Certain Repair to OTM Accn in GH and Fd Hosp under GE (East) Ferozepur Cantt.

Amount

Racking out of cement joints/pointing of bricks work or brick tiles laid flat in floor surface,chanels,roofs etc complete all as specified and directed.

M&L for Flush pointing to brick tiles / tarracing tiles laid flat on roofs in cement mortar 1:3 complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and directed.

All as per srl item No 04 here-in-before but using old bricks retrieved from demolition under ser item 03 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and directed.

Taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in CM 1:3 & applying 02 mm thick wall putty (Birla putty) on the bldg internal surface of wall with uniform thickness incorporating Birla putty @ 2.00 kg/Sqm & making surface absolutely smooth on entire satisfaction of Engineer-in-Charge

M&L for Preparation of old decorated surface of wall and applying one coat of Washable distemper/ Economy emlusion complete all as specified and directed. Make :- Berger Bison Emulsion, Asian Tractor Emulsion, Nerolac Beauty Emulsion or equivalent

M&L for Preparation of new plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for Cement base paint in two coat over a coat of cement wash on newely plastered surface of walls including prepration of surfaces of walls complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and directed.

All as per srl item No 15 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm eachcomplete all as specified and directed.

Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening.

All as per srl item No 17 here-in-before but resecuring, or easing & adjusting without taking down complete all as specified and directed.

Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and directed.

S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

S&F for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

S&F 30mm thick, Flush shutters, solid core construction, with partical board core, commercial type on both sides,one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”

S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed and shown on Drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”

M&L for Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blanckets, any thickness,including cover fillets complete all as specified and directed.

Providing and fixing Gypsum board 12mm thick in ceiling fixed with screw of size 60cmx60cm placed in ceiling including aluminium anodised snap grid frame 605 x 605 mm for false ceiling including hanging arrangements complete all as specified and directed.

S&F in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including 'U' shapes angle at top/ bottom and 3 mm thick PVC angles for windows/door jambs all as per manufacturer’s fixing instructions complete all as specified and directed.

Taking down aluminium door/windows shutters only (area exc 0.5 sqm but not exc 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified & directed.

Hacking out old broken glass (any thickness,size quality or description ) complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

All as per Ser item No 37 herein above but exc 0.5 Sqm in each pane

S&F in repair powder coated aluminium frame for doors, windows, ventilators & Partation with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F in repair powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alum. complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with rubber gasket in squares exc 0.5 sqm in each sheet glass frosted complet all as specified and as directed.

Supply and fixed in repair hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg, etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair Brass mortice lock 75 mm, 2 levers, vertical type complete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint and one coat of primer complete all as specified and directed.

M&L one coats of synthetic enamel paint including preparation of old painted wood or wood bases surface of any description over 10 cm.width or girthcomplete all as specified and directed.

M&L one coats of synthetic enamel paint, including preparation of old painted steel or steel bases surface of any description over 10 cm width or girth complete all as specified and directed.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified and directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and directed.

S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and directed.

S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed.

S&F alluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.

S&F alluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and directed.

S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed.

S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Ditto all as per ser Item No-62 above but fixed in repairs

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and directed.

Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed.

M&L Light shade Vitrified ceramic tile 9-10 mm thick (square or rectangular) polishedarea of each tile not exc 0.38 SM in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F joint free non skid coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in CM (1:6), complete all as specified & directed.

Glazeded ceramic coloured (colour & shade as approved) tile 450x300x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm th set and jonnted in cement slurry and pointed in white or colour X 7 mm th set and jonnted in cement slurry and pointed in white or colour cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

All as per item No 75 here-in-before but 20 mm bore tubing.

M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and directed.

All as per item No 77 here-in-before but 20 mm bore tubing.

Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified and directed. (pipes obtained from item 75 to be reused).

All as per item No 79 here-in-before but 20 mm bore (pipes obtained from item 76 to be reused).

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15mm dia CP Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.

S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed.

S&F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe. complete all as specified and directed.

S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.

S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F Vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S & F single piece WC of size 365x655x765 with flushing cistern and connection pipe P or S trap (Closed pattern incl all necessary accessories like rag bolts, kit/gel gasket etc (including flushing cistern, pvc seat cover, jet and flush pipe complete all as specified and directed. (Make :- cera, Parryware, somani or equivalent)

S & F central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufactures specification complete all as specified and directed.

S & F Wall mixture 3 in 1 with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufactures instruction and as directed.

S & F corner glass shelves 300 mm radius 8 mm thick as per sample radius for bathroom, fixed on suitable support of brass chromium plated clips complete all as specified and directed.

S&F in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all complete all as specified and directed.

S & F toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls withchromium plated (CP) brass screws, complete all as specified and directed.

S&Fof vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed. Fixed in repairs.

S&F for15mm dia bore of cast copper alloy, C.P. urinal spreadre spread water taps for urinal pots fixed in repairs. complete all as specified and directed.

S&F waste fiting brass chromium plated for urinals with long screwed shanks 40mm ,in repair complete all as specified and directed.

M&L for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S & F in repair Health faucet ( ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and Abs wall hook including making connections and fixed in position complete in all as specified and directed.

S&F in repair 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP cuppling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.

S&F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.

S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union. complete all as specified and directed.

S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.

S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded , dry and pointed etc. complete all as specified and directed.

M&L for Granite(of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type a complete all as specified and directed.

M&L machine cut kota stone flooring 18-20 mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L machine cut kota stone 16-18 mm thick as in risers of steps, skirting, dado etc over & including 15mm thick rendering in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing co complete all as specified and directed.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and pigment over sand cushioning complete all as specified and directed. Note: The colour of tiles Red/Yellow approved by Engr-in-charge.

Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation & well ramming complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as copings, kneelers, apex stones, bed plates, kerbs, edge of paver block , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Dismantling plain or corrugated steel sheet/MS sheet/PVC transulent sheet of any gauge thickness and in any position and removing unserviceable materials from site of work complete all as specified and directed.

M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent complete all as specified and directed by Engineer-in-Charge. Note;- The work shall be executed from Authorised Applicator and company.

M&L for 15 mm thick rendering over concrete surface of sunken floor in CM 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using WPC, complete all as specified and directed. (WPC measured and paid separately.

M&L for water proofing treatment to RCC sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturer's instructions.(iii) All CI/PVC traps in sunken slabs to be enclosed with PCC 1:1.5:3(min 15 cm) all round.

Supply only water proffing compound complete all as specified and direted.

M&L for Cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete c complete all as specified and directed.

M/s Sidhu Bros

M/s Harkesh Kumar Bansal

M/S Sandhu Const.Co.

M/s Sarup Singh

Easyways Enterprises

M/s Shri Krishna Enterprises