NIT NO. 78/Durg(Balod)/2026

N.I.T.SCHEDULE FOR RENOVATION WORK FOR JANSUVIDHA KENDRA/LOKSEWA KENDRA IN BALOD DIST BALOD C.G.

Building SOR 01.01.2015 upto date ammendment P.A.C. Amt. 23.16 Lacs

S.No. Department SOR YEAR Item No. Particular Qty. Unit Rate Amoumt

1 PWD Building 2015 16.8 Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 818.50 Sqm 57.00 46655.00

2 PWD Building 2015 16.18 Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the materials with 50 m lead. 66.24 Sqm 16.50 1093.00

3 PWD Building 2015 16.26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 15.00 Each 100.00 1500.00

4 PWD Building 2015 16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 15.00 Each 46.50 698.00

5 PWD Building 2015 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 23.19 Cum 549.00 12731.00

6 PWD Building 2015 16.27 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 8.00 Each 66.50 532.00

7 PWD Building 2015 16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 45.00 Each 33.50 1508.00

8 PWD Building 2015 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1440.44 Sqm 11.00 15845.00

9 PWD Building 2015 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 40.62 Cum 3817.00 155047.00

10 PWD Building 2015 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 1617.60 kg 75 121320.00

11 PWD Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer.. 670.50 KG 67.5 45259.00

12 PWD Building 2015 3.1 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.

PWD Building 2015 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 2.95 cum 2970.00 8762.00

13 PWD Building 2015 12.79.1 Ammendment 12.79 Providing and laying Double / Multi Charge (minimum 2.0mm thick layer) vitrified floor tiles with water absorption less than 0.5% and conforming to IS : 15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 12.79.1 Size 600x600mm thickness 9 to 10 mm 941.28 sqm 1082 1018465.00

14 PWD Building 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

PWD Building 2015 18.76.3 150 mm dia pipe. 20.00 mtr 267.00 5340.00

15 PWD Building 2015 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

PWD Building 2015 18.1.3 White Orissa pattern W.C. pan of size 580x440 mm 4.00 No 2899.00 11596.00

16 PWD Building 2015 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

PWD Building 2015 18.17.2 White Size 550x400 mm 4.00 No 1408.00 5632.00

17 PWD Building 2015 Amd. 12.74 Providing and Fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS : 15622-2017 of approved make in all colour, shade over 20 mm thick bed of Cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with gray cement slurry @ 3.3 Kg. / Sqm. including pointing in white cement mixed with matching pigment complete.

PWD Building 2015 12.74.1 Size 300x300mm thickness 7 to 8 mm 29.50 sqm 779.00 22981.00

18 PWD Building 2015 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

PWD Building 2015 12.7.2 Size above 200x300mm 91.56 Sqm 646.00 59148.00

19 PWD Building 2015 14.71 Providing and applying satin/matt finish Enamel paint coats in all surface applying @0.75 lit/10 Sqm up to required finish as per relevent LS. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 343.44 Sqm 133.00 45678.00

20 PWD Building 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 66.24 sqm 636.00 42129.00

21 PWD Building 2015 9.3.2 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 9.3.2 Electric resistance or induction butt welded tubes Grade-300 262.40 kg 93.50 24534.00

22 PWD Building 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 221.40 Sqm 658.00 145681.00

23 PWD Building 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250kg/sq.cm 12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 650.00 Sqm 632.00 410800.00

24 PWD Building 2015 17.13.1 Renewing glass panes, with wooden fillets wherever necessary: 17.13.1 Float glass panes of thickness 4 mm 143.10 Sqm 669.00 95734.00

25 PWD Building 2015 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 8.12.2 35 mm. thick (single leaf) 8.40 Sqm 2005.00 16842.00

Total Rs. 2315510.00

Say Rs. In Lacs 23.16 23.17 0.01

Sub Engineer Sub Divisional Officer P.W.D.Sub Division No. 1 Balod Executive Engineer P.W.D.Balod Division Balod