Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAdmitted-Finance 37 PUNJABI COLONY NEAR RAILWAY CROOSING ARYA SAMAJ ROAD MATHURA U P | MATHURA | MATHURA | UTTAR PRADESH | 281001 | ₹41.6 L | L1 | Admitted-Finance |
| 2 | L2₹56.3 LAdmitted-Finance | ₹56.3 L | L2 | Admitted-Finance |
| 3 | L3₹56.4 LAdmitted-Finance VAIDHYA GALI KHERAGARH AGRA 283121 | AGRA | AGRA | UTTAR PRADESH | 283121 | ₹56.4 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | shyam construction L1 | ARCHI ENGINEERS L2 | M/S KAMAKHYA CONTRACTORS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. | 1,451.81 | Cum | 65 ₹94,367.65 Lowest | 100 ₹1,45,181 | 120 ₹1,74,217.2 |
| 2.00 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. | 1,306.63 | Cum | 9 ₹11,759.67 Lowest | 30 ₹39,198.9 | 50 ₹65,331.5 |
| 3.00 | Removing excavated soil/material to a distance not exceeding 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed. | 145.18 | Cum | 18.6 ₹2,700.35 Lowest | 80 ₹11,614.4 | 50 ₹7,259 |
| 4.00 | Material and labor for size of 900x900x900mm repairing old damaged valve pit chamber using 50% new bricks including provision of valve pit steel cover made of 50x50x6mm mild steel angle iron frame covered with 6m thick MS plain black sheet, 03 Nos MS butt hinges both side of 125 mm size medium weight cold rolled and 10mm dia MS round bar handle with provision of two coats of black bituminous paint over one coat of red oxide primer with PCC 1:3:6 type C1 using 20mm graded stone aggregate as in fixing of hold fast bed block in plastering with 1:3 cement mortar complete all as specified and directed. | 3 | Each Job | 1,395 ₹4,185 Lowest | 8,000 ₹24,000 | 5,000 ₹15,000 |
| 5.00 | Material and labor for size of 1050x1050x1050mm repairing old damaged valve pit chamber using 50% new bricks including provision of valve pit steel cover made of 50x50x6mm mild steel angle iron frame covered with 6m thick MS plain black sheet, 03 Nos MS butt hinges both side of 125 mm size medium weight cold rolled and 10mm dia MS round bar handle with provision of two coats of black bituminous paint over one coat of red oxide primer with PCC 1:3:6 type C1 using 20mm graded stone aggregate as in fixing of hold fast bed block in plastering with 1:3 cement mortar complete all as specified and directed. | 3 | Each Job | 1,860 ₹5,580 Lowest | 8,000 ₹24,000 | 6,000 ₹18,000 |
| 6.00 | Supplying, laying, jointing & testing 100mm bore of MS Pipe ERW steel including specials, as per conforming to IS 3589 (1981) thickness 4.8mm including welding fitting and testing specifications in any length, laid in trenches, cutting of hole in building complete with and including necessary joints including taking out MS water mains including fitting with spigot and socket ends complete all as specified and directed. | 50 | RM | 744 ₹37,200 Lowest | 1,000 ₹50,000 | 1,150 ₹57,500 |
| 7.00 | Supplying, laying, jointing & testing 125mm bore of MS Pipe ERW steel including specials, as per conforming to IS 3589 (1981) thickness 4.8mm including welding fitting and testing specifications in any length, laid in trenches, cutting of hole in building complete with and including necessary joints including taking out MS water mains including fitting with spigot and socket ends complete all as specified and directed. | 50 | RM | 837 ₹41,850 Lowest | 1,500 ₹75,000 | 1,400 ₹70,000 |
| 8.00 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 5 | Each | 7,440 ₹37,200 Lowest | 8,000 ₹40,000 | 8,500 ₹42,500 |
| 9.00 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 125 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 3 | Each | 9,300 ₹27,900 | 9,000 ₹27,000 | 8,500 ₹25,500 Lowest |
| 10.00 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 3 | Each | 11,160 ₹33,480 | 15,000 ₹45,000 | 8,500 ₹25,500 Lowest |
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
13 Aug 2026, 6:00 pmClosed
CWE Mathura
HQ CWE Mathura
As per Tender Documents
2026_MES_777487_1
8142/26-27/W/ of 2026-27
Open Tender
Miscellaneous Works
Works
270 days
GE (West) Mathura
As per NIT Documents
7 documents required · 7 mandatory
₹1,000
GE (West) Mathura
₹1.3 L
Yes
3 Sept 2026
9 Jul 2026
20 Aug 2026
9 Jul 2026
13 Aug 2026
30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. | 1,451.81 | Cum | - | - |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. | 1,306.63 | Cum | - | - |
| 3 | Removing excavated soil/material to a distance not exceeding 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed. | 145.18 | Cum | - | - |
| 4 | Material and labor for size of 900x900x900mm repairing old damaged valve pit chamber using 50% new bricks including provision of valve pit steel cover made of 50x50x6mm mild steel angle iron frame covered with 6m thick MS plain black sheet, 03 Nos MS butt hinges both side of 125 mm size medium weight cold rolled and 10mm dia MS round bar handle with provision of two coats of black bituminous paint over one coat of red oxide primer with PCC 1:3:6 type C1 using 20mm graded stone aggregate as in fixing of hold fast bed block in plastering with 1:3 cement mortar complete all as specified and directed. | 3 | Each Job | - | - |
| 5 | Material and labor for size of 1050x1050x1050mm repairing old damaged valve pit chamber using 50% new bricks including provision of valve pit steel cover made of 50x50x6mm mild steel angle iron frame covered with 6m thick MS plain black sheet, 03 Nos MS butt hinges both side of 125 mm size medium weight cold rolled and 10mm dia MS round bar handle with provision of two coats of black bituminous paint over one coat of red oxide primer with PCC 1:3:6 type C1 using 20mm graded stone aggregate as in fixing of hold fast bed block in plastering with 1:3 cement mortar complete all as specified and directed. | 3 | Each Job | - | - |
| 6 | Supplying, laying, jointing & testing 100mm bore of MS Pipe ERW steel including specials, as per conforming to IS 3589 (1981) thickness 4.8mm including welding fitting and testing specifications in any length, laid in trenches, cutting of hole in building complete with and including necessary joints including taking out MS water mains including fitting with spigot and socket ends complete all as specified and directed. | 50 | RM | - | - |
| 7 | Supplying, laying, jointing & testing 125mm bore of MS Pipe ERW steel including specials, as per conforming to IS 3589 (1981) thickness 4.8mm including welding fitting and testing specifications in any length, laid in trenches, cutting of hole in building complete with and including necessary joints including taking out MS water mains including fitting with spigot and socket ends complete all as specified and directed. | 50 | RM | - | - |
| 8 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 5 | Each | - | - |
| 9 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 125 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 3 | Each | - | - |
| 10 | Supply & fixing, jointing and testing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with conforming to IS 14846, both flanged ends and drilled, high tensile steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, including taking down old unserviceable sluice valve complete all as specified & directed. | 3 | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_870745.xls
BOQ • 0.36 MB
Tender81421.pdf
Tender Documents • 1.04 MB
8142amnd.pdf
PDF • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].