Construction for Covering of Balconies with UPVC Glazzing in Type-III Building ( Block- III and IV) Set No. 1 to 9 on Forest Colony Mist Chamber Khalini Shimla

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge

Dismantling steel work in built up sections in angles, trees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead In R.S. Joists, channels angles, tees 100x100x6

15 mm cement plaster on rough side of single or half brick wall of mix

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60+- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (Shape & Size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,stainless steel (SS 304 grade)friction hinges, zinc alloy (White powder coated) casement handles, G.I fasterners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame &sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing &direction of Engineer-in-Charge. (Single/doble glass panes and silicon sealant shall be paid separately)

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape &size according to uPVC profile ), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather prrof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge. (Single/double glass panes, wire mesh and silicon sealent shall be paid separately)

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately)

Providing and fixing steel (white powder coated ) crescent lock for uPVC sliding window/door with necessary screws etc complete

BHUSHAN THAKUR (BID ID -464794)

suresh kumar (BID ID -464208)

Mitter Dev Sharma (BID ID -465940)

Rohitashav Singh Mehta (BID ID -466084)

Reet Singh (BID ID -465997)