REPAIR/REPLACEMENT OF WOODEN FURNITURE AT NIMU AND NURLA MIL STN UNDER AGE(I)NIMU

Amount

Repair to following parts of Bed plytop (FD-246)

Removing of unserviceable back rest of bed and S&F New back rest as per existing size and shape of 1st Class seasoned teak wood incl polishing two coat of over coat of wood filter after preparation of surface etc.

Removing of unserviceable foot rest of bed and S&F New foot rest as per existing size and shape of 1st Class seasoned teak wood incl polishing two coat of over coat of wood filter after preparation of surface etc.

Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI Marked all as shown in Drg .Make Greenply/century/Bhuan board/durian

Removing of old wooden stiffeners and S&F 1st class hard wood stiffeners of size 50x60 suitable for bed all as shown in drg incl polishing two coat preparation of surface etc.

Taking out old UNSV long rail of bed plywood and providing of new long rail of 1st class HW (Sheesham) of exiting shape and size all as specified and Drg incl polishing two coats of wood filter after preparation of surface etc.

M&L for preparation of wood of bed plywood and provide of new short rail 1St class HW (Sheesham) of existing shape and size all as specified and Drg incl polishing two coats of French polish of reqd shade complete all as directed by the Engr -in -charge.

Repair to following parts of Chair dining long back FD-357

Removing of old unserviceable rear leg with back and S&F of new rear legs with back of seasoned teak wood all as per drg incl polishing two coat of wood filter after preparation of surface.

All as per item ser no 2.01 here-in-before but front leg.

All as per item ser no 2.01 here-in-before but Rails.

Removing old unserviceable tapestry cloth and foam of cushion for both seat and back of chair and S&F(upholstery) of new tapestry cloth & foam 50mm thick 40 density as per drg and as directed by Engr-in- charge. Make Godraj/Sleepwell/Kurlon

M&L for preparation of wooden surface of chair dining long back by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in- charge.

Repair to following parts of Chair writing FD- 280,FD202 &FD-20

Opening of joints of damage/broken member of chair writing where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning , and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

S&F Front leg (left or right ) Made out of 1st class HW Sheesham teak wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-3.02 here-in-before but Rear leg (left or right ) all as directed by Engr -in -charge.

All as per item No-3.02 here-in-before but front /rear/side members of seat bottom.

All as per item No-3.02 here-in-before but back stiffener.

All as per item No-3.02 here-in-before but bottom stiffener.

S&F front arms made out with 1st class HW seasoned teak wood of size and shape as per existing chair or as per Drg all as per all as directed by Engr -in -charge.

S&F in replacement of shoes with new PVC Shoe of super quality with steel plated screws of suitable size complete as per Drg all as per all as directed by Engr -in -charge.

Re-caning of chair writing with polythene white cane half round as per IS-5378-1968,0.3 mmthick of seat and 3 to 3.22mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Prmier/Ajay.

M&L for preparation of wooden of chair writing by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Repair to following parts of Chair dining (FD-279,FD-228 and FD- 1105),

Opening of joints of damage/broken member of chair dining where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

S&F front leg (left or right):- Made out of 1st class HW seasoned seesham wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-4.02 here-in-before but lear leg (left or right)

All as per item No-4.02 here-in-before but S&F of front /Rear/side rail of chair dining as per directed by Engr-in-charge.

All as per item No-4.02 here-in-before but back members of chair dining.

All as per item No-4.02 here-in-before but bottom stiffner.

S&F in replacement of rubber shoes with new PVC shoes of supper Quality with steel plated screws of suitable size complete all as directed by Engr -in -charge.

Repair to following parts of Chair easy (FD 229,FD 1105)

Opening of joints of damage/broken member of chair easy where required for replacement including removing of cane,if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Re-caning of chair easy with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

S&F Front leg (left or right ) Made out of 1st class HW seasoned teak wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-5.03 here-in-before but Rear leg (left or right ) all as directed by Engr -in -charge.

All as per item No-5.03 here-in-before but Armrest

All as per item No-5.03 here-in-before but bottom stiffener.

S&F in replacement of shoe with new PVC shoe of super quality with steel pelted screws of suitable size complete all as directed by Engr -in- charge.

M&L for preparation of wooden surface of chair easy by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Repair to following parts of Form without back (FD-77)

Replace H/W wooden planks size as per required

Form without back M&L for preparation of wooden surface of form without back by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Repair to following parts of Sofa set (FD-281)

Replace of old unserviceable cushion and supply new cushion with cover of standard density of Sofa set.

Sofa set 5 seater for preparation of wooden surface of Sofa set 5 seater the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Sofa set 4 seater for preparation of wooden surface of Sofa set 4 seater the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Sofa set single seater for preparation of wooden surface of Sofa set single seater the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

Repair to following parts of Table bedside. FD-276,

Tacking down old unserviceable Top of table bed side and S&F new Top of 18/19 mm thick pre-laminated particle board exterior grade ISI marked 1st Class seasoned teak wood beading 4mm thick all round including polishing to beading as per existing shape Opening of joints of damage/broken member of Table bedside where required for replacement ,if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Opening of joints of damage/broken member of Table bedside where required for replacement ,if necessary polishing new parts with french polish including cleaning and preparation of the surface to Shelf with existing surface etc all as directed by Engineer -in-charge.

M&L for preparation of wooden surface of tabe bed side by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge.

Repair to following parts of Table Peg (FD-277)

Tacking down old unserviceable top of Peg table and S&F new size of 18/19 mm thick pre laminated particle board exterior grade SI marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Removing of unserviceable broken leg of peg table and S&F New leg1st Class seasoned teak wood all as per drg or existing pattern and incl polishing two coat of over coat of wood filter after preparation of surface etc.

Repair to following parts of Table Centre. FD-235

Tacking down old unserviceable top of Table centre and S&F new size of 18/19 mm thick pre-laminated particle board exterior grade ISI marked and 1st Class seasoned teak wood beading 4mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Tacking down old unserviceable Side Rail of frame any size and S&F Rail of 1st Class seasoned teak wood planned & finishing smooth of existing shape and size and polishing with French polishing (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge

Tacking down old unserviceable leg of table centre and S&F new leg made as per existing size and shape or asper Drg 1st Class seasoned teak wood planned & finishing smooth of existing shape and size and polishing with French polishing (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge

M&L for preparation of wooden surface of table Centre with sun mica top side by scrubbing with grit paper to smooth the surface and applying two coat of french polish of required shade complete all as directed by the Engr -in- charge.

Repair to following parts of Teapoy (wooden ) FD-278

Removing of unserviceable Top of teapoys and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Century/Durain

Removing of unserviceable broken stiffener/long rail/side rails of teapoys and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of teapoy and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of teapoy wooden by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

Repair to following parts of Table writing FD -275

Tacking down old unserviceable top of table writing and S&F new Top made of of 18/19 mm thick pre laminated particle board exterior grade ISI marked and with1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Tacking down old unserviceable bottom stiffeners of table writing and S&F new bottom stiffeners size 50x25 mm thick made out of 1st class as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with existing surface all as shown on drawing and directed by Engr –in – Charge. Greenply/Bhutan/Durain.

Tacking down old unserviceable leg of table writing and S&F new legs made out of 1st class teak wood seasoned all as per Drg or of existing patterns etc including polishing new parts with French polishing including cleaning and preparation of the surface to match with existing surface all as shown on drawing and directed by Engr –in – Charge.

M&L for preparation of wooden surface of table Writing side by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge .

Repair to following parts of Table 600x600x760mm (2'x2') (FD-95(M)/293)

Removing of unserviceable Top of Table 600x600 and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) .) Providing two coats of OG paint over a coat of primer all legs and steel frame as specified and directed by Engr-in-Charge .

Removing of unserviceable broken stiffener/long rail/side rails of table and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of table and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of table by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

Repair to following parts of Table 3'x2' with drawer (FD-282)

Removing of unserviceable Top of table 3x2 and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) providing two coats of OG paint over a coat of primer all legs and steel frame as specified and directed by Engr-in-Charge .

Removing of unserviceable broken stiffener/long rail/side rails of table 3x2 and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of table 3x2 and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of table 3x2 by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

Repair to following parts of Table dining 6 /8 pers (FD-273)

Removing of unserviceable Top of Table 6/8 person and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Century/Durain

Removing of unserviceable broken stiffener/long rail/side rails of tables and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of Table dining 6 /8 pers and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of Table dining 6 /8 persn by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

Table dressing Gents with mirror(FD-230 & FD-379) :- Removing and replacement of old existing broken top of table dressing Gents of any description in any position and replacement of the same with S&F new top of 01 mm laminated sheet of approved shade over and including particle board 12 mm thick and with 1st class Seasoned teak wood of beading 6 mm thick all around including polishing to beading (two or more coats over a coat of wood filter etc) made to shape fixed in position pasted with 01 mm thick laminated sheet on top all as shown on drawing . Specified and directed by Eng in Charge. Make: Greenply/Century/Bhutan Board/Durian

Table dressing ladies with mirror(FD-251 & FD-378) :- Removing and replacement of old existing broken top of table dressing ladies of any description in any position and replacement of the same with S&F new top of 01 mm laminated sheet of approved shade over and including particle board 12 mm thick and with 1st class Seasoned teak wood of beading 6 mm thick all around including polishing to beading (two or more coats over a coat of wood filter etc) made to shape fixed in position pasted with 01 mm thick laminated sheet on top all as shown on drawing . Specified and directed by Eng in Charge. Make: Greenply/Century/Bhutan Board/Durian

Hat stand with mirror(FD- 233 M/362 :- Removing and replacement of old existing broken /damaged top of Hat stand of any description in any position and replacement of the same with S&F new top of 01 mm laminated sheet of approved shade over and including particle board 12 mm thick and with 1st class Seasoned teak wood of beading 6 mm thick all around including polishing to beading (two or more coats over a coat of wood filter etc) made to shape fixed in position pasted with 01 mm thick laminated sheet on top & S&F of new mirror with new peg all as shown on drawing . Specified and directed by Eng in Charge. Make: Greenply/Century/Bhutan Board/Durian

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 6,981.00 and any other reduction if any from quoted amount.

VEE KAY IND

M/S SONAM NAMGIAL