Erode Dt Lakkampatti tp NNT scheme

Amount

Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNDSS No.23 & 24, V, VI (S2), VII, 9,10 For Compound wall

For Kerb wall & Grade beam

Plain Cement Concrete of mix 1 : 4 : 8 (One part Cement, four part sand & eight part of aggregates) using 40mm gauge hard broken metal from approved quarry including all cost, conveyance of materials to site with proper mixing, compacting, finishing and curing etc., complete as per standard specification. TNDSS No: 28 V, VI (S2) V,VI (S5A) VII

Supplying and errecting centering for Sides and Soffits including necessary supports and strutting upto3.29mt height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90mm x60mm and 10BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia supported at not more than 75cm centre to centre etc complete Complying with standard Specification without Strutting.TNDSS No 30(S) 86 86 A V, VI(S3)VII A) Below GL

For Column

Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. TNDSS NO: 30

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc.,complete as per standard specifications

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part M-sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site and labour charges for mixing, laying and curing etc., complete as per standard specifications. TNDSS NO: 28 & VI (S2) VI (S5A) VII

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 150 mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply of Excel Double see saw with metal seat is provided with 7ft long 1 ½” “B” Class GI pipe 2nos having two Metal seats each With back Metal support and front handles. Each see saw is equipped with ball bearings at the centre for smooth up and down Movements.5ft long 2” centre GI “B” class pipe is closed by 3 Way High Grade Cast Iron Elbow. on both sides to accommodate 1 ½” GI “B” Class support pipes.Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges.ISO & NSIC Certified company.

Supply of Excel Slide FRP - 6FT is provided with FRP slide having the chute length of nearly 12Ft and the centre support pipes height above the ground level is 6Ft. 25mm, 38mm & 32mm G.I “B” class pipes are used.Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating(for outdoor) in attractive colours and no sharp edges.ISO & NSIC Certified company.

Supply of Excel Double swing is provided with 4no’s of 1 ½” GI support ‘B’ class pipes having the height above the ground level is 8 feet and they are connected with a top GI 2” ”B” class pipe length of 10 feet with 3way High Grade Cast Iron Elbow. Two seats are made up of High quality rubber(Flat rubber seat -1no,Flexi rubber seat 1no) and linked with rubber coated chain. Double ball bearings are used for smooth and noise free movement.Colouring is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. ISO & NSIC Certified company.

Providing three seater double polish finish black Granite sitting single round bench ( stool type) 100 thick 45cm dia granite slab for bench slab and 150mm dia on middile and 30cm on end posts including cost and conveyance and fixing in position etc., complete

Supply and installation of 48 watts LED based Street Light luminaire made up of extured alluminium alloy body sealed toughened glass protector and pc side Covers. The optical and control Gear compartment should be with IP66 Tightness. Leds in Natural White (4000-4)

Supply and fixing of 2 x 1.5 sq mm Copper cable from pole switching point to light fittings etc., complete

Supply and fixing of light post 6.00 M length with gradually reduce type pole 3 stages using 75mm and 50mm and 25mm size and bent up to top edge LED including fiber connection junction box internal wiring works on each pole inculuding cost and conveyance etc., complete

Supply and Fixing of 100A Panel Board incoming 100A TPN Switch with various range of TP/DP/SP MCB with suitable angle iron frame work etc., complete

Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey etc.,Complete

V B N BUILDERRS (BID ID -1134536)