COMPREHENSIVE MAINTENANCE AND REPAIR TO SWIMMING POOL THREE PHASE ONLINE UPS FIRE DETECTION AND FIRE ALARM SYSTEM CLEANING OF SWT AND OHTS INCLUDING CERTAIN WATER SUPPLY AND ELECTRICAL SUPPLY WORKS AT 2003 STATION UNDER GE AF GURGAON

Amount

M&L for Comprehensive Annual Maintenance of swimming pool and Backwash filter system when needed (D.E. included) a qualified service technician shall make 10 trip(s) every month to the location to perform the following service (weather permitting): (a). Clean tile in pool (cleaning suntan oils and organic materials from tile- not mineral deposits). (b). Clean strainer basket (as needed). (c). Vacuuming, leaf mastering or leaf raking of the pool (as needed). (d). Chemical testing of pool and balancing water with chlorine and acid (as needed). (e). Complete water analysis. (f). Skim water surface each visit. (g). Brush pool and walls of pool (as needed). (h). Care and maintenance of the filter equipment. (j). Elimination and control of an algae problem (additional charges required). (k). Refilling of chlorinator bucket and tubing adjustments (additional charge for tubing). (l). Rainy day schedules shall consists only of chemical testing of the water, adding any necessary chemicals and checking the operation of all pool equipment. (m). Drain and refill and cleaning of Main Pool in each job.

M&L for dismantling the electric induction booster motor 3 phase 415 volt 50 HZ, 5 HP capacity and shifting to workshop for rewinding with super enameled copper wire of existing gauge of approved quality including varnishing including replacement of Bearing & bush as per site and refixing at existing for swimming pool including connection, commissioning and testing complete, including transportation complete all as specified and as directed.

M&L for repairing and testing swimming pool of booster motor pump 5 HP of make- pentair and any type including welding work, turning, re-metaling of shaft bush bearing, key and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed.

Supply and fixing uncharged and non cogulant sand media and marble stone aggregate of suitable grade and size for pressure filter of size 1200mm dia made of MS floor mounted at swimming pool- 4 Nos , complete all as specified and as directed.

Labour/service charged for removing old charged & cogulated sand media layer by layer including filter membranes and making new layers of sand, marble stone aggregate and filter membrane both vertical in center of vessel and between each layers sand and stone of suitable thickness and compressing it properly and the testing, commissiong filters as specified and as directed. Note: (a) Rate of filter membrane of any size, type, grading and quantity as per existing is deemed to be included in quoted rate. (b) Rate are deemed to be inclusive of lifting arrangement of vessel like hydra, T&P and labour required at site. (c) Repair of minor defect encounter during overhauling of sand filter media filter is deemed to be included in quoted rate. (d) Acid and other cleaning agent required for cleaning of inner surface of vessel is deemed to included in quoted rate. (e) Rate are deemed to be inclusive of uPVC fittings (any type, size and quantity) required at site for disconnecting and refixing vessels after overhauling. (f) Rate are deemed to inclusive of repair to vessel if any damage caused to vessel and fitting due to mishandling by labour during execution of work.

Supply and installation of multiport valve suitable for uPVC pipe upto 75 mm dia with 6 way water flow, Side mounted on vessel with 360 degree rotating handle (made of high strength plastic), including valve to be properly consealed, tighten and leakage proof, complete all as specified and as directed.

Supply and Fixing Butterfly valve of 90mm dia complete all as specified and as directed. Make: Audco (L&T)

Supply and fixing DOL starter along with auxillary block (Make: L&T cat: MNX A2) suitable for filteration pump of capacity 5HP along with wiring, complete all as specified and as directed.

Supply and Fixing thermal relay of 4-10 Amp range complete all as specified and directed, along with wiring, complete all as specified and as directed.

Supply and fixing single phase preventer suitable for 5HP pumpset along with wiring complete all as specified and as directed.

Supply only for OT solution for chlorine test in 500 ML bottle complete all as specified and as directed. Make-RMCO/ Declibac

Supply only HARDNESS Test solution(3 btls x 500 ml Each ) complete all as specified and as directed. Make: RMCO/ Declibac / E-in-C approved.

Supply only PH test solution BTB or Phenol Red solution for pH test (500ml), complete all as specified and as directed.

Supply and fixing water Pressure gauge of 100mm dia, complete with all accessories, complete all as specified and as directed.

Supply only TCCA-90 ( Try chlorocynuricacid) all as specified and as directed by Engineer-in charge.

Supply only Soda Ash all as specified and as directed by Engineer-in-charge.

Supply only CuSo4 powder (algaecide) type all as specified and as directed by Engineer in charge

Supply only NaH SO4 (Sodium Bi sulphate ) all as specified and as directed by Engineer-in charge.

Supply only Alum Crystal type all as specified and as directed by Engineer -in-charge.

Supply only Altoch GP granuals all as specified and as directed by Engineer -in-charge.

Supply & Fixing under water LED light 18 watt, DC supply type, as per on site and making complete system water proof by selant and rubber washers and necessary wiring work, complete all as specified and as directed. Note: Necessary arrangment like mapower, electrician, T&P, dewatering pump etc is deemed to be included in quoted rate.

Supply and fixing Electronic driver AC to DC converter duly enclosed in sheet enclosure with switch and supply in & out cable connection points including ammeter, voltmeter and indictaion lamp duly fixed in enclosure, used for under water lights (18 Nos) each stabilizer carring load of 6 light and variable light functioning, including transformer of suitable capacity as per existing on site, PCB board, indication lamp, change switch etc are deemed to be included in quoted rate, complete all as specified and as directed.

S&F pool under cleaning brush of superior quality enclosed in stainless steel enclosure of 36 inches in length, having eight wheels and provision for connection with suction sweeper hose and rope tie rings at both end of brush for manual operation with rope to remove coagulated sediments from pool, complete all as specified and as directed.

Supply, install, connect, test and commission factory made cubicle type dust and vermin proof LT Feeder Pillar of suitble size outdoor type for Swimming pool borewell and VIP Borewell, made out of 3.15 mm thick CRCA sheet and 50x50x6 mm (ISA- 5050) MS angle frame with hinged cubicle doors with locking arrangement, duly painted with two coats of synthetic enamel paint over a coat of red-oxide primer with seven tank process with twin shutter closing & locking arrangements complete and fixed in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation 40 cm above ground level. It should be outdoor type and approved through CPRI . LT Feeder Pillar comprising of the following accessories :-

INCOMING : (I) MCCB, AC 415 volts,4- Pole, 200 Amps current rating, 36 KA rupturing capacity with adjustable (70% to 100%) thermal setting and fixed magnetic setting conforming to IS: 13947-II complete with connections to the bus-bars. - 01 No.

(ii) Aluminium Bus-Bar strip used of suitable rated capacity of 300Amps with coloured PVC insulating sleeves, mounted on post insulatore, 1100 volt grade - 04 Nos.

(v) Phase Indicator Lamps, LED type. - 01 Set

(vi) Panel instrument fuses - 01 Set

OUTGOINGS : (i) MCCB 3 pole- 32 Amp duly attached with DOL Starter (including Single phase preventer , Contactor, Thermal overload Relay 13-22 Amps) - 02 Nos suitable for 15 HP submersible pumpset. (ii) MCCB 4 pole 32 Amp - 02 Nos

Testing of Water Samples for Chemical, bacteriological & metal analysis as mentioned below from User end and from the nearest point of OHT tank or as directed by Engineer-in-charge during delivery time for each month complete all as directed.

(b) Specific Conductivity

(c) Free Chloride (CL)

(d) Total Harness as Ca CO₃

(e) Iron as (FE)

(f) Arsenic (AS)

(g) Total dissolved solids

(h) Coliform

(i) E. Coli

(j) Colour

(k) Odour

(l) Taste

(m) Floride

(o) Turbidity

Note :- (a) Sample of Water for the above media test are to collected in transparent sterlized container/Jar/bottle (to be arranged by contractor) separately for each test against each pump houses. (Hygienically clean bottles) and proper sealing must be done by contractor.

(b) Sample of water to be collected before and after treatment shall be forwarded to Govt Lab approved & NABL accredited Lab for testing within spitulated time frame. No Extra payment shall done for transportation charges.

M&L for Dewatering OHT and making surface free from fungi by scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC over head tanks (bottom & wall) by using brushes and bleaching powder and other cleaning materials as required and applying two coats of lime wash inside the surface of the tanks including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY, DATE OF CLEANING AND DUE DATE OF CLEANING" in capital letters of suitable size on outside visible place of OH tank with synthetic enamel white paint over black back ground of 50,000 Gallons water tank complete all as specified and directed. (Note: Main source OHT shall be cleaned 2 time a year)

M&L for Dewatering UG Sump and making surface free from fungi by scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC UG sump tanks (bottom & wall) by using brushes and bleaching powder and other cleaning materials as required and applying two coats of lime wash inside the surface of the tanks including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY, DATE OF CLEANING AND DUE DATE OF CLEANING" in capital letters of suitable size on outside visible place of UG sump tank with synthetic enamel white paint over black back ground of 1,00,000 litre water tank complete all as specified and directed. (Note: Main source UG sump must be cleaned 2 time a year)

M&L for scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of HDPE storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " TANK CAPACITY AND DATE OF CLEANING" in capital letters of suitable size on outside visible place of OH tank with synthetic enamel white paint over black back ground of following capacities complate all as specified and directed by Engineer in charge.

(a) up to 500 Ltrs capacity

(b) 750 Ltrs to 1000 Ltrs capacity

(c) 2000 Ltrs capacity

M&L for Cleaning of static tank of following capacity by providing pumping set & removing all muds, stones, other foreign materials etc washing with bleaching powder and applying a coat of colour washing for (internal and external portion) including repairing and painting of wire mesh and MS angle iron frame and writing the words " TANK CAPACITY AND DATE OF CLEANING" in capital letters of suitable size on outside visible place of Static tank with synthetic enamel white paint over black back ground and covering static tank with polyester green cloth used in arboriculture to prevent falling of wood & leaves from tree in tank complete all as specified and as directed of the following sizes:-

22,000 Ltrs capacity at New MT Section & P-74

24,000 Ltrs capacity at P-10 & FF Ph

35,000 Ltrs capacity at Signal centre

60,000 Ltrs capacity at helipad

S&F in replacement of gun metal gate valve (heavy duty) with iron wheel head screwed both ends for iron pipe of 20 mm dia bore complete all as specified & directed by Engineer - In - Chrage.

All as per Item No 30 above , but 25 mm dia complete.

All as per Item No 30 above , but 40 mm dia complete.

All as per Item No 30 above , but 50 mm dia complete.

S&F jointing and testing of cast iron sluice valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts washers and gaskets including taking down unserviceable sluice valve complete all as specified of size 80mm complete all as specified.

All as per Item No 34 above , but 100 mm dia complete.

All as per Item No 34 above , but 150 mm dia complete.

All as per Item No 34 above , but 250 mm dia complete.

S & F in replacement of Non return valve size 80 mm dia , including rubber fibre board gasket joint at both ends with nuts , bolts & washers including necessary earth work complete all as specified and directed by Engineer-In-Charge.

S & Fin replacement of Non return valve size 100 mm dia , including rubber fibre board gasket joint at both ends with nuts , bolts & washers including necessary earth work complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in replacement of GI Tubing , medium grade , 20 mm dia bore complete all as specified & directed by Engineer - In - Chrage.

All as per Item No 44 above , but 25 mm dia complete.

All as per Item No 44 above , but 40 mm dia complete.

All as per Item No 44 above , but 50 mm dia complete.

M&L for construction of Valve pit chamber 90 cmx90cm (inner dimension) and 90 cm deep , from the top of MS cover fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in anu type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed by Engineer - In - Charge. Note: Exacavation, returning, refilling etc is deemed to be included in quoted rate.

M&L for Cast iron pipes with spigot and socket ends centrifugally cast in any length, laid in trenches of 100mm bore complete all as specified.

M&L for Cast iron pipes with spigot and socket ends centrifugally cast in any length, laid in trenches of 150mm bore complete all as specified.

S&F Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipe complete all as specified and directed.

M&L for Run Lead joint for spigot and socketed pipes and fittings of 100 dia bore. Complete all as specified and directed.

M&L for Run Lead joint for spigot and socketed pipes and fittings of 150 dia bore. Complete all as specified and directed.

M&L for Repairing of Sluice valve (flange joints & checknuts) and ferrule leakage on site in 80mm to 250mm dia pipe by suitable gasket, nut, bolts, washer etc complete all as directed by Engineer in charge.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and fixing Microprocessor based 10 Level indiactor with magnetic sensor and high level alarm with alarm reset system complete all as specified. Note: System shall be water proof.

S&F PVC insulated copper wire of 1.5 Sqmm, 2 core from tank to panel, complete all as specified and directed.

S&F PVC flexible pipe of 20mm for wire protection from tank to panel, complete all as specified and directed.

M&L for Cutting cast iron pipes and reducing to required length before laying for 100mm dia bore pipe, complete all as specified and directed.

All as above item No 57 above, but for 150mm dia pipe.

All as above item No 57 above, but for 250mm dia pipe.

M&L for Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 100mm dia bore pipe complete all as specified and directed.

All as above item No 60 above, but for 150mm dia pipe.

All as above item No 60 above, but for 250mm dia pipe.

M&L for Cement concrete in foundations, filling and mass concrete of type D2 1:4:8 (40mm graded aggregate), complete all as specified and directed.

Demolition drain made of Brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 of cement mortar, complete all as specified and directed.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and directed.

M&L for taking out and lowering down submersible pumpset of capacity 15HP along with GI column pipe of 80mm bore (60 meters) in borewell complete all as specified and directed.

Supply and fixing rubber gasket sheet suitable for 80mm bore GI column pipe complete all as specified and directed.

Supply and fixing medium grade GI column pipe of 80mm bore complete all as specified and directed.

S&F MS flange 12mm thick of internal bore of 80mm and outer dia of 135mm complete all as specified and directed.

M&L for welding MS flange on column pipe including making bore for nut bolts and groove cutting in flange for submersible cable run through grooves complete all as specified and directed.

Supply and fixing of nuts, bolts and washers complete all as specified and directed.

M&L for Development of bore well for improving the yield of bore well and to achieve sand free crystal clear water by means of air compressor not less than 630 CFM capacity by lowering 32 mm dia pipe up to the depth of not less than 260 feet . Development should be continuing by applying air jerk at required intervals. It also includes pouring of chemical to dissolve the compact rust, sand and other sediments. After development and achieving required result pipe and connected items shall be taken out from the bore well and removed sand shall be removed from the pump house building in all respect complete all as specified and as directed.

M & L for Fully Automatic Star delta Starter In sheet Enclosure Type MU-2F Motor rating AC-3,Duty 415V, 50 Hz 3 Phase to 15 HP Motor, Relay range of 09-14 A including Ammeter and voltmeter inslalled on his box as per existing after taking out old U/S complete all as specified and directed.

Labour only for lifting /taking out the non clogging sewage submersible pump set and motor of capacity upto 5 HP including column pipe of any bore by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sewage equalizer tank of depth up to 7 meter and lowering back the pump after repairing /removing the sludge from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut ,Bolts,washers/packing to the existing header without any leakage complete all as directed. Note for :- Rate are deemed to be inclusive for jointing of Submersible Cable upto 7mtr, Steel wire of suitable gauge tied with motor before lowering down upto the depth of motor, reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete all as specified.

Labour only for lifting /taking out the Fresh water submersible pump set and motor of capacity 10 to 15 HP including CI column pipe of any bore by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from bore of depth upto 60 meter and lowering back the pump after repairing /Checking loose connection including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut ,Bolts,washers/packing to the existing header without any leakage complete all as directed. Note for :- Rate are deemed to be inclusive for jointing of Submersible Cable upto 6mtr, Steel wire of suitable gauge tied with motor before lowering down upto the depth of motor, reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete all as specified.

M&L for rewinding of electric motor 5HP , 50 HZ 400/415 volts of non clogging elctric motor of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed .

M&L for rewinding of non clogging sewage Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire including replacement of thrust plate , thrust block housing , bush, sleeves. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 07 Meter, Capacity of motor 5 HP complete all as specified and as directed .

M&L for rewinding of fresh water Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire, including replacement of thrust plate , thrust block housing , bush, sleeves. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 07 Meter, Capacity of motor 10 HP to 15 HP complete all as specified and as directed .

M&L for repairing and testing of pump centrifugal/mono block/non clogging upto 5 HP of any make and type including welding work, turning, re-metaling of shaft bush bearing, key and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed .

M&L for repairing of pump, bucket type for submersible pumpset suitable for 10HP to 15HP of 13 stages including servicing/repair/replacement of each bucket, sleeves, brass impeller, Thrust plate, bush - bearing of suitable size, glands, rotor rod etc. complete all as specified and directed.

Service/Repair for the automation water supply system installed at Master Monitoring panel via 1 No micro processor based Remote Terminal Unit Panel for 2 nos. of Level Sensor , 3 Nos Motor Actuated Butter fly Valve, installed at Mohammadpur OHT. The Scope of work includes carrying out complete repairs as required of all the sub systems viz. RTU(REMOTE TERMINAL UNIT) based Master Monitoring and audio generator (with all the accessories), motorised valves, Level sensors, Level SwitcheS, Remote communication panels, GSM Modem,personal computer, UPS, SCADA software for Automation system and generate backup of SCADA Database - 01 No replacement of unserviceable parts, refixing of old serviceable parts/new parts if any and preparing the records/register complete for the following places complete all as specified and directed. Note: Rates for the required spares are extra as specified below. OEM :- M/S CIMON SOFTWARE(INDIA) PVT LTD (1) Tools and Machinery for : (a) SCADA Automation of OHT level monitoring

Annual comprehensive Maintenance Monthly Service Visit during fault/failure of any product or services for the automation water supply system installed at Master Monitoring & operating master panel via 1 No micro processor based Remote Terminal Unit Panel for 2 nos Nos level sensor , 3 Nos Motor actuated Motorise Valve panel installed at Mohammadpur OHT. The Scope of work includes carrying out complete monitoring as required of all the sub systems viz. RTU(REMOTE TERMINAL UNIT) based Master Monitoring and Audio Generator, motorised valves, Level sensors, personal computer, UPS, SCADA software for Automation system and generate backup of SCADA Database - 01 No replacement of unserviceable parts, refixing of old serviceable parts/new parts if any and preparing the records/register complete for the following places complete all as specified and directed. OEM :- M/S CIMON SOFTWARE(INDIA) PVT LTD (1) Tools and Machinery for : (a) SCADA Automation of OHT level monitoring

Supply of Internet Security anti virus software with one user license for one year complete all as specified and as directed . Make :MacAfee / NPAV / QUICK HEAL

Supply of Ultra sonic Level Transmitter for level monitoring for Overhead Tank with Following specification: - 12 to 24 DC operatinted output 4-20 mA. Range 0-5 mtrs complete all as specified and as directed . Make:- SIEMENS/Banner/Militronics/B&H/Punetectrol

Supply of Butterfly Valves of 150 mm line size along with Motorized actuator complete all as specified and as directed . Make: Belimo/SD TORK/ MARSH

Supply of Actuator for 150 mm line size Butterfly valve and actuor can be direct mount/extended shaft mounting type with 2 nos. torque limit and 2 nos. open/close limit switches as per site complete all as specified and as directed . Make: Belimo/SD TORK/ MARSH

Supply of Actuator for 250 mm line size Butterfly valve and actuor can be direct mount/extended shaft mounting type with 2 nos. torque limit and 2 nos. open/close limit switches as per site complete all as specified and as directed . Make: Belimo/SD TORK/ MARSH

Supply of ARM7 based CPU Card with RS-485, USB, Ethernet, 2 Nos. RS-232 Port, SD card Socket, Real Time Clock of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon

Supply of Analog and digital Input Output interface Unit of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon

Supply of 16 Digital Input, 8 Analog Input Module of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon

Supply of 16 Digital Output Module of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon

Supply of 24 V DC SMPS/ 5/12 VDC SMPS 2 AMP of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon / meanwell

Supply of 5/12 VDC SMPS with battery Charging and cut-off Module of Model iRTU 6000 complete all as specified and as directed . Make : Cimcon / meanwell

Suppply of Wireless modem suitable for GSM based communication system to be mounted in RTU OR at Master Control Station complete all as specified and as directed .

S&F Nos. of GSM SIM card charges including Rental/ SMS charges for the period of 1 years complete all as specified and as directed .

Supply of External High Gain antenna Unit along with extension Patch cord complete all as specified and as directed.

Supply of Relay - 2 C/O, 240 V AC/ 24 VDC for Master and Slave Panel complete all as specified and as directed . Make : IDEC/PLA

Supply of suitable rating of MCB complete all as specified and as directed . Make : Siemens/havelles/L&T

Supply of Indication Lamp 230 VAC operated for panel complete all as specified and as directed . Make: Esbee/schenider

M/S PARKASH ENTERPRISES

M/S RK Builders

akhil enterprises

D P ENTERPRISES