JOINERY, FLOORING, TILLING AND OTHER B/R WORK IN MD ACCN AND OTM LOCATED AT HARDING ROAD, NAPIER ROAD AND SUPPLY DEPOT UNDER AGE B/R-I OF GE (I) KANPUR

Amount

Taking down chowkats with shutter (without taking off shutter) from chowkats area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified and directed.

M&L 2nd class HW as in plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.

S&F hold fast of flat iron 25 x 3 mm complete all as specified and directed.

S&F 100 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item.

S&F 125 x 63mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item.

S&F 30 mm thick factory made WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F factory made wire gauged solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely complete all as specified and directed. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including providing stainless steel wire cloth, 4mm thick plain glass panes, necessary hold fast & MS grills for safety purpose be provided complete all as specified and directed. Note: 1. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 2. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm plain sheet glass panes, necessary hold fast shall be deemed to be included in this item. 3. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items.

M&L for factory made uPVC white colour ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass, MS grills and SS Jalli complete all as specified and directed. 1. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm frosted/pin headed sheet glass panes & necessary hold fast shall be deemed to be included in this item. 2. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.

S&F factory made solid panel PVC moulded door shutter 28 to 30 mm thick (styles) with 2, 4 or 6 raised panel design with 2 mm thick PVC sheet on the front face and 2 mm prelam PVC sheet on back face complete all as specified and pattern & design complete all as specified and directed.

S&F PVC but hinges 100mm size complete all as specified and directed.

S&F PVC handle 150mm size complete all as specified and directed.

S&F PVC tower bolt 150mm size complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutter of 2nd class hard (Hollock) open rebated and prepared to receive gauge, glass etc (without sash bars) edge of farming plain, chamfered or rounded fitted with cut and mitred beeds for securing glass etc sizes of members of shutter as specified in SSR part-1 section-8, clause 8.24(a) complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and directed. Note : M&L for 4mm plain sheet glass panes shall be measured and paid saperatly.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and directed. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be measured and paid saperatly

S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specified and directed. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm & 4mm thick frosted/pin headed glass panes as per requiremet shall be deemed to be included in this item.

M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 4mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified and directed.

All as per item No. 25 above but frosted glass / pin headed glass complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and directed.

M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified and directed..

S&F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws complete all as specified and directed.

S&F 100mm size stainless steel, butt hinges, medium weight, and fixed with ss screws complete all as specified and directed.

S&F 150mm long barrel tower bolt of aluminium extruded section complete all as specified and directed.

S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section & fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F 150mm floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs 300mm mild steel, ordinary rat -tail rod pattern spring including roller and roller plate complete and all as specified and directed.

S&F in repairs fancy type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications complete all as specified and directed.

S&F false ceiling SILHOUETTE EXPOSED GRID. The grid shoud be of 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600mm module, cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central "birdsmouth" notches to facilitate fitting of 600mm cross tees. Perimeter trim to be wall angles, secured to walls at 450mm maximum centres. Hangers made of galvanised steel of size 26x26x25x1.2mm with a galvanised thickness of 80 grm/Sqm. A pre straightened hanger wire of dia 2.68mm of 1.83m length , thickness of 80grm/Sqm and a tensile strength of 344 - 413 MPa, alongwith adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner complete all as specified and directed.

M&L for providing 8mm thick ceiling tiles of size 595 x 595 mm , fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, with / without screws, having RH-95%, light reflectance 0.82 - 0.85 complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

All as per item No. 43.00 above but except bricks complete all as specified and directed.

Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, filling for fixing of hold fast etc including necessary formwork etc complete all as specified and directed.

Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.

M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to fair surfaces of wall finished fair and even complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to other than fair surfaces of wall finished fair and even complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint of approved shade complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash as on wall including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.

All as per Item No 57.00 above but as on ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of cement based paint of approved shade including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered surfaces of wall and applying two coat of cement based paint of approved shade complete all as specified and directed.

M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces width or girth exc 10 cm and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified .

M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide & over 10cm width or girth complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. (Note : Debris obtained from dismantling will be dispossed off as directed)

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 68.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 70.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed. (Note : Debris obtained from demolition will be dispossed off as directed)

Material and labour for 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails all as specified and directed

M&L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet including side lipping etc complete all as specified and directed.

All as per item No 76.00 above but in shelf and partition etc complete all as specified and directed.

M&L 100mm size stainless steel hinges auto close type complete all as specified and directed.

M&L 125mm size stainless steel handles complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, steel gates and similar work, cut size, holes punched; including round headed screws, and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded , including bending or turning up, mitred angles, etc. as required. complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, set, jointed over and including 25 mm thick sand cushoning complete all as specified and directed.

ASIA BUILDER (BID ID -3332470)

Khushi Muskan Engineer & Developer (BID ID -3332733)

JEEWAN BUILDERS AND ENGINEERS (BID ID -3331575)

FATEHPUR CONSTRUCTION COMPANY (BID ID -3332631)

U.R ASSOCIATES (BID ID -3331291)

pk enterprises (BID ID -3333846)

M/S UNIQUE ENTERPRISES (BID ID -3333487)