Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance VILLAGE GOBINDAPUR POST SONHA DISTRICT BASTI | BASTI | UTTAR PRADESH | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.7 L
EMD Value
₹3,000
Closing Date
7 Jul 2020, 12:00 pmClosed
SE, EUDC-8
SE, EUDC-8, Lesa, 1st Floor, 33/11 KV Ghantaghar,Chowk, Lucknow
For Construction of New 250 KVA 11/0.4 KV Sub Station near 11 KV Feeder Tudiyaganj and related work in the area of EUDD Chowk LESA (Cis-Gomti) Lucknow.
2020_MVVNL_484227_1
16/EUDC-8/LESA/2020-21
Open Tender
Electrical Works
Fixed-rate
180 days
EUDD Chowk LESA (Cis-Gomti) Lucknow.
As per Tender Document
2 documents required · 2 mandatory
₹1,180
EE EUDD-Residency, Lesa
₹3,000
29 Jul 2020
16 Jun 2020
7 Jul 2020
16 Jun 2020
7 Jul 2020
16 Jun 2020
Amount
Safe loading at ESC Daliganj, carriage upto JE dump store/site of work, its unloading and proper stacking of following materials
a) 11/0.4 kV 250 KVA Transformer.
b) STP 11 Mtr Long
c) 11 Kv 3x70 mm² XLPE Cable
d)LTPVC Cable 3.5x240 Sqmm
e)LTPVC Cable 1x240 Sqmm
f) Stat wire 7/10 SWG
g) 11 Kv GI pin & pin insulator
h) Danger Board with Clamp
i) M.S. Top Channel 125x65x2240 mm
j) M.S. Top Channel 100x50x2028 mm
Laying of 11 Kv 3x70 mm² XLPE Cable laid by digging of trench of size 900 mm deep 500 mm wide after spreading of local sand 3" on the surface of trench in between two nos consecutive rows of first class bricks and covered with brick filling of sand in hollow space and filling of trench with mud and its proper ramming ( All the materials except cable will be arranged by the contractor)
Fabrication, erection, grouting, plinthing and painting of Sub Station type double pole structure on 11 Mtr STP pole providing top of channel MS 100x50x2240mm, MS dropper channel 100x50x2000 mm concerting of support, number plate, danger board with clamp, Al type, stone pad 300x300 x 75 mm, clamp with nuts and bolts (Only STP Will be arranged by the department)
Hosting of 11 KV 3x70 mm², XLPE cable with pole, proper clamping and jumphering. The cable will be passed through MS pipe of size 150 mm dia3 Mtr long( All the materials and T&P arranged by the contractor)
High pressure testing of 11 KV 3x70 mm² XLPE cable with DC voltage at 18 KV with hold up to 5 minutes ( All the material will be provided by contractor)
Boring type earthing of 11/0.4 Kv 250 KVA Substation by boring and lowering of 20 M deep or up to water lavel 1.5" dia B Class jindal make GI pipe its connection in between T/F Body and Neutral with GI strip of size 50x6 mm ( All the materials will be arranged by the Contractor)
Construction of Masonry type Transformer plinth of size 2x2x1.5 M with brick, cement coarse sand, sand &brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4" thickness grouting of 2 no MS channel of size 100x50x2000mm on the top of the plinth for placement of T/F. ( All the materials will be arranged by the contractor)
Construction of retaining wall, fabrication erection of wire mesh fencing of size 5+3 & 2.0 M height around T/F and distribution pillar Box with retaining wall & 1 no gate with locking arrangement made of MS angles iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6mm. Wire Mesh of size10 SWG rectangle type its painting as per norms of RESSPO. ( All the materials will be arranged by the contractor )
Installing, commissioning of 250 Kva Transformer including its connection in between 11 Kv line and LT line mounting of copper L-Piece 300x65x6 mm providing Al crimping lugs of size 250 mm²( All the materials except T/f will be arranged by the contractor)
Construction of masonry type Distribution pillar Box with first class bricks ballast cement, coarse sand, brick ballast and MS round bar of 10 mm dia including supply and mounting of 02 no straight MS angle 50x50x6x750 mm. 01 No Henley type talless fuse units 500 amp 650 Volts one no for incoming and other for outgoing. Copper bus bar 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet ( All the materials will be arranged by the contractor)
Fabrication, erection and grouting of cable stand with MS angle of size 65x65x6 mm upto the height of 3 M from the ground level with two no support MS angle of same size ( All the material will be arranged by the contractor)
Laying of LT PVC cable size 3.5x240/1x240 Sqmm laid by digging of trench of size 900 mm deep 500 mm wide after spreading of local sand 3" on the surface of trench in between two no consecutive rows of first class bricks and covered with bricks filling of sand in hollow space ( All the materials will be arranged by the contractor)
M/S BALA JI ENTERPRISES
M/s SAMAN ENTERPRISES
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .