REPAIR TO RECANNING OFALL WOODEN FURNITURE INCLUDING CHAIR VERANDAH AND CONVERTED TO PVC SHEET,SOFA SET, WOODEN ALMIRAH AND ALL TYPE OF WOODEN CHAIRS FURNITURE AND REPLACEMENT OF PLYTOP OF GI CHARPOY,POLISHING OF ALL WOODEN FUNTIURE AT25ED(AF)

Amount

Taking out the unserviceable components without damaging the serviceable components, supply and fix new components made of Teak wood as per drawing and also to match with the existing components including sanding, rubbing and polishing and applying one coat of French polish to new component or complete table after repairs all as specified and directed by Engr-in-Charge. 1 (a)Table 900x600mm w/o drawer Drg No- FD-223, 42, 55, 284 (i) Leg

(ii) Top rail short

(iii) Top rail long

(iv) Stiffener

(v) Side stiffener

2 (a) Removing the worn out tapestry cloth and lining cloth of both seat & back and S&F new tapestry cloth of quality and texture as approved by the GE and lining cloth duly stiched including chain at one side for seat only. Fitting to frame work as shown on drawing including providing matching buttons to back rest all as shown on drawing and as directed by Engr-in-Charge for the following :- 2(a) Sofa set 3 seater with arms

2(b) Sofa set single seater with arms Removing the unserviceable/worn out components without damaging the other components or structure, supply and fix new components given below. The new components shall be made of Ist class Hard wood ( Indian Teak wood ) as shown in drawings and also to match with the existing components including sanding rubbing and applying one coat of French polish to complete after repairs Sofa set three/single seater 2(c) (i)Long rail for 3 seater

(ii) Long rail for single seater

(iii) Side/support rail

(iv) Stiffener of bottom and top

2 (c) Removing/taking out of worn out/unserviceable foam cushion & tapesty cloth from seat and back both of sofa set and S&F new foam cushion 100mm thick 32 density make Jyoti/Pooja/Priya duly covered and stiched with superior quality of tapesty cloth, as approved having chain at one side as per existing shape and size, as shown as drawing or as directed by GE/Engr-in-Charge.

Taking out the unserviceable components without damaging the serviceable components, supply and fix new components made of Teak wood as per drawing and also to match with the existing components including sanding, rubbing and polishing and applying one coat of French polish to new component or complete table after repairs all as specified and directed by Engr-in-Charge 3(a) Table dining 6 persons Drg No- FD-30, 273 (i) Leg

(ii) Top rail short

(iii) Top rail long

Taking out the unserviceable components without damaging the serviceable components, supply and fix new components made of Teak wood as per drawing and also to match with the existing components including sanding, rubbing and polishing and applying one coat of French polish to new component or complete table after repairs all as specified and directed by Engr-in-Charge (b) Table Computer (i) Drawer complete

(ii) Channel

(iii) Keyboard top

1 (g) Table Bed Side FD-28, 248, 276 (i) Side (LT & RT)

(c) Table Bed Side FD-28,248,276 (i) Side (L&T)

(ii) Shelves

(d) Table Centre FD-29, 235, 274 (i) Leg

(ii) Long rail

(iii) Short Rail

(e) Table Peg FD-25, 236, 277 (i) Leg

(ii) Side rail

(f) Teapoy FD-278 (i) Leg

(ii) Long Rail

(iii) Short Rail

(g) Table dining 8 Persons FD-30, 239, 273 (i) Leg

(ii) Top rail short

(iii) Top rail long

(h) Table dressing Gents FD-31, 230 (i) Mirror

(ii) Drawer complete

(j) Table dining 4 persons Drg No- FD-30, 273 (i) Leg

(ii) Top rail short

(iii) Top rail long

Removing the unserviceable/worn out components without damaging the other components or structure of chairs,supply and fix new components given below. The new components shall be made of 1st class Hard wood (Indian Teak wood) as shown in drawing and also to match with the existing components including sanding, rubbing and applying one coat of French polish to complete chair or only component after repairs (a) Chair Easy FD-17,201,229 (i) Front Leg

(ii) Rear Leg

(iii) Top and bottom rails of back frame and front rail of seat frame

(iv) Sides and rear rail of seat frame and side rail of back frame

(v) Arm rest

4 (b) CHAIR DINING ( FD-203, 228, 279 ) (i) Front Leg

(ii) Rear Leg

(iii) Top rail

(iv) Back rest

(v) Stiffener

4 (c) CHAIR WRITING FD-20, 202, 250, 280 (i) Front Leg

(ii) Rear Leg

(iii) Top rail

(iv) Back rest

(v) Stiffener

(vi) Arm rest

Removing the unserviceable/worn out components without damaging the other components or structure, supply and fix new components given below. The new components shall be made of Ist class Hard wood ( Indian Teak wood ) as shown in drawings and also to match with the existing components including sanding, rubbing and applying one coat of French polish to complete after repairs 4 (d) Side Board FD-26, 241 (i) Leg

(ii) Long rail

(iii) Short rail

(iv) Removing the unserviceable/worn out components without damaging the other components or structure of side board, supply and fix new components given below. The new components shall be made of pre-laminated particle board interrior grade make ECO BOARD/Kit ply/Assam power as shown in drawings and also to match with the existing components including and applying one coat of French polish to edge beading after repairs (v) Top

(vi) Shutter

(vii) Drawer

(viii) Removing of old damaged/unserviceable knob/Handle from side board and replacing new knob of best quality fixed with suitable size of screw to table and as directed by Engr-in-Charge.

(ix) Removing of old damaged/unserviceable continuous hinge from side board and replacing new continuous hinge of best quality fixed with suitable size as required of screw and as directed by Engr-in-Charge.

Removing the unserviceable/worn out components without damaging the serviceable components, supply and fix new components all as given below. The new components shall be made of 1st class hard wood (Indian Teak wood) as shown on respective drgs and also to match with the existing components, including sanding rubbing and polishing to complete repairs. 4(e) Stool Dressing FD-27, 252, 282 (i) Leg

(ii) Side rail

(iii) Stiffener

Removing of old damaged/unserviceable table top from table and replacing the top with 18 mm thick pre-laminated particleboard (one side teak face another white balancing coat) 6 mm thick teak wood beading all around and fixed with suitable size of screws to table frame as per drawing including polishing to teakwood edging all as specified and directed by Engineer-in- Charge 5 (a) Table 900x600mm w/o drawer FD-223, 55, 284

Table Writing FD-33, 249, 275

Table dining 6 persons FD-30, 273

Table 900x600mm with drawer FD-224, 283, 284

Table Centre FD-29, 235, 274

Table dining 8 persons FD-30, 239, 273

Table Peg FD-25, 236, 277

Teapoy FD-278

Table Dining 1200x900

(6) Removing of old cane and recanning with new indigenous plastic cane not made of recycled plastic as per existing pattern and size of cane for any type of chairs (seat & back), Stool dressing, Bin Soild Linen, Coach sofa etc all as specified and shown in the drg and as directed by Engr-in-Charge. FD-75(M0, 16, 203, 227, 228, 20(M), 202, 250, 17, 201, 229, 252, 244, 279, 280 & 282 6 (a)Chair easy

Chair writing

Chair dining

Chair Dining PVC Seat (FD/MAP-II/05)

Stool Dressing

(7) Material and labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with one coat of approved quality of french polish to glossy finish for the following items of furniture :- Chair easy FD-17, 201, 229

Chair Dining FD-16, 149, 226, 279

Chair Writing FD-202, 250, 280.

Table Bed side FD-28, 248, 276

Table dining 8 persons FD-273, 30

Bed Hard/Bed Newar FD-21, 246

Sofa set four seater FD-258, 373

Sofa set 5 seater in 3 pieces FD-258, 373

Table dining 6 pers FD-273, 30, 239

Table writing FD-249, 33, 275

Table 900x600 with/without drawers FD-41, 283, 224, 42

Table peg FD-25, 236, 277

Teapoy FD-34, 232

Table Dining 1200x900

Almirah Large Wooden

) Bin Linen Multipurpose

WOODEN FURNITURE Removing the unserviceable/worn out components without damaging the serviceable components, supply and fix new components all as given below. The new components shall be made of 1st class hard wood (Indian Teak wood) as shown on respective drgs and also to match with the existing components, including sanding, rubbing and polishing to new component provided.1 (a) BED 8 (a) BED HARD (i) Foot board

(ii) Head board

(iii) Long Rail

(iv) Short Rail

(vi) Stiffener

Supply and fix in position 12mm Thick comercial plywood BWR Grade and size 1980mm x 900 mm with teak wood beading with complete plytop Edging of Size Wide and 5 mm thick fixed with Adhesive and Pin Pannel, including drilling 12 nos of Holes of 6 mm dia in plytop and drilling and 8 Nos of 6 mm dia in MS Square pipe support and drilling 4 Nos 6 mm dia holes in shorts in short ralls Gl Pipe complete fixed to GI Pipe charpoy and MS Support with including supply of 12. Nos of 5mm dia and 70mm long GI Nut boll with one Nos Gl wahser for each Nut for Each plywood top, complete all as specdificied and has directed by Engr-in-Charge. Bolt head shall be semi circular

Removing of Old cane and and recanning with new indigenous plastic cane not made of recycled plastic as per existing pattern and size of cane for any type of Chairs (Seat, Back and Arms rest) etc all as specified and shown in the drg and as directed by Engr-in-Charge

Removing of Old cane and weld to all broken parts then sand and paint to all frame with white paint as specified and directed by Engr-in-Charge

M/s Rajesh G Ramsinghani (BID ID -3292900)