Establishment of EVHPR D Training facilities for ETHNO at Veterinary College and Research Institute,Orathanadu.

Amount

Civil Works

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. Narrow Excavation

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of well gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Brick work in cement Mortar 1:5 (One cement and five sand / M.sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and basement including curing, etc., complete complying with standard specifiction. For foundation and basement

For superstructure in Ground floor

For superstructure in First floor

For superstructure in Second floor

Providing brick partition wall 11.50 cm thick using best quality second class chamber burnt bricks of size 9” X 4 ½” X 3” in cement mortar 1:3 (One cement and three sand) including supply and fixing hoop iron reinforcement if considered necessary by the departmental officers and as directed etc., complete complying with standard specifications. (The hoop reinforcement will be measured and paid separately). For foundation and basement

For superstructure in Ground floor

For superstructure in First floor

Brick work in Cement Mortar 1:3 (One cement and three sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and basement including curing, etc., complete complying with standard specifiction. For foundation and basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For circular columns

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers For foundation and basement

For super Structure Ground floor

For super Structure First floor

Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 20mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:11/2:3 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

White washing three coats using freshly burnt shell lime white in colour. Fevicol type gum should be used in the preparation of white wash solution, adequate quality of approved blue powder to be added to white wash solution for application to the walls etc., complete complying with standard specification.

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)(The basic cost of the tiles should not be less than Rs.80/- per sq.ft.)

Flooring with anti-skid ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following Eurocon or equivalent tiles of size 300 x 300 x 20 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing the walls with colour Glazed tiles of 30cm x 45cm, set in cement mortar 1:2 (One cement and two sand) with a base plastering of cement mortar 1:3 (One cement and three sand) of 12mm thick and pointed with colour cement at 0.40 kg/cm2 etc., complete complying with standard specifications and as directed by the Engineer,i/c.,

Supplying and fixing MS iron grill for windows ventilators and grill gate etc., including one coat of red oxide primer using MS angle of size 40X40X6mm grill using 20X6mm MS flat and necessary hold fast with MS angle 40X40X6mm 23cm length splashed at end is to be provided at appropriate places for fixing the grill etc., complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.

Supply and fixing country wood scantling (first quality wood) for frames of doors, windows, ventilators including labour charges for making, applying anti corrosive paint on the back sides of frame and fixing the frame in position, etc. complete complying with standard specification. (The wood have to be got approved by departmental Engineers before use on work).

Supplying and fixing flush door shutters of 32mm thick single leaf with skin type paneled door made up of hard wood of approved quality including fixing necessary furniture fittings such as iron oxide MS hinges of 125mm x 30mm size 3 Nos., aluminium aldrop of size 250 x 16mm – 1 No. aluminium tower of size 250 x 12mm – 1 No. Aluminium tower bolt of size 200x12mm – 1 No., D type aluminium handle of size 125mm – 2 Nos. Aluminium door stopper / magnet catch 3” depth – 1 No. respectively, etc. complete complying with standard specification.

Supply and finishing in position of Solid PVC door shutters using 19 gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The overall size of styles shall be 50mm X 30mm. The overall size of top rail, local rail and bottom rail shall be 75mm X 30mm. The overall size of frames shall be 50mm X 45mm with suitable rebate for housing the shutter. a. Solid panel PVC door with frame

Manufacturing supplying and fixing of STEEL DOOR with following section. Outer frame 40 X 40 X 3mm Hollow steel special extruded section as at 3.28Kg/RM and shutter frame 40 X 40 X 3mm hollow steel special extruded section as at 3.28Kg/RM. Stiffeners with 32 X 6mm at 1.5 Kg/m MS flat is provided as the lock rail of the door and welded in fact on both ends to shutter frame. 18 gauge CR sheets of best quality is laid as panel is laid as panel in the shutters frames. 18X5mm at 0.7 Kg/m MS flat is welded over the 32X6mm at 1.50 Kg/m MS that on the rear side of the sand witching the CR sheet for rigidly. Additional stiffness with 18 X 5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter 2 Nos., of hinges in case of single leaf and 4 Nos., of hinges in case of double leaf shutter is provided 6 Nos., of hold lasts 120mm length spliced at the ends are welded to the outer frames of the door. Tower bolt 2 Nos., one at top and the other at bottom are provided. One aldrop is provided in case of double leaf door at lock rail section in the door. For single leaf doors one more aldrop is provided in the inner side of the door and additional provision for locking arrangements for lock is provided on the near side of the door at in appropriate place, in case of a double leaf door, MS flat 32 X 3mm at 1.10 Kg/m is provided on the edge of one shutter, to conceal the gap between the shutters. A tic bat is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given a shop coat of red oxide primer etc., as directed by the departmental officers. The rate is include cost of all materials, labour charges, transportation, taxes and all other incidental charges etc., complete.

Supplying and fabricating and fixing in position of colour anodized aluminium matt finished two track sliding window in all floors with sliding and gutter arrangements so as to draw the water entering and made with extruded aluminiium section of required sizes as per IS Standard with necessary accessories such as rubber beedings with best quality rubber, lock, handle and supplying and fixing 4mm thick plain / frosted glass including the cost of all materials, labour, power consumption required for the fabrication, drilling holes in RCC columns, floor, masonry wall wherever necessary with power drills to the required extent and making good to the original condition after fixing. All aluminium sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS1868 / 1962 for an average anodic film thickness with required microns, etc. complete. Outer frame:24 x 33 x 3mm @ 0.546 Kg./m., Centre Mullions : 59 x 33 x 2.50mm @ 0.99Kg./m., Shutter frame : 24x33 x 3mm @ 0.546Kg./m., Aluminium clips : 17.27 x 17.15 x1.40mm @ 0.175 Kg./m. a) Two Track sliding window

Providing aluminium louvered ventilator with new one of aluminium anodized natural colour matt finish louvered ventilator. The outer frame will be 63.50 X 38.10mm X 1.41mm @ 0.818 Kg/m and the louvers with moving arrangements will be made with aluminium channel of sizes 60 X 30 X 4mm @ 1.27 Kg/m with necessary glass panes for louvers 4mm thick aluminium “L” angles, screws, nails conveyances, scaffolding if any and power consumption charges required for fabrication wherever necessary with power drill to extent required and made good to the original condition after fixing etc. complete. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868 / 1962 of anodic film thickness for all sections. All the materials should be got approved by the Engineer,i/c., before fixing in position as directed.

Painting two coats of exterior emulsion paint with fully putty two or more coat with one coat of primer using best quality and approved colour of paint including cost of brushes, scaffolding charges etc. complete complying with standard specification. Paint, primer and colour have to be gotapproved by department Engineers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Providing, fixing, testing and commissioning of white vitreous china floor mounting / wall mounted type European water closet with C.P. bolts, nuts, C.I. chair (painted with two coats of enamel paint over a coat of primer) or other hanging arrangements, close-coupled low volume compatiable cistern with C.P. bolts, nuts, supporting arrangements, bakelite / poly propylene seat & cover with C.P. hinges, pan connector & rubber buffers, complete with all accessories. Including cutting & making good the walls & floors wherever required. (Rate including dual flow ceramic cistern with leveller and Seat covers of matching design)

Supplying and Fixing in position of CP Shower Rose and arm with stopcock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc. complete complying with standard specification and as directed by the departmental Engineers. (The shower rose and arm should be got approved by the Engineer,i/c., before use on work)

Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position of PVC Sintex water tank of 2000 Litres capacity approved quality and make including the cost of PVC adopter, lifting charges, conveyance, etc., complete.

Supplying and fixing of 15mm CP two way tap of required size in correct position etc., complete with standard specifications and as directed by the Engineer,i/c.,

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supply and fixing of 1/2" dia stainless steel health faucet of good quality and approved make etc., complete and as directed by the Engineer,i/c., (The health faucet should be got approved by the departmental officer before use on works).

Supply, laying and jointing CPVC pipe of approved quality and make of the following the fixed on walls with necessary clamps and screws including cutting and threading wherever necessary etc., complete complying with standard specification and as directed by Engineer-in-charge (Below Ground Level) 20mm dia CPVC pipe with ISI mark

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 25mm dia PVC pipe - 15 Kg /CM2 with ISI mark

40mm dia PVC pipe - 10 Kg /CM2 with ISI mark

50mm dia PVC pipe - 10 Kg /CM2 with ISI mark

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements 20 x 12mm PVC Brass Elbow with ISI mark

20 x 12mm PVC Brass Tee with ISI mark

20mm PVC Brass Elbow with ISI mark

50mm PVC Bend with ISI mark

25mm PVC Bend with ISI mark

25mm dia PVC coupling with ISI mark

Supplying and fixing of Black granite slab of 20mm thick for work bench of approved quality with base plastering in cement mortar 1:2 (One cement and two sand) 20mm thick and pointing the slab with coloured cement to match the colour of the slab, finishing neatly, cleaning the surface neatly etc., and shaping front edge of slab half round etc., as directed by the departmental Engineers.

Supplying and fixing cast iron cover of size 60cm X 60cm with suitable frame not less than 30 Kg. by weight to be fixed in correct position and alignment as directed by the Engineer,i/c., etc., complete complying with standard specification.

Plain Cement Concrete 1:2:4 (One Cement, two sand and four aggregate) using 20 mm size hard broken granite stone jelly for vertical angle posts including laying of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and filling the following size of Brick jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc., complete complying with standard specification. 40mm size

20mm size

Supplying and fixing in position best Indian make PVC soil waste pipes of approved make and quality with working pressure given of the following diameter and providing leak proof joints with PVC adhesive resin etc., including fixing to the walls wherever necessary with teak wood plugs, mild steel clamps, brass screws etc., and giving connection to the sanitary fittings including dismantling masonry (or) RCC works (or) flooring wherever found necessary and making good the dismantled portion to the original condition and the pipes shall be fixed in position true to alignment complying with standard specification and as directed by the departmental officers. 75 mm dia PVC pipe – 6 Kg/CM2 with ISI mark

110mm dia PVC pipe – 6 Kg/CM2 with ISI mark

Supplying and fixing of M.S. pipe of various sizes enbedding with cement concrete 1:2:4 to a depth of 0.50 and leaving 1.50m above the ground including providing necessary for lening applying a coat of primer ect. complete.

Supplying and fixing of 0.47mm thick Galvalum sheet of approved quality including the cost of 'J' or 'U' bolt or rivets as the case may be etc, complete.

Supplying and fixing in position best approved ISI quality PVC Rain water down fall pipes of 110mm dia meter having working pressure of 6Kg/Cm2 including cost of PVC pipe, with necessary shoes, bends, nails, teakwood plugs, screws etc., and fixing of cost iron gratings of required dia meter and special clamps at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable cost iron gratings. The size of teakwood plugs to be used shall be 150mm X 25mm in front and 200mm X 75mm in rear and all other sides to a depth of 100mm. The PVC pipe shall be fixed with teak wood plugs by means of "U" clamps using brass screws. Special types of "U" clamp at the centre of the pipeline shall be fixed in addition to those for more than 3 meter pipe length complying with standard specifications.

P.Haridass

Bidder Name

P.Haridass

sri sakthi construction