REPAIRS TO PLUMBING WORKS, FLOORING, TILING, SANITARY FITTING, JOINERY, ROOFING, FALSE CEILING AND MISC WORKS AT UNIT 729 AND 289 UNDER AGE B/R (S) NO II GE SOUTH SECUNDERABAD

Amount

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube ,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a).

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or weldedall as directed by Engineer-in-Charge

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded all as directed by Engineer-in-Charge.

S & F steel window or ventilator fixed type glazed bar all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples fixed in repairs.

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design all as directed of Fe 290 Grade E-165.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.

M&L Preparing old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.

S&F 300mm long aluminium sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts four on bolt plate and two on stapple plate etc., complete.

S&F 200mm long aluminium barrel tower bolt barrel tower bolts of extruded section and fixed

S&F 100mm long MS butt hinges, medium weight cold rolled.

S&F 100mm long SS butt hinges, medium weight cold rolled.

S&F 150mm long aluminium handles cast type anodised

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete.

S & F aluminium powder coated frame for doors, windows, ventilators with suitable sections all as directed by Engineer-in-Charge and as per manufacturer’s instructions.

S & F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated aluminium window and ventilator shutter ,side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stays 150 mm long (1 no),hinges typeB-21 100mm long (2 nos) suitable handle (1no) complete all as specified.

S&F aluminium (die cast) body door closer, hydraulically regulated, designation No 03 universal type (ISI marked) suitable for door shutters of 851 to 1000 mm in width and weight between 36 to 60 Kgs fixed in repairs to existing wooden/MS/Aluminium door frames all as directed.

S&F in repairs of 150mm length Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

S&F pre-laminated particle board (12mm thick) Interior grade pre-laminated both side with decorative choice laminations fixed in alluminium door or frame work with screws or necessary fittings complete etc.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc all as directed by Engineer-in- charge.

S & F four levers mild steel mortice lock vertical type size 100mm fixed in repairs.

Dismantling of asbestos cement / Plain or corrugated steel sheeting in roof covering.

S&F 6mm thick corrugates sheets in roof fixed with 'J' type or cranked bolts (used to fix Non Asbestos) all as specified as directed by Engineer-in-Charge

S&F 6mm thick asbestos cement two piece serrated ridge for corrugated sheets fixed with 'L' type or 'J' type or cranked hook bolt.

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and directed.

Refixing of existing structural steel as per the site requirement all as directed by Engineer-in- charge.

M & L roof trusses (framed) trussed purlins, rails and fastenings and heavy bracket framing (beams, tees, angle, channel or flat section) including distance pieces, cleats etc Gde confirming to Fe-410 W.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip.complete all as sepcified and directed by Engr-In-Charge.

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed by Engr-In-Charge.

Supply only integral water proofing compound.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washingg down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete as directed by Engr-in-charge.

M&L for PCC 1:2:4 type B0 using 12.50mm graded aggregate as in padding (level course) on roof surface averaging 25mm thick etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) on primed surface by forced application finished with bitumen base aluminium paint @ 0.20 Kg/Sqm on top complete all as specified.

Demolation of Brick or stone masonry built in cement mortar.

M/L brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and directed incl scaffolding if necessary. Note : Patch work upto height 7.50m incl necessary scaffolding.

M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair . complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M & L Preparation of newly plastered surfaces of wall and applying two coat of Distemper over a coat of primer complete all as specified & directed.

M & L Preparation of newly plastered surfaces of wall and applying three coat of Whitewash complete all as specified & directed.

M & L Preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified & directed.

M&L for applying three coats of white wash on ceiling over primer including preparation of new plastered ceiling surfaces complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl renderering 10mm thick for laying floor finishes in CM 1:4.mm

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 50 mm thick compacted sand cushion Complete all as directed by Engineer-in-charge Make :- Ultra or Classic.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore in repairs.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

S&F 15mm bore Bib taps, Chromium plated castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed

S&F in repair pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe

S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter,Water tank stagingswindtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as directed.

Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L PCC 1:4:8, type D2 using 40mm gd stone aggs as posts (including caps and bases) complete all as specified and directed

S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP piller taps

S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe and fixded.

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms).

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed.'

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag) all as directed by Engr-in-charge.

S & F in repair Towel bar cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F450024)

S & F in repair Urinal Complete set incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 96008)

S & F in repair Wall Mixture cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F320011)

S & F in repair Towel ring icromium platedncl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F890004)

S & F in repair Paper Holder with cover cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F840009)

S & F in repair Single lever Basin Mixer w/o Popup Waste cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F400009)

S & F in repair Bip cock with wall flange cromium platedincl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F400002)

G SATISH REDDY AND CO

VACON INFRASTRUCTURES

S.R.M.K Enterprises

harshraj and co

M/S P.SWAROOP KUMAR

BEEGEE DESIGN SYSTEMS

PARDEEP AND CO

SAI RUPA CONSTRUCTIONS

RAM CHARAN CONSTRUCTIONS

abhilasha constructions

M/s Bhavani Constructions