Preparation of Sports Stadium for sports tournament at CWS Tadali

Amount

Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, vines (on boundary walls, fences, etc.), trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, minor trimming/ pruning of branches of some trees, disposal of unserviceable materials with lead upto 5 km, and stacking of serviceable materials at designated places, as per instructions of the Engineer-in-charge or incharge of the premises or their representative(s). Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, etc., the work is to be done through manual means. The workers must be equipped with the required safety gear/ accessories. The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (grass cutter, gardening scissors, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete.

Item code 2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.

Item code 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).

Item code 13.87.2 White washing with lime to give an even shade : Old work (one or more coats).

Item code 13.112.2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Item code 13.100.1 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work.

Letter-writing alongwith painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Colours/ shades to be as directed by the department.

Supply of white lime (for ground marking, track marking, etc.) of approved quality.

Item code 2.25A Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Item code 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Item code 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Item code 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Item code 16.60.1 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with highintensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys,rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage.

Assistance to organizing function(s)/ event(s) including lime lining; cleaning; moving/ shifting tables, chairs, sign boards, banners, flags, etc.; and other miscellaneous jobs as directed. Note: (i) The contractor is required to carry out the above jobs by deploying suitable workers when directed. (ii) Attendance shall be maintained at the designated place. The workers are required to carry an ID card of some government authority (aadhaar card, voter's card, driver's licence, PAN card, etc.). (iii) The contractor's workers shall be equipped with all the safety gear/ accessories required for the job including face masks (if required) (washable & re-usable), raincoats (depending upon weather), gum-boots/ safety shoes, gloves (washable & re-usable), and any other such personal safety accessories as directed. They shall also be equipped with basic tools & equipment required for the jobs described above, such as spade/ phawada, tagadi/ ghamela, thread/ rope, etc. All these personal safety accessories and basic working tools are to be provided by the contractor and their cost is to be included in the rate of this item. (iv) The workers engaged in other items of this work shall not be counted for measurement in this item.

Total impact of GST for the purpose of CTC

ASHUTOSH B.PARIDA (BID ID -1102256)

PRAKASH A. YADAV (BID ID -1102453)