INTERLOCKING ROAD MAIN GATE OF OFFICE COMPOUND TO RAIN BASERA AT NP SAHASPUR DISTT. BIJNOR

Construction of Interlocking Road & Rcc culvert near Office Campus At Nagar Panchayat Sahaspur Distt. Bijnor

Earth work in filling upto 5km distance including supply of all material,labour and T&P etc.required for proper completion of work.

Cement concrete in 1:4:8 with cement,coarse sand and brick ballast of 2cm guage including supply of all material,labour and T&P etc required for proper completion of work

M-150 brick work in One part cement and Three part Course sand mortar in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 307.

12 mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work

Cement concrete in 1:2:4 with cement,coarse sand and stone ballast of 2cm guage including supply of all material,labour and T&P etc required for proper completion of work

WBM Grading 3 (22.4-53 mm Stone ballast) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Supply & fitting 80 mm thick Precast cement concerete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P. cement, smooth high gloss finish, skid reditant. Manufactured from rubber moulds through vibro-compression machanism. the compressive strength of concrere paver block shall not be less than 30MPA (M-30) and weight 5kg per no confirming to IS:15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P taxes etc required for proper completion of the work as directed by engineer-in-charge. as per Additional item road furnishing work no. 5(2).

R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 in RCC Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc.

Mild steel or iron of small size and sections such as holding down bolts,hold fast.tie roads,grating etc (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work. As per S.I. No. 502 of Ch. 10.