REPAIRS TO AC SHEET CGI SHEET MANGALORE PATTERN ROOFS UNDER ZONE 1 AREA OF MCEME UNDER GE MCEME SECUNDERABAD

Demolition of Lime Concrete / Mud Phuska / PCC of any description and in any position not otherwise specifically provided for renewal including taking down Old Tarfelt and Removing debrises beyong MoD land complete all as specified and directed by Engineer-in-Charge.

M&L 40mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in padding concrete (levelling course) on roof complete all as specified and as directed by Engr-in-Charge.(Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height)

M&L for Rendering 10mm thick in CM (1:3) on concrete surfaces of Roof Padding with integral water profing compound @2% by weight of cement content (water proofing compound to be paid separately) finished even and smooth without using extra cement complete all as specified and directed. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height)

M&L for APP Based Polymeric Membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) including 10cm side over lap and 15cm end lap laid over primed surface by torching method all as specified and directed. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height) The roof treatement shall consisting the following work :- (i) Wire brushing and cleaning top surface of tiles, cement plaster terracing or cement concrete, including flashings and junction of parapets, etc. (ii) Applying one coat of bituminous primer conforming to IS 3384 applied @ 1.7 kg/Sqm. (iii) Laying of APP based memberane as specified thickness and weight as mentioned above. (iv) Applying a coat of Solar reflective Bituminous aluminium paint @ 0.1 Kg/ Sqm over the membrane

M&L for Water Proofing on Parapet / Open Tarace / Roof Slab / Facia having narrow width and RCC Roof Gutter including cleaning & surface preparation and making surface dust free and opening the crack more than 0.5 mm in V grove and filling with Epoxy Mortar after applying 01 coat of Asian Paints Epoxy Primer (Resin + Hardner) 02 coats of Asian Paints Ultron Hybrid Polyurea (consumption 01 Kg per 01 Sqm) complete all as specified and directed by Engr-in-charge. (Note : Quoted rate shall be included for Work to be carried out from Ground Floor to Fourth Floor of Bldg Height with all nessary Scaffolding and Demolition, Prepration, Cleaning, Surface Preparation & Application by the Authorised Applicator Only).

M&L for Up Rooting of Vegetation Growth, Shurbs, Small Plants and Small Trees of any Size / Girth from Walls, Roof, Chajja, Shaft etc Building Height up to Four Storey at any location and position of bldg, completely including roots and making good the disturbed surfaces, cleaning the surfaces and filling the disturbed surace with type B0 PCC 1:2:4 (12.5mm Aggregate) and Rendered 15mm thick in CM (1:3) with WPC @ 3.0 kg by weight of cement, Area of Each disturbed surfaces n exc 0.50 Sqm and finishing the surface to match the existing finishes of building complete all as specified and directed by Engr-in-Charge. (Note : The Quoted Rate shal be included for Work to be carried out from Ground Floor to Fourth Floor of Bldg Height with all nessary Scaffolding, Form Work and WPC Compound).

M&L for preparation of old painted surfaces of Brick Wall, Stone Wall, Concrete Wall and any surfaces of any description not otherwise described, over 10cm width or girth and applying Two Coat of Smartcare Anti- Dampness and Efflorescence Paint , complete all as specified and directed by Engr-in-Charge. (Note : Quoted rate shall be included for Work to be carried out from Ground Floor to Fourth Floor of Bldg Height with all nessary Scaffolding and The Paint Strains on Wall / Floor / Joinery / Glass / Wire Mesh / Furnituers shall be cleaned to the satisfaction of Engineer-in-Charge)(MAKE - Asian, Berger, JSW Paint)

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key from wall, ceiling, Chajjas and similar narrow width portion on and scrubbing down with water etc. and removing debrises beyong MoD land complete all as specified and directed by Engineer-in-Charge. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

M&L for Rendering 10mm thick in Brick Work / Concrete Surfaces of Walls set in CM 1:6 finished even smooth without using extra cement complete all as specified. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

M&L for Rendering 15mm thick on fair faces of Brick Work / Concrete Wall surface etc in CM 1:4 finished even and smooth with using water proofing compound @2% without using extra cement complete all as directed. (Note : WPC will be measured separately) (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)