REPAIR MAINT TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTINGS AND OTHER MISC WORK IN JCO ORS MD ACCN AT HD ENCLAVE AND COMPREHENSIVE WELCOME MAINT AND RELATED SERVICES IN OFFRS MD ACCN AREA OF AGE BR I UNDER GE MIS MHOW

Amount

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down shuters of any description n.exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down aluminium glazed shutters of any description not exceeding 2.0 sqm for repairing and refixing in the same opening complete all as specified and directed. Note : Builders hardware,glass,wire mesh ,aluminium section etc as required during repairing shall be measured and paid separately under relevant item.

S&F in repairs Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening after repairing complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 2nd class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F Pressed steel frame of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L Cutting holes in brick/block walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick n.exc one brick complete as specified.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate ) for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts, wall ties, hooks for hanging fans, plain angle etc all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple (bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of 150 mm long

S&F in repairs aluminium anodised barrel tower bolt of 150 mm long

S&F aluminum anodised alloy handle of size 150 mm cast type

S&F in repairs aluminum anodised alloy handle of size 150 mm cast type

S&F stainless steel butt hinges of 100 mm long..

S&F Butt hinges, medium weight,cold rolled mild steel of size 100mm

S&F in repairs Butt hinges, medium weight,cold rolled mild steel of size 100mm

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps 30 mm (When open)

Hacking out old broken glass ( any thickness ) size or description from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing glazing pins/ clibs complete all as specified and directed.

S&F glazing with 4mm thick sheet glass ordinary type including rubber beadings/gaskets around glass panes complete all as specified and directed.

All as per item No. 29 above but for figured glass pin headed type complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in iron mesh door and aluminium windows etc complete all as specified and directed.

S&F mild steel 300mm long ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S&F in repairs mild steel 300mm long ordinary rat tail rod springs including roller and roller plate including necessary welding work to fix in steel frame complete all as specified and directed.

S&F in repairs 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F Hasp & staple, 100mm size mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws complete all as specified and directed.

S&F in repairs Hasp & staple,100mm size mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel and iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M& for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with WPC complete all as specified. Note: WPC shall be measured and paid separately under relevent item.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, chajja etc.complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer white or tinted complete all as specified and directed.

M&L for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L for applying three coats of white wash on new ceiling,chajja surface including preparation of surface complete all as specified and directed.

M&L for applying two coats of exterior weather proof water base emulsion paint white/coloured including a coat of primer and over a coat of white cement base putty (if required) on new wall surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of wall surface and application of following water based epoxy resin coating as a dampness treatment for internal wall including filling of cracks with CM (1:4) and making the surface smooth and finish in repair complete all as specified. (a) Complete removal of treatment / plaster (as required ) on internal walls and preparation of surface and rendering with CM(1:4) for application and making the surface wet . (b) Applying first coat of Dr. fixit Dampguard in ratio (1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs. (c) Applying second coat of Dr. fixit dampguard in ratio (1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or other equivalent as approved by GE.

BLANK

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured Ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors , over and including 15mm thick screed in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed..

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including15mm thick screed in CM(1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tile of size 300mm x 200mm X 6-7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in colour cement to match colour of tile complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring over and including 20mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm screed bed in CM 1:4 all spd and directed .

M&L for 60 mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M 35 grade of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L for stone dust under paver block including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore and connection complete all as specified and directed by Engineer - in - Charge.

S&F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls

S&F in repair Vitreous China wash down water closet pan (semi-pedestal pattern) (Anglo-Indian type), white (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel CP or aluminised hinging device.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel CP or aluminised hinging device.

S&F in repair wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repairs 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc. complete all as specified and directed.

S&F in repairs 32mm dia bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 260gms ) complete all as specified and directed.

S&F in repairs10 litre capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

S&F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule as fixed in repairs complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs CP fancy type stop valves, 15mm bore cast copper alloy concealed type , screwed both ends for iron pipe or for union of complete all as specified and directed.

S&F in repairs Angle Stop valves 15mm bore one way, brass chromium plated, fancy type, fixed to iron pipe or for unions complete all as specified and directed.

S&F in repairs CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S&F in repair CP sink mixer with swinging / rotatable spout with connecting legs & wall flanges Make : Plumber or equivalent complete all as specified and directed

S&F in repair fancy type chromium plated two way bib cock of 15mm bore screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repair CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repairs Wall mixture chromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repairs soap dish (oval) type mild steel chromium plated of size not less than 50mm dia complete.

Supply and fix in repairs brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified .

S&F in repair Plastic water closet seat cover, white colour, closed pattern with flat bottom, cover and mild steel CP or aluminised hinging device complete all as specified

S&F in repairs Brass spindle for WHB mixer and Wall Mixer and concealed stop cock (as per sample kept in office) complete all as specified.

S&F in repair PVC float valve set of internal flushing system of PVC flushing cistern of low level complete all as specified & directed

S&F in repair good quality rubber washer for low level flushing cistern complete all as directed.

S&F in repair PVC flush handle for low level flushing cistern complete all as specified

S&F in repair jet spray for pedestal pattern WC including flexible pipe and brass chromium plated nuts complete.

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern all as specified.

S&F in repairs PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified .

S&F in repairs PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as spd.

S&F in repair PVC (SWR) pipe 90 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

S & F in repair stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes,including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed by Engineer -in-Charge.Note : Size of plate rack shall not be less than 900x 1200mm and weight of rack shall not be less than 8.50 kg each.complete all as specified and directed.

S&F in repairs brass chromium plated corner glass shelf with bracket complete all as specified and directed.

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long complete all as specified and directed.

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms) for kitchen sink complete all as specified and directed.

S&F in repair stainless steel grating doom 100 mm dia with waste hole of (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets as in repair complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel powder coated curtain rod including stainless steel decorative brackets, at ends with arrangements as approved by GE complete all as spd and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar including all quions , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks with using Modular size brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as directed and specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed and specified.

M&L for applying a tack coat of industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified .NOTE: (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat shall be measured and paid separately under this item .)

M&L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane shall be carried out through authorised applicator of Manufacturer.

M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as directed and specified.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate 25 mm thick mixed with WPC as in bedding in sunken portions etc complete all as specified and directed.NOTE: WPC shall be measured and paid separately under relevant item.

M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed.

S&F in repairs 40mm dia GI tube medium grade as in spout pipe including cutting in any length as required and fixed to wall & floor etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate ,75mm thick as in plinth protection,subbase etc complete .

M&L for welding in repairs exc 2.5cm but n.exc 5cm in length, thickness of metal to be welded exc 20mm but n.exc 25mm

M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and applying one coat of white wash complete.

M & L for prepararion of old decorated surfaces of ceiling by brooming down, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered and unplastered surfaces and applying one coat of white wash complete.

M & L Preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coat of oil bound distemper complete as directed and specified.

M&L for Preparation of old surfaces of wall by scrapping (any No of layers), washing,rubbing down, and stopping of distempered and apply two coats of oil bound distemper white or tinted all as directed and specified.

M&Lfor providing and applying plaster of paris putty of 2 mm thickness over plastered surface to make the surface even and smooth.

Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F second class hard wood glazed skelten shutter, 35mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters as specified .

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F Aluminium handles, cast type anodised, 75mm size Complete.

S & F in repairs Aluminium handles, cast type anodised, 75mm size Complete.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F in repairs Double action spring hinges 100mm size, brass, with phosphor bronze wire spring,bright polished.

S&F in repairs12mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm as in ,vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dado 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc 250 but n exc 500 litres complete all as specified & directed.

Dismantling water tanks and removing to store of capacity exc 500 litres but n exc 1000 litres complete all as specified & directed.

S & F Rotational moulded polyethylene water storage tanks (double layered) of capacity of 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

S&F of Rotational moulded polyethylene water storage tank (double layered) two layer) of capacity 1000 litres (Cylindrical/vertical with closed top) , ISI marked hoisted and fixed in position complete all as specified and directed.

S & F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified & directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified & directed.

Supply and fix in repair over head tank cover suitable for 500 to 1000 litres capacity all as specified and directed by Engineer-in-charge.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres by applying bleaching powder on surface of tank and cleaned with water completely and from mouth of circulating pipes, etc including writing date of cleaning all as directed

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres by applying bleaching powder on surface of tank and cleaned with water completelyand from mouth of circulating pipes, etc including writing date of cleaning all as directed

S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

S&F 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repairs health faucet with flexible pipe of one meter length including stand complete all as specified and as directed.

S & F in repair Toilet paper holder,Chromium plated as per standred approved by Engineer -in-charge.

S & F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete,

S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed.

S & F in repairs towel ring CP complete all as directed & specified.

S&F in repairs 20 mm dia stainless steel curtain rod including SS decorative brackets, at ends complete all as specified and directed.

S&F in repairs18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 50mm X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item no 164 as above but basket of size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item no 164 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

Material and labour for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 with 12.5mm graded stone aggregate in slope of average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Finally Apply two coats of black bituminous paint on complete surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc. (d) Spray of sand on bituminious surfaces. Note: WPT Shall be done approved applicator & liquid WPC shall be measured & paid seperately under relevent item..

Taking down steel tubing 50mm bore and connection complete all as specified and directed

S & F Galvanised steel tubes 50mm dia medium grade for cattle trap,spout pipe etc including welding, greasing etc all as specified and directed.

S&F in repair providing 25 mm thick pre-cast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid), including all mouldings and including pre-cast frame set in cement mortar 1:6 complete

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A

Dismantling Asbestos corrugated & Semicorrugated etc sheet in roof covering Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at site.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

S&F in repair second class hard wood beads , straight ( any size ) for glazed or gauzed joinery , renewed including mitres etc complete.

Chitragupta Construction

M/S Sunshine Construction