PROVN OF ROOM FOR DENTAL SECTION AND PATHWAY LABORATORY AND PROVN OF 150 MTR LINK ROAD AT NMS UNDER GE (PROJECT) PANAGARH

Amount

Surface excavation n exc. 30 cm deep and averaging 15 cm deep and getting out in soft and loose soil all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and getting out complete all as specified and directed.

Excavating over areas, exc 1.5 m but n exc. 3.00 m deep and getting out in soft and loose soil, complete all as specified and directed.

M & L for broken stone hardcore of guage n exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using (40mm graded stone agg) as in foundation filling & mass concrete, complete all as specified and directed.

M & L for RCC M-25 (Design mix) with (20mm graded stone agg) for footings, foundation beams, plinth beams bases for columns, etc: under reamed piles and mass concrete, complete all as specified and directed.

M & L for RCC M-25 (Design mix) with (20mm graded stone agg) for column , pillars, piers etc, complete all as specified and directed.

M & L for RCC M-25 (Design mix) with (20mm graded stone agg) for Beams, cantilevers, bressummers, lintel ovr 1.50m span etc, complete all as specified and directed.

M & L for Use and waste formwork to sides of concrete foundations, footings, bases of columns plinth beams rough finished flat surface all as specified and directed.

M & L for Use and waste for formwork to sides of pillars, posts, strut, columns with fair finished surface, square or rectangular on plan all as specified and directed.

M & L for Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girder,bressummers, lintels, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed.

M & L for Use and waste to for formwork to chullah hoods, chajjas complete all as specified and directed.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil all as specified and directed.

Removing of surplus soil n. exc. 50 M & depositing where directed at a level n. exc. 1.50 M above the starting level.(soft/loose soil) all as specified and directed.

Supply and fix TMT bar 10 mm dia and over cut ot length and bent to required shape and binding with and including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing clips, complete all as specified and directed.

All as per item no 15 above, but 5mm to 10mm dia as in stirrups, complete all as specified and directed.

M & L for brickwork with subclass 'B' bricks old size straight or curved on plan exc 6m mean radius, builts in CM 1:6, complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick walls built in cement mortar (1:4) all as specified.

M&L for moorum/ red bajri filling in floor and pavement, laid in layers n exc. 15cm thick; watering, ramming/rolling, complete all as specified and directed.

M&L rendering 15 mm thick in cement morter 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement morter 1:4 on brick masonary surfaces or concrete surfaces on other than fair face of wall surfaces with sponge finish, complete all as specified and directed.

M & L for rendering 5mm thick in cement morter 1:3 on concrete surfaces on fair face of ceiling surfaces with sponge finish, complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling and applying three Coats of white wash complete all as specified and as directed.

M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint all as specified and directed over and incl wall putty complete

M&L preparation of newly plastered surfaces of work and applying two coats of oil bound distemper and over a coat of chalk whiting all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.

Supply and fix Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fix Powder coated anodised aluminium frame for doors, windows, ventilators shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01No) hinges type B-21 100mm long (2No) suitable handle (01No) for fixing etc. complete all as specified.

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and directed.

S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as directed.

M&L PCC (1:3:6) type C1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F Harrison rails, mild steel chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed including taking out old one complete all as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed .

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F coloured sheet glass 5.0 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 Sqm in each pan all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Supply and fix door Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L coloured Glazed ceramic tiles in vertical surface 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M&L non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and as directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but n exc 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and as directed.

Supply and fix Rolled mild steel roof trusses (framed) trussed, purlins rail and fastenings and havey brackets framing (Beam, tee, angle, channels or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E 165) complete all specified and as directed.

M & L for preparation of painting to new steel & iron surface of description, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F GI frame work of size of grid 600 x 600mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F white sand Gypsum board False Ceiling of 600mm x 600mm, 9mm thick plain Foil back suitably placed in false ceiling grid made of aluminium/G.I/MS as per specification and drawing

Hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed.

M&L cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed on walls complete all as specified and directed.

M&L cast iron (sand cast) soil, waste and vent pipe 75 mm bore in any length, with or without ears, with cement joints, fixed on walls complete all as specified and directed.

S&F 100 mm bore CI bends (any radius) with ducks foot / heel rest complete all as specified and directed.

S&F 75 mm bore CI bends (any radius) with ducks foot / heel rest complete all as specified and directed.

S&F 100mm bore CI bends (any radius) cowls complete all as specified and directed.

Supply and fix aluminium frame incl aluminium grill conforming to WS 1467 (Hindal-co to fix aluminium grill with aluminium window all as directed

S&F 100 mm bore CI bends (any radius) bends complete all as specified and directed.

Supply and fix 75mm bore CI floor traps, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4),complete all as specified and directed.

M & L SGSW gully traps, square and round mouthed, type P (size 150x150), complete all as specified and directed.

Supply and fix Greating doom 125mm dia with waste hole PTMT (minmum weight 40gms) complete all specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching and haunching including necessary form work complete all as specified and as directed .

Materials and labour for rendering 15mm thick in cement mortar (1:3) on wall finished even and smooth without using extra cement with water proof compound as per manufacturer instruction complete all as specified and as directed (Note: WPC shall be measured and paid separately under respective item).

Supply only integral water proofing compound ISI marked

Material & labour for RCC (1:2:4) type BI (using 20mm graded stone aggregate) as in precast cement concrete for cover slab set in cement mortar (1:6) with necessary form work complete all as specified and as directed .

Supply and fix reinforced concrete pipes class NP2 , laid and jointed complete with collars 150mm bore complete all specified and as directed.

Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate bed to drain pipes including cradal against the sides of pipes after they are laid and tested for 150mm bore NP2 pipes complete all as specified and as directed

Cutting in to exisitng manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 160 of SSR Part -II complete all as specified and directed.

S&F factory made solid PVC Moulded Door Shutter, With Particle Board Core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Molded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page no. 161 of SSR Part -II complete all as specified and directed.

S&F 15 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

S&F 20 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

&F 15 mm dia pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed (Make : Jaquar model no CON-011KN or equivalent in Marc / Cera / Kohler)

S&F chromium plated hand shower health faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed (Make Jaquar code no ALD-CHR-593 or equivalent in Marc / Cera / Kohler).

S&F 100 mm dia brass chromium plated shower rose fixed to steel pipe or union complete all as specified and directed (Make : Jaquar model no OHS-1989 or equivalent in Marc / Cera / Kohler).

S&F stop valves (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F stop valves (chromium plated fancy type) 20 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F stop valves (chromium plated fancy type) 40 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed (Make : Jaquar model no CON-037KN or equivalent in Marc / Cera / Kohler)

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed

S&F brass ball valves 20 mm dia high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and directed.

Supply and fix PVC valveless, syphonic action type 10lit capacity, flushing cistern, low level, white with inlet ball valve, float and handle including brackets comlplete all as specified and directed.

S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, PVC connection 450mm long, flange and bedded in red lead cement complete all as specified and directed.

Supply and fix Vitreous china Urinals, Half stall type (back or corner wall type), complete including providing and fixing plugs bedding urinals against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws.

M & L of Chequered cement concrete tiles 20cm x 20cm x 25mm thick over a 20mm screed bed CM (1:6) all as specified and as directed

M & L 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in subbase, complete all as specified and directed.

Rolling and consolidating road formation surfaces in cutting with 8 to 12 tone power roller, complete all as specified and directed.

M&L for moorum filling in floor and pavement, forming embankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base, complete all as specified and directed.

M & L 150 mm thick (spread thickness) soiling or (sub base) (in two layers and each layer of 75 mm thick)with broken boulder or quarried stores interstices filled. Surfaces formed and rolled and consolidated to required gradient and camber with 8 to 12 tone power roller , complete all as specified and directed.

M & L 150 mm thick (compacted thickness) WBM (in two layers of 75mm thick each layer) compacted thickness each layer to be rolled and consolidated separately with coarse stone aggregate of sand store flint of quartzite of grading-2 (63mm to 40mm) size spread rolled and consolidated to required gradient and camber with 8 to 12 tone power roller(each layer shall be measured and paid separately), complete all as specified and directed.

M & L 150mm thick cement concrete work in pavement/hard standing of flexural strength 40kg/per Sqcm in field using, 400Kg of cement per Cum, complete all as specified and directed.

Finishing surface of concrete roads, pavements, hard standing by brooming, complete all as specified and directed.

Removing excavated material exc. 250m but n exc. 500m and directed

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' thickness of concrete slab 150mm complete all specified and as directed.

M & L for Forming Contraction (Dummy) joints 65mm x 10mm wide, filled with sealing compound Grade 'A' complete all specified and as directed.

M & L continous well burnt clay bricks of sub class B edging with width equal to the width of the brick laid dry on end vertically, complete all as specified and directed.

M & L for Point wiring in consealed conduit with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn through PVC casing caping for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed :-

For one light point controlled by one switch

For one Ceiling/Exhaust Fan point controlled by one swtich

For one socket point 5 Amps on the independent board

For one socket point 5 Amps on same board

All as per item no 100 here in before but for One 6 pin multi, socket outlet, 15 Amps, independent, with cables 2.5 Sq mm of size

Supply and fix Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 3 pin 5 /15 A 5 in 1 flush type with fuse & neon indicator complete all as specified and directed.

Supply and fix Switch socket combination 3 pin 5 amps 2 in 1 flush type with fuse & neon indicator complete all as specified and directed.

Supply and fix ceiling rose 3 pole/PVC/polycarbonate isoloted body complete all as specified and directed.

Supply and fix switch piano flush type single pole, one way 5 Amps complete all as specified and directed.

Supply and fix LED light fitting 20Watt with and including LED tube rod 4 feet long suitable for single phase 230V 50 Hz AC supply complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of size 1.5sqmm( nominal area ) complete all as specified and directed.

Supply and fix LED bldg security light with LED 20Watts IP 65 ,suitable for single phase 230 volts,50 Hz AC supply duly fixed with and including GI pipe bracket up to 600mm long and all accessories complete all as specified and directed.

Supply and fix Power line vertical type DB double door 4 way suitable for MCCB 63 Amps sheet steel enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed complete all as directed.

Supply and fix metal plug and socket DB, 32 Amp, 5 pin, 415 Volt complete all as specified and directed.

Supply and fix MCB, TPN 32 Amp, 415 Volt C curve complete all as specified and directed.

S&F MCB SPN 6 to 32 Amp, 240 Volt C curve complete all as specified and directed.

S&F MCB SP 6 to 32 Amp, 240 Volt C curve complete all as specified and directed.

Supply and fix exhaust fan 380 mm sweep, 900 RPM, heavy duty, AC Single Phase 230/240 volts, metal body with louver shutters including making circular hole in existing wall to accommodate exhaust fan and necessary civil work and making good the disturbed surface complete all as spcified and directed.

Supply and Hanging, ceiling fan, 1200 mm sweep with down rod, canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed.

M/L for Sub main wiring with two run of 4 Sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC casing capping suitable size with all fittings and accessories including one run of 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity and connected to common earth dolly. Note : Two run of 4 sqmm wire with one run of 2.5 sqmm and one run of casing capaing pipe shall be measured against one unit and paid to contractor.

M/L for Sub main wiring with four run of 4 Sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC casing capping suitable size with all fittings and accessories including two run of 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity and connected to common earth dolly. Note : Four run of 4 sqmm wire with two run of 2.5 sqmm and one run of casing capaing pipe shall be measured against one unit and paid to contractor.

Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.

Supply, laying and testing Cable XLPE insulated, screened , PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with standred aluminium conductor of size 25sqmm 4 core complete all as specified and directed.

M&L for sand cushioning for for protrction of cable in trenches all as specified and directed.

Material only for Brick modular sub Class 'B' locally available best quality for laid in tranches with width equal to length of the bricks, above the sand cushioning for cable protection complete all as specified and directed.

Material and labour boring of horizontal holes /trenchless hole for 50 mm bore pipe under the road below 1.50 mtr from the road/hard surface by trencheless technology using ultrasonic technique and including necessary machine without damaging the existing road and getting out in any type of soil and disposal of soil to a distance not exceeding 50 m from the site of work all as directed. Note: Pipe Shall be measured and paid seperately.

Supply and fixing MCCB ,4 pole, 415 volts ,microprocessor based , rated 63 Amps,having repturing capacity 16 KA - 01 No as incomer complete. Note :- All MCCBs of sch shall be conforming Ics= 100% Icu as per IEC 60947 -2 and front LED indication (ready, overload pre-alarm & over load).

Supply and fixing steel water tubing 40 mm dia of bore 'medium grade',galvanised with all fittings laid in trenches / fixing with surface of wall complete all as directed.

Supply and fixing steel water tubing 25 mm dia of bore 'medium grade',galvanised with all fittings laid in trenches / fixing with surface of wall complete all as directed.

Supply and fixing steel water tubing 20 mm dia of bore 'medium grade',galvanised with all fittings laid in trenches / fixing with surface of wall complete all as directed.

Cutting existing steel tubing for alterations or additions up to 40 to 50 mm dia of pipe complete all as specified and directed.

S S ENTERPRISE

SAIBABA ENTERPRISE