8572/GWL/E8 SPECIAL REPAIR TO SEWAGE SYSTEM AT SV COLONY UNDER AGE B/R-1 AT MORAR CANTT UNDER GE GWALIOR

Amount

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of brickwork, plain cement concrete or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built or cement concrete, in cement mortar 1:4 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed.

M & L for brick work with sub class `B' bricks, straight or curved on plan, exc 6m mean radius, (except bricks) built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 10mm thick on the ‘other than fair faces' side of lathing in cement mortar 1:4 over brick/concrete surfaces complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar (1:4) and surface finished even and smooth, complete all as specified and directed

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L Reinforced Cement Concrete (Nominal Mix) Type B1 1:2:4 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild TMT steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc as in any type of soil complete all as specified and as directed.

Excavation in trenches n exc. 1.5 m wide and exc 1.5m deep and n.exc 3.0 m deep for foundation,etc.or for shafts, wells cesspits, manholes, pier holes,etc.n' exc.10 sq m on plan and getting out inany type of soil complete all as specified and directed.

Excavation in trenches n exc. 1.5 m wide and exc 3m deep and n.exc 4.5 m deep for foundation,etc.or for shafts, wells cesspits, manholes, pier holes,etc.n' exc.10 sq m on plan and getting out in any type of soil complete all as specified and directed.

Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and directed.

M&L for cement concrete bed 1:4:8 type D2 to 100 mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 100 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and directed.

M&L for cement concrete bed 1:4:8 type D2 to 150 mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 150 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

Demolition and breaking up drain pipes of 200 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and directed.

M&L for cement concrete bed 1:4:8 type D2 to 200mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 200 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

Demolition and breaking up drain pipes of 300 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as specified and directed.

M&L for cement concrete bed 1:4:8 type D2 to 300mm dia drain pipes including forming cradles; in complete all as specified and directed.

M&L for 300 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

Demolition of concrete in ground floors and pavings ect n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L cement concrete in foundations, filling and mass concrete 1:4:8 type D2 using 40mm graded sand stone aggregate complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B1 using 20mm gradedin roof kerbs or mud stops, rounded or chamfered in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platescomplete all as specified and directed.

M&L,75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection with finished even and smooth without using extra cement complete all as specified and directed.

M&L,cutting into existing manholes for connecting new drains of 100 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L,cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L,cutting into existing manholes for connecting new drains of 225 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Dismantling of water tank exc 250 ltrs and n. exc 500 ltrs capacity and removing from site complete all as specified and directed.

S&F,500 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball /float vavle high pressure of PTMT with epoxy coated aluminium rod and high density platic ball screwed for iron pipe and fixed all as spd and directed.

Taking up or down 15 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed.

S&F, 15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified

Refixing 15mm bore old steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed

Refixing 20 mm bore old steel tubing and connections in new or old positions (walls, ceiling, floor etc) complete all as specified and directed

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed complete all as specified and directed.

Demolition/dismatling and breaking up drain pipes of any dia (Salt glazed ware, AC or Reinforced concrete ect ) set in cement mortar or fixed to wall ect complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) bends any radius complete all as specified and directed complete all as specified and directed.

S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S&F for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S&F, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for Providing two coats of tap creat , M/S Cico /Pidilite , M/S Pidicrete /Nitobond M/S Fos Roc chemical mixed in proportional ratio 1:1 one part of chemical ,one part of cement slurry ,complete including curing surfaces applied,including complete in any postionall as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

S&F in repair water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc. excluding flushing cistern complete all as specified & directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified & directed.

S&F in repair pedestal pan std size and tap, including connection to drain and flusing pipe and seat cover closed pattern with flat bottam, anc cover and mild steel cromium plated or hinging device etc complete all as specified.

S&F in repair waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

S&F, in repair 32 mm bore PVC waste pipe and 65 cm long flexible complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) all as specified and as directed all as specified and as directed

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in leveling course complete all as specified and as directed all as specified and as directed

M&L non skid ceramic coloured tiles 7to8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over screed bed or bedding layer 15 mm thick of cement mortar 1:6 complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300mmx300mmx7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement plaster 1:4 on the other side of lathing and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for cement concrete type D-2, 1:4:8, (40 mm graded aggregate),75 mm thick, as in sub base for floor etc complete all as specified and directed.

M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in coloured cement and pigment glossy finish rubber mould casted laid dry over sandd cushioning complete all as specified and directed.

M&L 80 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confirming to IS 15658-2006 in colour cement and pigment glossy finish rubber mould casted laid dry over sandd cushioning complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for chequered cement concrete tiles 250mm x 250mmx 22mm thick, set jointed and pointed in cement slurry in floors with coloured cement and pigments complete all as directed including 15mm thick screed bed in CM 1:6 complete all as specifed and directed

Taking of liquid/solid content from sump/septic tank either manually or by pumping clearing thoroughly including disposal of liquid/solid content out of the Cantt Area ,depositing in pit and covering with layers of earth complete all as specified and directed .

Construction of Septic tanks including excavation, in any type of soil, foundation In PCC 1:2:4 type B-2, brick work in CM 1:4, RCC M20 (Nominal Mixed) (with and including reinforcement), Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent pipe shaft and sludge chambers etc complete for 100 users complete all as specified and directed and shown in drawing No. CEBZ/TD/80/2011 Sheet 1/4 to 4/4.

Construction of Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-20 (Nominal Mixed)Concrete type C2, including intercepting chamber, screen chamber Brick work in CM 1:4, RCC cover slab in M-20/ Brick Masonry/ filling with brick bats, complete of size 1.8 m in dia and 4.50m in deep (effective depth) all as specified and directed shown in drawing No.CEBZ/TD/78/2011 Sheet 1/2 & 2/2.

M/S ISLAM AND BROTHERS

M/s Ratan Lal Jain and Co.