SPECIAL REPAIRS OF ROOF TREATMENT, WALL PLASTER, TILLING, RE-WIRING AND COURT YARD FLOORING IN BLDG NO P-40 (01 TO 8) OR MD ACCN ZONE 3 OF 54 ARMD REGT AT BABINA CANTT UNDER GE BABINA

Amount

Taking down cement plaster on brick walls or concrete surfaces etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Demolition of PCC/lime concrete (Other than Ground flooors) terracing including felt in any description and in any position over roof etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) incl tiles not exc 15cm thick in ground floor and paving below or above ground level complete all as specified and directed.

M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed.

M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L, for joint free coloured vitrified tiles tile 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L, for joint free coloured non skid dark/light ceramic tile 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, for rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.

M&L, for joint free coloured vitrified tiles tile 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L, for joint free Glazed ceramic dark/light coloured tiles 300mm x 450mm and 7 to 8 mm thick, in skirting, dados(incl border on top) , risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles dark/light patern complete all as specified and directed.

M&L, for 15mm thick grainte slab of any shade as approved by GE as in kitchen platform bedded and joined with grey cement slurry and joined with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L, for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in floors, laid in alternate panels and finished even & smooth with using extra cement complete all as specified and directed.

M&L, for Glass dividing strips, 3mm thick and 38mm wide, inserted in position in floors complete all as specified and directed.

M&L, for PCC 1:3:6 type C1 75 mm (using 20 mm graded stone aggregate) thick finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 80 mm thickness M-40 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006 laid dry over sand cushion complete all as specified and as directed.(Sand cushion shall be measured and paid separately)

M&L, for chequered tile (cement ) 25x25x2.2 CM thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed .

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) and removing from site complete all as specified and directed.

Taking down shutters of any descrption n.exc 1Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any descrption exc 1 Sqm and n.exc 2 Sqm each and removing from site complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F, 2nd class HW plain, solid straight chowkat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joint scomplete all as specified and directed.

S&F Pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S & F powder coated aluminium window/ventilator colour as approved by GE with double hung shutter (both gauged and glazed ) including alumunium grill of mesh aparture size 50x50mm made out with 6mm dia aluminium round bar fixed with GI wire mesh cloth 0.46mm dia of wire and 1.18mm aperature , both fixed on aluminium frame 126 mm x 50 mm x1.5 mm thick separately , shutter with bottom rail, middle rail, top rail and styles of size 44.45 mm x 47.62 mm x 1.2 mm thick as per IS 737-1986 and glazed with tinted glass (Modi guard ) 5 mm thick as per standard practices and with alumunium powed coated handle & tower bolt arrangements etc complete all as specified and as directed.

S&F, 35 mm thick Flush shutters, factory made, solid core construction, with block board core and plywood face panels, with decorative face veneers on one faces with lipping to match complete all as specified and directed.

S&F, 35mm thick factory made plain, framed, panelled shutter (two panel) with lock rail and 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Pt-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F, 35mm thick factory made plain, framed, glazed & skelton shutter 1st class hard wood, open rebated and prepared to receve glass, gauze etc( with out sash bars ) The size of rail and stile as per IS-1003 (Pt-I) Kiln seasoned and chemicallhy pressure treated complete all as specified and directed.

S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.

S&F factory made solid panel PVC door shuuter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II, complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in bands, bed plates, hold fasts etc including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for preparing surfaces of ends of posts backs of chowkhats etc of wood or steel new or old, exceeding 0.1 Sqm but not exceeding 0.5 Sqm each and treating with tar or coal tar black paint complete all as specified and directed.

M&L preparing surfaces of small articles such as stops covers gully gratings, holdfasts, end of posts of chowkhat etc of wood steel or iron new or old area not exceeding 0.1 Sqm each and treating with tar or coal tar black paint complete all as specified and directed.

S&F, 300 mm, ordinary rat rail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average sidth of aperture 1.40 mm complete all as specified and directed.

S&F, butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S&F, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised 100mm size complete all as specified and directed.

S&F aluminimum anodised barrel tower bolts of extuded section of size 150 mm complete all as specified and directed.

S&F, aluminimum anodised barrel tower bolts of extuded section of size 100 mm complete all as specified and directed.

S&F, Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extuded section or cast aluminium alloy complete all as specified and directed.

S&F, Extruded aluminium alloy handles, fabricated, anodised, 150 mm size complete all as specified and as directed

S&F, Extruded aluminium alloy handles, fabricated, anodised, 100 mm size complete all as specified and directed.

S&F, 150mm floor door stopper aluminium alloy body complete all as specified and directed.

S&F, in repair Aluminium powder coated rod 25 mm ext. dia for curtain rod complete all as specified and directed.

S&F in repair knob for drapery rod complete all as specified and directed.

S&F in repair Aluminium powder coated brackets for drapery rod complete all as specified and directed.

Taking up and down steel tubing and connections for refixing or removing to store bore of pipe 15 mm complete all as specified and directed.

Taking up and down steel tubing and connections for refixing or removing to store bore of pipe 20 mm complete all as specified and directed.

S&F, tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 15 mm including concealing of tubes where ever directed and required complete all as specified and directed.

S&F, tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 20 mm including concealing of tubes where ever directed and required complete all as specified and directed.

Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc) of 15 mm bore including cleaning and concealing of tubes wherever complete all as specified and as directed.

Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc) of 20 mm bore including cleaning and concealing of tubes wherever complete all as specified and as directed.

S&F, in repair 15mm dia brass bib cock, cast copper alloy with butterfly handle, screwed down screwed for iron pipe or for brass ferule complete all as specified and directed.

S&F, in repair.15 mm bore stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated concealed type screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F, in repair 15 mm bore stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F, PVC connections 15mm dia for wash hand basin and low level flushing cistern of 450 mm length brass chromium plated nuts at ends to connect pipe or sanitary fitting complete all as specified and directed.

S&F, in repair Swivel shower of chromium plated of size 65 to 90 mm for fixing with 15mm bore pipe complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 superficial area not exceeding 150 Sqcm complete all as specified and directed.

S&F in repair PVC Grating Square 150mm with hinge (openable) complete all as specified and directed.

S&F, in repairs kitchen sinks made of stainless steel with drainage board 1mm thick with plug, washers, wastes, including fixing (antilever brackets and connecting union to pipe overall size 915mm x 460m bous size 410mm x 330mm x 160mm) complete all as specified and directed.

S&F, in repair S S plate rack for utensils of size 900x750 mm made of 1.00 mm thick sheet of approved make complete all as specified and directed.

S&F in repair wash hand basin vitreous china (flat back) white including cutting for and pinning in ends of brackets complete size of WHB (550 x 400mm ) complete all as specified and directed.

M&L, vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed .

S&F, in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.

Supply and fixing in repair waste fitting brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts, flanges and bedded in red lead cement and other and fixed 32 mm coupling including PVC Waste pipe 750mm long complete all as specified and directed.

Supply and fixing in repair pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold" complete all as specified and directed.

S&F in repair Brass cromium plated towel rail 20mm dia 60 cm long between flanges complete all as specified and directed.

S&F in repair Brass cromium plated Brackets for towel rails complete all as specified and directed.

Cutting , chases, pinning in, wherever required in brick wall for inserting bond stones and like making good to facing and souroundings, cutting exceeding 20 cm in girth complete all as specified and directed.

Taking down exiting AC/PVC rain water /waste pipe from wall/ floor complete all as specified and directed

S&F,110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F,110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F,110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L for brick work (Except Brick) with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ;B; bricks old size half brick thickstraight or covered on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

Cutting out cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces as in ceiling, finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth as in chajja and walls etc complete all as specified and directed.

M&L for newly plastered surface and applying two coat of oil bound distemper and 1mm thick white putty on walls etc complete all as specified and directed.

Preparing new plastered surfaces and applying Two coats of cement base paint and one coat of white putty on surfaces of walls etc complete all as specified and directed.

M & L Preparing newly plastered surfaces of Ceiling and applying two coats of white wash etc complete all as specified and directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exc. 250 liters but not exc. 500 litres complete all as specified and directed.

S&F, capacity 500 litrs rotational moulded polyethylene water storage tanks triple layered, white (cylindrical vertical with closed top ) hoisted and fixed in position capacity 500 litrs. Make: Sintex in white colour,internally/Polycon/Dhara.

S&F in repair Gun - metal, globe or Gate valves , with iron wheel head ,screwed both ends for iron pipe of dia 20 mm complete all as specified and directed. ISI Marked

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe of 20 mm bore or brass ferrule complete all as specified and directed.

S&F, Fremed work such as grills,gratings, etc with ends of bars shouldered and or riveted, framed guard bars, ladders, framed balusters, walk ways, railings, and similar works con-forming to Fe 290. Gde-E-165, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap outlet dia 75mm with grating including jointing with solvent cement complete all as per specified and directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete including necessary form work all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1: 4 on faces of brick work or concrete surfaces with WPC, finished even and smooth W/O using extra cement as in roof. (WPC shall be measured & paid seperately) .

Supply only integral water proofing compound. (ISI marked) complete all as specified and directed

M&L applying water proofing treatment with the following:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application complete all as specified (c) M&L for preparation of newly sufrace of app membrane and applying two coats of bituminious alumunium paint @ 200 gm per sqm etc complete all as specified and as directed

M & L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrapping or any other means, including filling depressions of scrapped surfaces with putty and remove vegetable/plants roots from Walls/Chajjas and preparation of surfaces for further treatment of any description and applying two coat of cement base paint white or tinted over & including a coat of white cement on prepared surfaces of walls complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying two coats of oil emulsion distemper over two layer of JK/Birla cement putty complete all as specified and as directed

M&L for preparation of new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for painting on old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint including preparation of old surfaces complete all as specified and directed.

Dismantling of plain or corrugated sheeting complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including washers, screw bolts complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer on steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and deposting to MES storeyard complete all as specified and directed.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant los smoke low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :-

One light point controlled by one switch complete all as specified and directed.

One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed.

one fan point controlled by one switch & regulator complete all as specified and directed..

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and directed..

One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per Srl item No.114 above but one bell/buzzer point controlled by one switch -do-

Description all as per item No114 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole two way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F switch bell push button type 5 Amp single pole complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into new conduit with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note :- PVC conduit of size 32 mm dia deemed to be include in quatated rate

M&L for Sheet metal enclosure TPN DBs -DPx -3 ,100 MCCB as incomer SP/TP as out going for DX-3/Lexic MCB till 63 A as out going ,04 Way with safe shroud for Netural links,Compact Busbarassembly, Protect plus for busbars Cat part No 6076 95 , 6 way DPX3 160+18 with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . (Note:- MCBs will be measured separately.) Make:- Legrand Cat Pt No 607695 or equivalent in Hager/Merlin Gerin multi-9

S&F MCCB 80 Amps,415 volts,3 phase,50HZ, having 10 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed. (over load release :Adjustable Thermal release (.7 to 1.0 In ) and Fixed magnetic type Suitable for 10.0 In )

Supply and fixing in replacement of switch disconnector fuse insheet steel enclosure unit kit kat rewireable fuses grip TPN, 415V 50Hz 100 Amp AC with HRC fuses in sheet steel enclosure complete as directed. Make:-Havells /L&T/GE

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series with copper lugs, complete all as specified and as directed.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series with copper lugs,complete all as specified and as directed.

Supply and fixing in repair 18 W LED 5700k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed. Make :- Crompton greaves, or equivelent in philips/bajaj /CG.

S&F in repair 09 W LED lamp fitted including wiring upto and terminating into complete all as specified and directed. Make :- ( LED PRIDE 10W)/Bajaj/CG/ Philips

Supply and fixing light fitting Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser. including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, cat. part. No LHEOAOP7UZ6W010 Make - Havells , C&S, Philips

S&F LED security/ street light fitting 1 X30 W LED 5700K energy saving & environmental freindly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 65 protection and impact resistance of IK 07 luminaire with high power LEDs as light source and electronic driver suitable for pole dia 40 mm including 45 mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Havells Cat No ENDURACITYLITEPLTPLUSSL30WLED757SASYBOPC OR equivalent of Philips/Bajaj.

S&F ceiling fan 1200 mm sweep BEE 5 star rating complete AC single phase 230 volts.including all fixing arrangement like hook, regulator,pipe of suitable size complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 X 4 sq. mm complete all as specified and directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .

Returning fitting in soft/loose soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complete all as specified and directed.

M&L for brick protection covers over cables of Class LV, type 1 flat size 250mm x150 mm x40 mm , laid dry over cables (length of cable cover shall be laid across the length of the cable complete all as specified and directed

M&L pipe galvanised iron, light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge for the size 50 mm dia

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) ccomplete all as specified and directed & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

DEVENDRA ENTERPRISES

M/S Ritu Tandon

M/S M S Constructions

M/s Hansraj Shivhare

M/s JS Constructions