REPAIR/ RESURFACING OF ROADS FOR DOMESTIC AREA AT AF STN SURATGARH

Amount

Scarifying or picking gravelled macadam or bituminous macadam surface in area n.exc 400 sqm and exc 50mm & n.exc 100mm deep all as specified and directed.

M&L for Repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths ets; cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm (using paving bitumen of grade VG-10) putting in premixed bituminous macadam using paving bitumen of grade VG-30) blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot holes exceeding 30mm complete all as specified and as directed by the Engineer in Charge.

M&L for premix bitunimuous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen all as specified (binder shall be of 4% weight of total mix)

Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 10 Kg. Per 10 Sqm all as specified

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning with mechanical compressor the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engineer in charge

Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5 Kg. Per 10 Sqm all as specified

M &L for bituminous premixed semi dense asphalted concrete 30 mm consolidated thickness using paving bitumen of grade VG-30 @ 5.5% binder content by weight of total mix, spread by means of self propelled mechanical spread/pavers rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 10 ton capacity complete all as specified and as directed by Engr in charge

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Material and labour at near ground level factory made precast kerb stone (size 300x300x140mm) of M-25 grade cement concrete in block masonary, etc. and weathering, slightly rounded or chamfered angles and throating, set in cement mortar 1:3, complete all as specified and directed.

M&L for preparation of newly plastered/concrete surfaces of any description, not otherwise described, over 10cm width or girth and appying two coats of synthetic enamel paint(First quality), white and blue colour over a coat of primer complete all as specified and directed.

S&F speed bump 100mmx500mmx50mm height made of sturdy plastic, pre-coloured (Black/yellow) and UV stabilisers studded with reflectors on either side and installing by cleaning the surface, grouting the holes and applying epoxy adhesive on the road surface and bumps, placing the bumps on the fixing area and hammer the nails provided with the bump, including removal of existing damaged bumps of any description, complete all as specified and directed.

S & F in repair convex mirror 1000mm dia having clear and definitive mirror mirror image with 130 degree of viewing angle, provided with and including 50x50x4mm mild steel pipe square tube post of length 1.75m and embedded in post holes (size 450x450x600mm) in PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) with necessary bolts, nuts, base plate etc. and welding as required for fixing including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing of prismatic grade retro reflective direction and place identification sign board (both side message) (double post) made of 4 mm thick aluminium composite panel sheeting having frame of angle iron size 32x32xm mm tighned by bolts and having vertical post of 75x75x5mm ms angle iron duly painted with one coat of steel primer and two coats of synthetic enamel paint and 40mm round buffed stainless steel pipe, grade of SS 304 with half round cap wherever required in back support message and numder as per approved by GE for any number of letter and number marking the board with 23mm wide retro reflective micro prismatic tape in golder / white colour shade complete all as specified and directed.

M/S SHRI RAM CONSTRUCTIONS (BID ID -3125137)