SITC of MGPS work at CHC Cheepa Barod Distt. Baran

eProcurement System Government of Rajasthan Created By: Anil Kumar Jain Created Date/Time: 13-Jan-2022 04:18 PM Tender Title: SITC of MGPS work at CHC Cheepa Barod Distt. Baran Tender ID: 2021_MEDIC_252542_2

Tender Inviting Authority: Tender Inviting Authority: EXECUTIVE ENGINEER, Medical and Health, DIVISION-2, JAIPUR

Name of Work : SITC of MGPS work at CHC Cheepa Barod Distt. Baran.)

SCHEDULE OF WORK / ITEM(S)

Sl.No Bidder Name Estimated Rate Quoted Percentage Quoted Rate in Figures and Words

1.00 Kamtech Associates Pvt. Ltd.(GSTN-08AAACK7619Q1ZW) 34332.00 -10.00 30898.80 Thirty Thousand Eight Hundred and Ninty Eight

2.00 JK ENGINEERING WORKS(GSTN-09AIAPS3357E1Z8) 34332.00 -25.51 25573.91 Twenty Five Thousand Five Hundred and Seventy Three

3.00 M/S S.S. Engineering Enterprises(GSTN-08AVVPS5499M1Z3) 34332.00 -1.00 33988.68 Thirty Three Thousand Nine Hundred and Eighty Eight

4.00 M.R. Engg. Works Pvt. Ltd(GSTN-07AAKCM9223A1ZN) 34332.00 -15.00 29182.20 Twenty Nine Thousand One Hundred and Eighty Two

5.00 UNISSI INDIA PVT LTD(GSTN-07AAACU0024F1ZY) 34332.00 0.00 34332.00 Thirty Four Thousand Three Hundred and Thirty Two

6.00 Med Freshe Pvt. Ltd.(GSTN-07AAACN0168K2ZG) 34332.00 0.00 34332.00 Thirty Four Thousand Three Hundred and Thirty Two

7.00 ATCORP MARKETING(GSTN-NA) 34332.00 -17.50 28323.90 Twenty Eight Thousand Three Hundred and Twenty Three

8.00 BMRCE INFRASTRUCTURE(GSTN-NA) 34332.00 -10.00 30898.80 Thirty Thousand Eight Hundred and Ninty Eight

Lowest Amount Quoted BY: JK ENGINEERING WORKS(25573.91)

eProcurement System Government of Rajasthan Created By: Anil Kumar Jain Created Date/Time: 13-Jan-2022 04:18 PM Tender Title: SITC of MGPS work at CHC Cheepa Barod Distt. Baran Tender ID: 2021_MEDIC_252542_2

Tender Inviting Authority: EXECUTIVE ENGINEER, Medical and Health, DIVISION-2, JAIPUR

Name of Work : SITC of MGPS work at CHC Cheepa Barod Distt. Baran.)

SCHEDULE OF WORK / ITEM(S)

Sl.No Description of Work / Item(s) No.of Qty Units Estimated Rate Kamtech Associates Pvt. Ltd.(GSTN-08AAACK7619Q1ZW) JK ENGINEERING WORKS(GSTN-09AIAPS3357E1Z8) M/S S.S. Engineering Enterprises(GSTN-08AVVPS5499M1Z3) M.R. Engg. Works Pvt. Ltd(GSTN-07AAKCM9223A1ZN) UNISSI INDIA PVT LTD(GSTN-07AAACU0024F1ZY) Med Freshe Pvt. Ltd.(GSTN-07AAACN0168K2ZG) ATCORP MARKETING(GSTN-NA) BMRCE INFRASTRUCTURE(GSTN-NA)

Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount Rate Amount L1 Amount L1 Vendor

.01 Part 'A' NON BSR

1.00 SITC of MGPS pipe of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 Bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016. Third party test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with P.W.D. Electrical BSR 2021 560.00 KG 1270.00 711200.00 1200.00 672000.00 1555.00 870800.00 1491.84 835430.40 1720.00 963200.00 1688.00 945280.00 1360.00 761600.00 1144.60 640976.00 640976.00 BMRCE INFRASTRUCTURE

2.00 SITC of non lubricated ball type Nickel Coated Isolation Valve with adapter & PTFE Seat having quarter turn/Butterfly handle opening of following sizes suitable for flow capacity of required LPM as per the size of valve at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C. Appropriate Test certificate/report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021

3.00 SITC of Gas outlet points Oxy, N2O, (AR-4), (AR-7) and Vaccum (8.7 psig) for dispensing medical gases (oxygen/air/vaccum) at point of use confirming to BSEN ISO 9170-1:2008. The gas outlet are quick connect type , it should have color coding for different gas source and should accept only repective adapters as required.Appropriate Test Certificate/report of product/accessories from OEM shall be submitted. The product should be CE Certified/CE Marked. All as per pre approved by Engineer in charge. For additional echnical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021 100.00 Each 1268.00 126800.00 1250.00 125000.00 1819.00 181900.00 1554.00 155400.00 2054.00 205400.00 1604.00 160400.00 1400.00 140000.00 1888.00 188800.00 125000.00 JK ENGINEERING WORKS

4.00 SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body, double jacketed with flow gradations CE Marked on it. Desired flow will be setteled through rotary knob. Flow range should be between 0 to 15 lpm & work should be executed as per direction of engineer in charge. Appropriate Test Certificate/report of product/accessories from OEM shall be submitted. The product should be CE Certified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 45.00 Set 900.00 40500.00 600.00 27000.00 1232.00 55440.00 745.92 33566.40 1506.00 67770.00 1031.00 46395.00 1200.00 54000.00 1416.00 63720.00 27000.00 JK ENGINEERING WORKS

5.00 SITC of ward suction unit (Suction controller and collection Jar-600 ml capacity) with posibility to configure required capacity collection jar and should meets the requirements as per BSEN ISO 10079-3:2009. The unit must designed to operate with the vaccum line of MGPS. The collection jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature- 18°C to 50°C with ON/OFF facility. The collection jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contaminatin of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination. Appropriate Test certificate/report of product/accessories from OEM shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 45.00 Set 1604.00 72180.00 1250.00 56250.00 2031.00 91395.00 1554.00 69930.00 2438.00 109710.00 3389.00 152505.00 2000.00 90000.00 1646.10 74074.50 56250.00 JK ENGINEERING WORKS

6.00 SITC of valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with BSEN ISO5211:2001 complete with ball type valves and gauges as required for oxygen compressed air and vaccum line. Appropriate Test certificate/report of product/accessories from OEM shall be submited. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021.

7.00 SITC of microprocessor based auto alarm (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS zoning. It should monitors the current status of oxygen / compresssed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-I:2007 Appropriate Test certificate/report of product /accessories from OEM Shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021.

8.00 SITC of Bed Head Panel of 900-1500 MM long made out from high strength extruded aluminium with powder coating with at least 4 Nos 6/16 Amp switch socket and provision for required number of gas outlet points as suggested by the client. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 4.00 Each 10250.00 41000.00 7000.00 28000.00 11822.00 47288.00 10567.20 42268.80 16268.00 65072.00 11460.00 45840.00 10400.00 41600.00 17110.00 68440.00 28000.00 JK ENGINEERING WORKS

9.00 SITC of automatic gas control panel/Change over Panel for oxygen/nitrous oxide control panel cover made for M.S duly powder coated. Compact and fully automatic manifold control system for oxygen services easy to maintain and use Designed with both safety and continuity of flow supply at a constant pressure via two banks of bottled gas cylinders with following status monitoring A- Bank in use (Green Indication) B- Empty bank (Red Indication) Control Panel should have built in LED display to indicate Normal, High & Low line pressure. It should have facility to test all above indicators working perfectly. The control Panel should include pressure gauge to indicate the gas pressure of each header and pipe line distribution pressure. Capable to provide a distribution flow rate in excess of 1200 LPM. The control panel should incorporate manual bypass system in case of failure of shifting mechanism. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Each 120000.00 120000.00 90000.00 90000.00 109900.00 109900.00 111888.00 111888.00 127609.00 127609.00 116201.00 116201.00 108468.00 108468.00 147500.00 147500.00 90000.00 JK ENGINEERING WORKS

10.00 SITC of Oxygen/Nitrous Oxide Manifold System (8,8) with tal pipes NRV-manifold system comprise of bank of 8+8 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 16 no's non return valves & 16 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225 kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Each 44786.00 44786.00 35200.00 35200.00 42988.00 42988.00 55944.00 55944.00 70000.00 70000.00 78232.00 78232.00 44786.00 44786.00 88500.00 88500.00 35200.00 JK ENGINEERING WORKS

11.00 SITC of Emergency Oxygen / Nitrous Oxide Manifold System (2+2) with tail pipes NRV and One DGSS Regulator of Minimum 600 LPM capacity- manifold system comprise of bank of 2+2 cylinders (Bulk cylinder of D type ) capacity manifold high pressure copper pipe of size 1/2"IDx14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 4 no's non return valves & 4 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225 Kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE approved /CE certified. Note: Providing of cylinders is in the scope of Hospital/End client. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. The product should be CE ertified/CE marked. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Each 7525.00 7525.00 12000.00 12000.00 16344.00 16344.00 11188.80 11188.80 13500.00 13500.00 19558.00 19558.00 11197.00 11197.00 53100.00 53100.00 7525.00 Kamtech Associates Pvt. Ltd.

12.00 SITC of Dessicant Air Dryer Output capacity as below with certified microprocessor controller with dewpoint based changeover option Pre-filter rating 0.3 microns, shuttle valve for low pressure drop, All Aluminium resist oxidation & scale formation, dewpoint better than-40o C including fixing on wall with required T&P making connections etc. complete in all respect. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021.

13.00 SITC of compressed air syste should consist on 1 nos. air compressors with electric motors electrical switch gear and automatic control system of following Specification: A) Air Compressor 1 (One) Nos: Type Non-lubricated /Oil-free Minimum capacity 24.43 cfm (Piston Displacement) at 8.5 kg/cm2 cooling air cooled B) Drive electric motor 1 (one) Nos. Capacity 7.5 HP Speed 1440 rpm (syn) drive belt drive Electricity supply 440 volt, 50 hz 3 Phase. C) Starter Star/Delta Control & Switchgear with overload protection including making PCC foundation and fixing withbolts anti vibration pad and making connections complete as required.Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Set 370150.00 370150.00 190000.00 190000.00 271000.00 271000.00 223776.00 223776.00 275000.00 275000.00 373395.00 373395.00 215327.00 215327.00 289100.00 289100.00 190000.00 JK ENGINEERING WORKS

14.00 SITC of Vacuum pump of single stage capacity minimum 3141 lpm/111 cfm (piston displacement) The pump should be suited for maximum working pressure of 29 inch mercury (730 mm mercury) The pump should be fitted with MS channel frame complete having vibration isolators with 1 Nos. silencers at vacuum pump discharge end. The pump should be air cooled 1 sets of isolation valve on return valve and filter should be provided with pumps. Drive Assembly The electrical drive for vacuum pump should consist of suitable TEFC induction motor operating at 1440 RPM and connected through a V-belt. The motor should be suited for 415 V+10% 50 HZ.3 Phase AC supply capacity : 7.5 HP of a reputed make vacuum switch vacuum switch of 0-760 mm range should be provided it should have both NO/NC contracts and suitable for 230 V 50 Hz . AC supply. The vacuum switch should be housed in weather proof casing with 3/8"BSP gas service connection at the bottom of the assembly. Vacuum Filter 1 Nos vacuum filters with drain valve. This filter should be non-ferrous and in line. including making PCC foundaton and fixing with bolts, anti vibration pad and making connections complete as required.Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Set 295000.00 295000.00 180000.00 180000.00 188000.00 188000.00 190209.60 190209.60 205000.00 205000.00 337363.00 337363.00 140773.00 140773.00 283200.00 283200.00 140773.00 ATCORP MARKETING

15.00 SITC of compressed air filtration system and regulating system: one set of 3- stage filter the filters should be made of die cast aluminums housing with epoxy power paint on the outside and anodized surface treatment inside to prevent corrosion and ensure extra long life. The filters should have maximum contaminant removal efficiency with minimum pressure drop. Total 3-stage of filters should be used as mentioned below:- Stage1:- coalescing filters for general purpose protection removind liquid water and oil aerosol to 0.1 mg/cum (0.1 pm) and and particles down to 5 micro. Stage :- 2 particular filter for dust protection removing particles down to 1 micron. Stage:- 3 high efficiency coalescing filters, removing liquid water and oil aerosol to 0.01 mg / cum (0.01 pip) and particles down to 0.01 micron. Janatics regulator 1/2" or 3/4" to be installed for regulating the output air pressure. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 1.00 Set 50000.00 50000.00 30000.00 30000.00 43823.00 43823.00 49728.00 49728.00 75000.00 75000.00 30406.00 30406.00 46800.00 46800.00 76700.00 76700.00 30000.00 JK ENGINEERING WORKS

16.00 SITC of hot dipped galvanized ( inside and outside) and powder coated Air/vacuum receiver tank (as per IS: 7938-1976 and upto date amendment ) for compressed air system/vacuum system to dampen out pulsatin and condense and trap the moisture in the compressed air and also to let oil and other impurities settle down before air passes into the piping with safety valve Drain Valve Pressure gauge and fusible plugs of 1000 litres capacity complete as required including fixing with bolts and making connections complete as required. Appropriate Test Certificate/Report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure "A" attached with PWD Electrical BSR 2021. 2.00 Set 50250.00 100500.00 60000.00 120000.00 47450.00 94900.00 62160.00 124320.00 75000.00 150000.00 80126.00 160252.00 78520.00 157040.00 96760.00 193520.00 94900.00 M/S S.S. Engineering Enterprises

Lowest Amount Quoted BY: JK ENGINEERING WORKS(1819250.00)

BOQ Summary Details Tender Title: SITC of MGPS work at CHC Cheepa Barod Distt. Baran Tender ID: 2021_MEDIC_252542_2

Sheet Name Sl.No Bidder Name Amount Bid Rank

BoQ1 1 JK ENGINEERING WORKS 25573.91 L1

2 ATCORP MARKETING 28323.90 L2

3 M.R. Engg. Works Pvt. Ltd 29182.20 L3

4 BMRCE INFRASTRUCTURE 30898.80 L4

5 Kamtech Associates Pvt. Ltd. 30898.80 L4

6 M/S S.S. Engineering Enterprises 33988.68 L5

7 Med Freshe Pvt. Ltd. 34332.00 L6

8 UNISSI INDIA PVT LTD 34332.00 L6

BoQ2 1 JK ENGINEERING WORKS 1819250.00 L1

2 ATCORP MARKETING 2045972.00 L2

3 M.R. Engg. Works Pvt. Ltd 2126369.28 L3

4 Kamtech Associates Pvt. Ltd. 2247346.00 L4

5 M/S S.S. Engineering Enterprises 2269951.00 L5

6 BMRCE INFRASTRUCTURE 2515258.50 L6

7 UNISSI INDIA PVT LTD 2616740.00 L7

8 Med Freshe Pvt. Ltd. 2820078.00 L8