Repairing and Painting work of Jachcha-Bachcha Hospital under zone-4.

Dismantling of existing plaster including disposal of refuse as directed by engg. i/c. within a distance of 60mtr.

12 mm cement plaster of mix 1:4(1 cement :4 corses)

Finishing walls with Putty approved brand d momfacture and of required shade on uskacorated wall surface to give even shade over including curing and cost of all material, labour, TAP etc required for proper completion of work

Finishing walls with deluxe mulitvurface paint G 1.25 Ltr per 10 Sqm of approved app brand and manufacture and of required shade on ondacurated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work for ne coat over one coat of primer applied 0.75Lar per 10 Sqm

Steel work welded in built up sections framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required In gratings, frames, guard bar, ladder, railings bracketx, gates and similar works

Cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 graded stone aggregate) finished with a floating coat of neat cement, Including cement slurry, hut excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate

Applying priming coat over new steel and other metal surface upto 10cm. In width or girth or small not exceeding 0.10 Sq. M. area after and Including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood. Scrapper, sand papering and knotting including cost of all materials, labour T&P etc required for proper completion of work Painting 1st cout over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cast of all materials, labour, tools and plants etc. required for proper completion of work Extra over item 2 and 2(a) above but for every coat of paint after first coal

Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and IP/NMIL.40x44.45 as bottom and horizontal member ll fitting, glass panes of 4mm thick and locks complete.

Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 13" landing, bolconies, shelves, chajjas, lintels bands, plain, window sills, stair cases and spiral stair cuses above plinth up to floor five. level excluding the cost of centering, shuttering, finishing and reinforcemen, with 1:1.5/3 (1 cement 1.5 coarse sand: 3

Centering & shuttering inchuding strutting, propping etc and removal of form work (upto 5th floor) Retaining walls, return walls, walls (any thickness) including attavhed pilasters, buttersses, plinth and string courses fillets, kerbs, and steps etc

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeupto plinth level. Thermo mechanically treated bars of grade Fe-500D or more

Brick work with common burnt clay (non modular) bricks of class-150 In foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

Complete Wiring as per requirement

Wiring point for light with 1.5 sq. mm. FRESH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire. piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated bakelite sheet etc, complete in all respec

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Supply and fitting of ceiling fan Usha, Khetan, Bajaj L.S.I mark including all complete.

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect

S/F of Exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete

Supply fitting of button holder complete of work including all

Supply and fixing of switch box 250 x 250 x 65 mm size of each approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials.labour and T&P required for proper completion of work as directed at site by the Engineer in charge.

Supply and fixing of 3core copper cable for enternal works etc all complete

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting andbrackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush

Providing and fixing wash basin with CL brackets. 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron Por 5 trap, 10 litre low 100 level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to 15: 7231, with all fittings and fixtures complete, Including cutting and making good the walls and floors wherever require White Vitreous china Orissa pattem W.C. pan of size 580x440 mm with Integral type foot rests

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, In all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of Joints (Payment for grouting of Inints to be made separately) Size of Tile 600x600 mm

Providing and fixing ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge, in skirting .risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and Jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply. Including all CPVC plain & brass threaded fittings, Vc fixing the pipe with clamps at 1.00 mm spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Add 18 % G.S.T.

Please Enable Macros to View BoQ information