Formation of B.T Surface at Abdulkalam nagar 162078R13327, North housing unit street 1 162078R13268, North housing unit north south road 5 162078R13342,Amul nagar 2nd street in ward no.78, Thillai nagar west east road 1 162079R13368, Kallamedu E b

Amount

Charges for cutting the B.T surface to 5 to 7 cm depth using milling machine, conveying the Milled waste materials to at least for 20 km distance including hire and running charges for the machine, conveyance charges, unloading at unobjectionable place, cleaning the milled surface as to avoid slippery including all other incidental and unforeseen item etc. complete as per the direction of the departmental officers

Providing and laying,Spreading and compacting graded stone aggregate to Wet mix macadam(WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base /base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material charges and machinery fuel charges complete as per clause 406 of MORTH specifications

Providing and laying prime coat of 7kgs/10sqm over WMM Surface treated with primer using 7kgs of Bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder using tack coat emulsion distributor(RS1) ,including labour charges for applying the required quantity of Bituminous binder as prime coat manually etc.., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying Tack coat of 2.5kgs/10sqm over WMM Surface treated with binder using 2.5kgs of Bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder ,including labour charges for applying the required quantity of Bituminous binder using tack coat emulsion distributor(RS1) or as prime coat manually etc.., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying Tack coat of 2.0kgs/10sqm over Existing BT Surface treated with binder using 2.0kgs of Bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder ,including labour charges for applying the required quantity of Bituminous binder using tack coat emulsion distributor(RS1) or as prime coat manually etc.., complete as per 502 of MORTH Rev-5 Specifications

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1 m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1 m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70KN power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat seperately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V

Providing and laying 50 mm compacted thick Dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm , 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 46.28 kgs(add 10% Plastic waste) of VG60/ VG70 bitumen,4kg of plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mix to uniform thickness of 40mm /30 mm with mechanical paver to the specified grades and cross sections and consolidated by 80-10 tonne vibratory/ pneumatic roller to the required density etc., including labvour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler , tipper trucks , paver finisher /9m paver finisher , vibratory / pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflecting glass beads @ 250gsm per Sq.m area thickness 0f 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and holes etc., complete. (as MORT & H specification No. 803).

A S P AND CO (BID ID -1104868)

pskassociate (BID ID -1104686)

M S ENGINEERS (BID ID -1104804)