Provision of Deficient Married Accomodation for Defence Civilians (MES) under CWE (Subs) Bhandup at NCHC Powai

Amount

Schedule-A' Part-I 'Buildings & Structures' Total of Schedule-'A' Part-I B/F from serial page No.25(R)

Schedule-A' Part-II 'Site clearance and Excavation and Earth work' Total of Schedule-'A' Part-II/F from serial page No.26

Schedule-A' Part-III 'Internal Water Supply' Total of Schedule-'A' Part-III B/F from serial page No.30

Schedule-A' Part-IV 'Internal Electrification' Total of Schedule-'A' Part-IV B/F from serial page No.37(R)

Schedule-A' Part-V 'Road , Path and Culverts' Total of Schedule-'A' Part-V B/F from serial page No.41

Schedule-A' Part-VI 'Sewage Disposal' Total of Schedule-'A' Part-VI B/F from serial page No.44

Schedule-A' Part-VII 'Area Drainage' Total of Schedule-'A' Part-VII B/F from serial page No.46

Schedule-A' Part-VIII 'Lift' Total of Schedule-'A' Part-VIII B/F from serial page No.51(R)

Schedule-A' Part-IX 'Lightning Protection' Total of Schedule-'A' Part-IX B/F from serial page No.53

Schedule-A' Part-X 'Fire Fighting/ Alarm System' Total of Schedule-'A' Part-X B/F from serial page No.56

Schedule-A' Part-XI 'External Water Supply' Total of Schedule-'A' Part-XI B/F from serial page No.57

Schedule-A' Part-XII 'External Electric Supply' Total of Schedule-'A' Part-XII B/F from serial page No.64(A)

TO BE QUOTED ITEMS IN PROVISIONAL SCHEDULES

Schedule-`A' Part-II, Site clearance and Excavation and Earth work

Removing surplus excavated material out side MD land. Note: (i) Before quoting the tender, the tenderers are advised to ascertain the distance out side MD land, at which the debris is to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

Schedule-`A' Part-III, Internal Water Supply

S & F Hand shower (Health Faucet) with 1 mtr long easy Flex tube in chrome finished and wall hook with NRV (Back flow preventer) in

Upto 4 storeys

Above 4 storeys and upto 8 Storeys

Above 8 storeys and upto 12 Storeys

Supply and Fix Pressure Relief Valve (PRV) 25mm dia

Supply and Fix Pressure Relief Valve (PRV) 32mm dia

Supply and Fix Pressure Relief Valve (PRV) 40mm dia

Schedule-`A' Part-IV, Internal Electrification

S & F modular type bell ding dong of 2 module size, 2M Chime, 230 V AC, Make : Havells Cat No. AHFCEEW060 or equivalent in Anchor/ L&T conforming to IS: 8884- 1978 complete all as specified and directed.

Supply and fix LED Bulb, 240 V, 50Hz, 9 watts , cool day light, Bulb base B-22, lumen output-825, Lumen efficiency 90% with two years warranty , make Philips/ Wipro/ Syska

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 110 lumen/W, with THD < 20%, IP20 Rated, CRI >80 polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 140V - 270V AC, input frequency 50- 60 Hz, PF > 0.9, with operatinge temprature Upto 45 deg C,SDCM < 5, Class C – Non Replaceable Driver including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. The said product should have BIS Mandotry before tender publish date. Make: Philips Cat-Part No. BN 021 LED10S- 6500 PSU GR S1 or equivalent model of Bajaj or Wipro

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with Lumens Output 2500 Lumens and luminous efficacy of > 110 lumen/W, THD < 20%, IP20 Rated, CRI >80 polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 140V - 270V AC, input frequency 50- 60 Hz, PF > 0.9, with operatinge temprature Upto 45 deg C,SDCM < 5, Class C – Non Replaceable Driver including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. The said product should have BIS Mandotory before tender publish date. Make: Philips BN 021 LED25S 6500 PSU GR S1 or equivalent model of Bajaj or Wipro

S & F 20 W LED street light having high efficiency long life LED module with Lumes out put of 5500 Lumens with high LED efficacy of ≥ 110 lumen/W, integral current electronic LED driver with surge voltage protection of 4KV, IP 66 protection & IK07 Vandal Proof Protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness,Voltage range 140 - 270V/ 50Hz, with Life of 30,000 hrs @Ta 35°C, with Class I Insulation classification, Under certification of IS10322, including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. The said product should have BIS Mandotry before tender publish date. Make: Philips cat no.BRP022 LED 20 CW MR S1 PSU GR or equivalent model of Havells or Wipro

S&F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed.

S&F engery efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed.

S&F engery efficient metallic exhaust fan having blade sweep 300 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed.

Supply, installation, testing and commissioning of 400 A sandwich type, bi-metal copper contact, aluminium busway (3L + N + PE), with class F insulation, with 1.6 mm epoxy painted housing ,100% neutral, 25 kA for 1 second, 50% internal earth, complete with all supports all as specified and given in PS and all as directed.Make: L&T, ABB, Siemens

Straight riser length

Horrizontal / vertical bends

Flange end

Adopter box for connection

Support bracket/hangers for horizontal installation

Spring hangers for vertical installation

End cover

Tap-off units with FP MCCB (up to 100 A)

Plug in points

Copper braided flex connection 350 mm with nut bolts complete

Expansion Joint

Plug in points

Horrizontal / vertical offsets / elbow /TEEelbow

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed.

6- 32 A, SP MCB, C- curve

MCB SPN 32 A C curve, 240 V 50 Hz AC

40- 63 A, FP MCB, C- curve

Supply and fix AMR meters tamper proof, single phase, 4 wire, 240 Volts, 10-60 amps, 50 Hz, digital type LCD display, confirming to IS-13779 class-I, and relevant IEC standards with inbuilt low power radio frequency (LPF ) communication facility in cyanconnode or equivalent 865-867 Mhz mesh network with default and on demand display billing data generation facility, anti tamper feature Microprocessor and LED/LCD based circuitry. Make L & T or equivalent in AE /Secure"

Supply, installation and commissioning of Storage type geyser 25 L capacity, Suitable for 240 V 50 Hz AC Supply,PUF insulation, incoloy glass coated heating element, anode rod, adjustable knob, multi-functional safety valve ,4 star rated, complete as specified and directed. Make: Havells Model Monza EC 5 S or equivalent model of Racold/ AO Smith

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork in any strata complete, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed. Note: Earthing for other schedules also included in this item and shall be measure here.

Schedule-`A' Part-VIII, Lift

M&L for Earthing complete with copper earth plate electrode 60cm x 60cmx 3.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to copper strip 20x3 mm as earthing lead by means bolts and nuts check nuts and washers of brass and connected to main switch board including 20 mm bore medium grade GI Pipe with MS funnel with wire mesh, watering arrangement and 40 mm bore light grade GI pipe for earth lead protection from earth plate to test point or pannel connceting point, PCC chamber, CI cover with frame etc including necessary excavation in any type of strata, returning, filling, removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion.

Schedule-`A' Part-X, Fire Fighting/ Alarm System

SITC of ISI Marked 2 core x 1.5mm2, Multistrand copper, FRLS Armoured cable, Red in Colour, laid on surface with GI Saddle-spacers every 0.3 Meters Complete with GI junction Box, lugs, cable compression glands, cable tags and ferruling.

Supply installing of ISI marked carbon dioxide type (CO2) type fire extinguisher capacity ЗKg portable type consisting of mild steel body as per IS:513 mild steel IS 2052 neck ring as per brass valve body test pressure upto 250 kg/cm2 anti corrosive treatment by epoxy polyster coating of 50 micron jet range minimum 2.5 to 3 mtr, working pressure 60-65 kg/cm2 conforming to IS:2078 suitable for B and C class fire complete in all respect and all as specified and directed

Supply, installing of ISI marked, Dry chemical powder (ABC) type fire Extinguisher capacity 4 kg, Portable type consisting of Mild steel body as per IS 15683 Brass valve, anti corrosive treatment by epoxy polyester coating of 50 Microns, complete in all respect and all as specified and Directed.

M&L for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 25x3 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore midium grade GI Pipe with , MS funnel with wire mesh,.watering arrangement and 50 mm bore light grade GI pipe for earth lead protection from earth plate to test point or pannel connceting point , PCC chamber ,CI cover with frame etc including necessary excavation in any type of strata, returning, filling , removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion.

Schedule-`A' Part-XI, External Water Supply

M&L construction of brick masonry valve pit chamber 90 cmX 90 cm and 90cm deep (internal size) with 15cm thick foundation using PCC (1:4:8) type D-2 over 15 cm thick hard core, 23 cm thick ,brick wall built in cement and sand mortar1:4,15mm thick internal plaster including top of floor in cement and sand mortar 1:3,finished even and smooth,without using extra cement ,3mm thick MS sheet cover with 40mm X 40mm X 6mm MS angle frame fixed in PCC (1:2:4) type B-1,coping with 25mmX6mm flat iron hold fasts, hinges, handles, locking arrangements and applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surface including excavation and earth work in any type of soil and disposal of surplus soil to a distance of n exe 50 m complete all as specified.

Supply and install test commission Pumping sets approx 10HP capacity , centrifugal, electric driven, complete with electric motor energy efficient , 3 ph, 415V 50 Hz, 2900 RPM,TEFC Induction type, with head 50 mtrs and discharge 450 lpm, with suitable cable copper for connection 6 runs from starter to Panel MCCB incl NRV and sluice valve of suitable size on delivery side and suitable GI pipe medium grade suction pipe (complete suction and delivery pipe line upto common header foot valve and NRV and Sluice valve on delivery side shall be deemed to be included in the rate quoted) with Normex make Foot valve with nytrile rubber ball inside and PCC foundation as recommended by OEM (For New pump house at G+9 Bldg)

Supply,install, test and commission, Indoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), as per IS-8623, panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted , IP-42 protection Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50x50x6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable gallary chember ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following ( for Prop Pump house Nr G+9 Bldg):-

Schedule-`A' Part-XII, External Electric Supply

Supply install, test and commissioning of HT 12 KV, 3 phase 50 Hz,outdoor type, totally enclosed metal clad RMU unit 630 Amps, 21 KA / 3 sec nonextendible non motorised with two LBS as incomers and 2 VCB's as outgoings complete all as direcetd by E-in-Charge. (at tapping point)

Supply,install, test and commission, indoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted , IP-52 protection Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable gallary chember ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (Main Panel) Note- Neccessary conncetion arrangement shall be made for termination of BBT 400 amps in Panel outgoing at top)

Supply,install, test and commission, Indoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted , IP-52 protection Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable gallary chember ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (UTILITY PANEL)

M&L GI Octagonal poles complete with single arm bracket as specified all for 6 mtrs long with 70 mm top dia and 130 mm bottom dia, made of 3 mm thick tensile sheet alongwith base plate of size 225x225 x12 mm thick incl 04 nos. of M24 x750 long J type foundation bolts incl MCB 6 amps with 4 way heavy duty connector 32 Amps complete with its foundation all as specified by the pole manufacturere all as specified and directed by E-in-Charge (rate quoted shall be inclusive all foundation RCC form work complete)

Supply and fix LED 60 Watts street light fittings complete in street light poles/ Buildings with and including drivers, pressure die cast aluminium housing, prewired complete. The fitting shalll conform to cat No - LSTP 60 CDL of Crompton greaves or Equivalent from Philips/ Wipro

M&L for 3 Core 1.5 Sq mm size multistranded copper conductor PVC unsheathed 650 / 1100 Volt Grade drawn in through steel tubular poles, for interconnection of cable looping box to Street Light Fitting

Supply only Insulating mat confirming to IS-15652-2006 class A with 2.0 mm thick

Supply only Insulating mat confirming to IS-15652-2006 class B with 2.5 mm thick

Supply and fix wall mounted end feed unit box suitable for cable termination on one side and BBT 400 amps on other side complete with accessories for fixing of BBT and LT cable, incl MCCB 320 amps 4 pole 36 KA, with thermal magnetic settings complete. Make-L&T/ ABB/Siemens

Schedule-`A' Part-XIII, Stand by DG Set

Supply installation, testing & commissioning of factory assembled Diesel Engine driven generating set coupled with alternator AC to give continuous output of 100 KVA at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, diesel engine liquid cooled, mounted on common base frame complete with in built fuel tank of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, micro processor based relay panel for automatic starting on mains failure, control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the under mentioned technical specifications as per specified & directed.

(A) DIESEL ENGINE : Water cooled, turbo charged,4/6 cylinder in line, 4 stroke, 1500 RPM under NTP conditions conforming to BS-5514, ISO-3046 with an overload capacity of 10% for 1 Hrs in continuous operation of 12 Hrs complete with the following accessories. (a) Radiator with blower fan with guard (b) Pipe coupling for cooling system (c) Corrosion inhibitor coolant (d) Filters for fuel/lube oil (e) Fly wheel housing and fly wheel suitable for alternator (f) Engine bearing mechanism in fly wheel housing (g) Shut off coil protection with safety for LLOP /HWT/ Over speed/high and low DC voltage. (h) Dry type heavy duty replaceable paper element air cleaner with restriction indicator and vacuum indicators .

(j) Residential silencers. (k) Stainless steel exhaust flexible bellows. (l) Motor driven priming pump. (m) Electric starter motor (n) Battery charging alternator. (o) Exhaust piping made out of "C" class MS Pipe inclusive of all accessories and hardware, necessary support as per manufacturer’s recommendations to sustain back pressure with rain cap. (p) Mineral wool insulation covered with aluminium sheets for the entire length of exhaust pipe as per manufacturer's recommendations. (q) First fill of oil, coolant and diesel during commissioning. (r) Interconnecting copper cabling of adequate capacity between batteries and controller. (s) Fuel pipe. C class (t) Self starter 12 volts DC.

(u) Metering equipments for recording (i) Battery voltage and charging rate (ii) Coolant temperature (iii) Lubricating oil pressure (iv) Engine speed (RPM) (v) Engine hours run (vi) Balance of fuel.

(v) Safety as protection control (Trip and indication) (i) High water temperature (ii) Low Lube oil pressure (iii) Low and high speed trip (iv) High and low DC voltage (v) over speed Stop

(w) Base frame : Sturdy fabricated welded construction, channel iron base frame (duly painted ) for mounting engine and alternator as per manufacturer’s design alongwith AVM pads (x) Battery: 01 Nos , 12 Volt, 180 AH maintenance free with leads and terminals (y) Fuel Tank : Built in diesel storage capacity not less than 12 Hrs running of DG set or as per manufacturers recommendations

(B) ALTRERNATOR : 100 KVA at 0.8 PF lagging, 415 volts, 3 Phase, 4 wire, 50 Hz at 1500 RPM self excited and self regulated with AVR brushless excitation band of voltage ± 1% of rated voltage from no load to full load insulation class H, self ventilated and conforming to IS 4722, BS-5000, IEC 60034-1, IS0 8528, suitable for above mentioned diesel engine. (C) ACOUSTIC ENCLOSURE : Factory made acoustic enclosure (canopy) having size as per OEM all as per latest MoEF/CPCB norms with 75 db at 01 mtr at 75 % load

(D) CONTROL PANEL : Control panel made out of 2mm thick CRCA sheet in suitable compartments front openable duly powder coated, weather proof and long lasting finishing including the followings :- (i) Set of 200 Amps electrolytic copper bus bar for phase and neutral mounted over the hygroscopic PVC insulator. (ii) MCCB ,160 A, 4 Pole microprocessor based adjustable magnetic and thermal release setting 70% to 100%, rupturing capacity 25 KA, 415 volt, 50 Hz with over load and short circuit protections as per approved make – 01 No. (iii) Set of phase indicating lamps showing DG 'ON' and load 'ON' (iv) Voltmeter digital type 0 to 500 volts range : 01 No (v) Amp meter digital type 0 to 100 Amps range complete with suitable CT”s- 01 No. (vi) MF meter digital type incl recording total and running Hrs complete (vii) Instrument fuses (HRC type) viii) Bottom gland plates for incoming and outing cable (ix) Circuit diagram plate

Schedule-`A' Part-XIV, Aviation Lights

Supply and fix obstruction (aviation) light LED type, required integral LED aviation light IP 65, Model No. BGAV-302 Bajaj or equivalent in Wipro/ Philips of aluminium housing with polycarbonate enclosure, complete fixed on roof with GI tubing 40mm upto length 1.2m all as specified and directed.

Supply and fix cable PVC insulated 1100volts grade with stranded copper conductor of size 3 core 2.5 sqmm cable in and including PVC conduit fixed on wall/roof wall/roof with suitable saddles, spacer, screws etc complete all as specified and as directed.

Factory made sheet metal encloser MCB DB SPN 230 Volts 2 way complete with neutral link including MCB SPN 16 AMP - 1 No

Schedule-`A' Part-XV, Comprehensive Maintenance of Lifts

Comprehensive maintenance and repairs of fully automatic electrically operated passenger lift -01 No. of any Make and installed capacity with a carrying capacity of 08 Passenger to serve (G+9 Floors) with AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with/without attendant, automatic center opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) comprising of all devices and accessories through 36 months for all days including holidays etc after expiry of defects liability period as shown below and all as specified and directed to Engr-in-Charge Note : Contractor shall carryout comprehensive maintenance (routine, daily, weekly, monthly, quarterly, half yearly, yearly) as per the MOU with OEM of the lift and maintain all the lifts in serviceable condition 24 hrs x 365 days with out any extra cost.

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

All as per item No. 62.00 to 62.02 above but 16 passenger lift

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

United Sales Corporation

Hem Construction Company

SHRIPATI INFRASTRUCTURES PVT LTD

Idustrial products India

Mukund Enterprises Private Limited