bajaj/Philips/Havells/C&S.

S&F sub main wiring with two single core PVC insulated cable with 2.5 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 1.5 Sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade 20mm bore including accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of wall/ceiling complete all as specified and directed.

S&F of sub main wiring with two single core PVC insulated cable with 6.0 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade 20mm bore including accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of wall/ceiling complete all as specified and directed.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making connection with twisted copper flexible wire 23/0.0076 mm complete all as directed.

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, 1400 RPM with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as directed. Make: Havells model No. Turbo Force or equivalent in Bajaj/CG.

S&F wall mounted fan complete AC 240 volts 50 Hz single phase of size 400mm sweep including making connection complete all as specified and directed. Make : Model Platina HS of Havells of equivalent in Crompton/Usha/ Bajaj

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed.

S&F MCB SPN 40 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F, installation, testing of electric Water heater storage type geyser (with EPAC Inner Tank & ABS Body with Metallic Finish Color Panel) of capacity 50 liters suitable for single phase 230 Volts, AC, 50Hz, BEE 5 star rating complete with all mounting arrangement, Hot & Cold water connection pipe, 3 pin plug top etc as required at site complete all as specified and directed. Note:- Any disturbed surfaces of wall will be matched with existing colour surfaces. complete all as specified. Make: Model Pebble 50L of Make Havells or equivalent in V-Guard/Bajaj / Racold

S&F, installation, testing of electric Water heater storage type geyser (with EPAC Inner Tank & ABS Body with Metallic Finish Color Panel) of capacity 25 litres suitable for single phase 230 Volts, AC, 50Hz, BEE 5 star rating complete with all mounting arrangement, Hot & Cold water connection pipe, 3 pin plug top etc as required at site complete all as specified and directed. Note:- Any disturbed surfaces of wall will be matched with existing colour surfaces. complete all as specified. Make: Model Pebble 25L of Make Havells or equivalent in V-Guard/Bajaj / Racold

M&L for making hole carefully in the bottom surface of existing RCC roof of depth not exceeding 7 cm for and including mild steel fastener threaded type hook (thread portion length not less than 5 cm and total length of hook 15-20 cm of dia 10mm with its nuts, which shall be tightened properly in aforesaid RCC roof hole for mounting of 01 No ceiling fan and testing complete upto satisfaction level in running condition complete all as specified and directed. Note: Any disturbed surfaces of roof will be matched as existing colour surface.

S&F ceiling fan complete with all accessories of capacity 230V, 1200 mm sweep, BEE 5 star rating complete all as specified and directed. Make-Havells, Model No - ES 50 Premium 5 or equivalent in Bajaj/Crompton.

Supply, installation, testing & commissioning of solar power fencing energizer with inbuilt Alarm unit and 90 dB Siren complete with following electrical parameters as confirming to Safety standard : IEC 60335-2-76, IS-8437 (Part-I human safety) and EMC directives complete all as specified and directed:- (a) Operating voltage 12 V DC (b) Input current 500 mA (c) Output Voltage 6 KV / 9.9 KV Pulsating (d) Pulse interval 1.2 Sec (At 500 Ohms non inductive load) (e) Nos of pulses 50 pulses/Min (f) Pulse width 3 mili Sec (at 500 Ohms non inductive load) (g) Output power upto 5 Joules Make: Crown Solar Power fencing system, Model : CS 250 or equivalent as approved.

S&F live light as design by OEM complete all as specified and directed.

S&F maintenance free Battery 12 Volts, 7 AH with backup more than 5 hours complete all as specified and directed.

S&F of Lightning diverter kit with all parts and accessories as design by OEM complete all as specified and directed.

S&F outdoor console rack as design and suitable for power fence system by OEM complete all as specified and directed.

S&F end corner post 40 Sqmm of 1.5 Mtr length duly galvanised with support complete all as specified and directed.

S&F intermediate post insulators with reqd sizes of nuts, bolts and washers, fixed properly in existing holes of angle iron intermediate post complete all as specified and directed.

S&F end strain hooks as design by OEM complete all as specified and directed.

S&F end strain insulators as design by OEM complete all as specified and directed.

S&F joint clamps suitable for HT wire of size 2.59mm dia as OEM manufactured complete all as specified and directed.

S&F wire tightness suitable for HT wire of size 2.59mm dia as OEM manufactured complete all as specified and directed.

S&F HT wire of size 2.59mm dia as OEM manufactured complete all as specified and directed.

S&F PVC insulated and PVC sheathed copper stranded conductor of size 6.0 Sqmm which shall be passed through HDPE conduit of suitable size complete all as specified and directed.

S&F warning sign board of suitable dimensions as design by OEM complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

ANIRUDH ENTERPRISES

M/S NITISH ASSOCIATES