SPECIAL REPAIR TO BLDG NO. T-222, T-143, T-161/0/12 AND SPL E/M REPAIR TO INTERNAL ELECTRIFICATION AND ALLIED WORKS TO BLDG NO. T-790, T-791, T-792, T-795, T-501 AND T-502 AT KARU AREA UNDER GE 860 EWS

Amount

Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed by Engr-in-Charge. (Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as specified & directed by Engr-in charge.

M&L for readymade soft wood wall panelling & Ceiling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included ) as per manufacturers instruction including polishing(with sillar Coat) complete all as specified and as directed by Engr-in- Charge .Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement complete all as specified & directed by Engr-in charge.

S&F in repair for SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring, all as directed by the Engr-in-Charge.

Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as specified & directed by Engr-in charge.

M&L second class hard wood timber scantling bull?nosed, splayed,chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads complete all as specified & directed by Engr-in charge.

Taking down chowkhats or frame exc 1.50 sqm each but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in Charge.

Taking down chowkats with shutter (without taking of shutter from frame) n exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified & directed by Engr-in charge.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr in charge.

S&F 75mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed by Engr-in-Charge.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all as directed.

Supply and fixing 4 mm sheet glass thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

Dismantling wrougth iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engr-in charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed by engr-in-charge.

M&L preparation of Surfaces new or previously untreated surface apply one coat of red oxide,zink chrome and two coat of synthetic enamel (ordinary tint) paint any description, over 10cm in width or girth, not otherwise described complete all as specified and directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc 1 sqm not exc 4 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welde complete all as specified and as directed by Engr-in-Charge.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated/ trapzoidal, semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws / L-type or J-type or cranked hook bolts in lieu of screws with bituminious washer as specified and directed by Engr in Charge.

S&F pre-painted 0.50 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

Resecuring or easing & adjusting of door shutter of any description without taking down exc 1 Sqm but not exc 2 Sqm , completed all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium / copper point wiring for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified & directed by Engr-in charge.

Taking down old burnt/unserviceable main switches and DB's including MCB SP/SPN/TPN of any make and any size, wooden board, junction box and making good distrubed surfaces of wall complete all as specified & directed by Engr-in charge.

M&L Point wiring with 1.5 Sq.mm. FRLS PVC insulated unsheathed copper conductor multi stranded 1100 Volts grade, ISI marking drawn through and including non metallic PVC rigid concealed conduit and conduit accessories medium grade, ISI marked, including modular metal flush box with and including modular white cover plate with frame for mounting modular switches/sockets/fan regulators etc. including one run of 1.5 Sq.mm. PVC insulated unsheathed copper cable for earth continuity, connected to earth dolly, for One light point controlled by one switch or One fan (ceiling fan/exhaust fan/wall mounted/air circulator) point controlled by one switch or one 3 pin socket outlet 5 Amps on independent board on independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item Srl No. 36.00 here-in-before but for one 3 pin socket outlet 15 Amps on independent board with 4 Sq.mm. FRLS PVC wire and one run of 2.5 Sq.mm copper cable for earth continuity.

Description all as per item Srl No. 36.00 here-in-before but for one 3 pin socket outlet 5/6 Amps on independent board with 1.5 Sq.mm. FRLS PVC wire and one run of 1.00 Sq.mm copper cable for earth continuity.

Supply and fix in replacement switch piano flush type single pole, one way 5 Amp complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement Inverter LED lamp,6500K,900lm in white colour of 9 Watt base cap B-22 with poly carbonate difusser and aluminium heat sink complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement Switch socket outlet combination 3 pin, 5 Amp, flush type complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fix in replacement Switch socket outlet combination, 2 in 1, 3 pin 5 and 15/16 Amp, piano flush type, 240 volts, complete all as specified and as directed at site by the Engrs-in-Charge.

Taking down old UNSV sub main wiring & M&L sub main wiring concealed type with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit medium grade 20mm dia. with accessories complete with two runs of 4 Sq.mm. cable and one run of 2.5 Sq.mm. earth wire complete with colour coding and making good the disturbed area complete all as specified and as directed by the Engineer-in-Charge.

Taking down old UNSV sub main wiring & M&L sub main wiring concealed type with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit medium grade 20mm dia. with accessories complete with two runs of 6 Sq.mm. cable and one run of 4 Sq.mm. earth wire complete with colour coding and making good the disturbed area complete all as specified and as directed by the Engineer-in-Charge. Note for Item No. 45.00 & 46.00: Two runs of cable, one run of earth wire and one run of conduit will be measured as one unit.

S&F in replacement energy efficient LED tube light fitting (Mirror optic) with tube 1x20 Watt, 240 Volts, 50 Hz, luminous efficiency 100 Lumen per Watt, CRI>80, PF>0.9, surface mounted, decorative ultra slim square profile LED lighting fixture etc. with extruded polycarbonate environmental friendly, energy efficient ready to use pack complete with mounting bracket etc. including connecting up with 1.0 Sq.mm. 3 core flexible copper conductor cable complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement LED building security light fitting 36 Watt, luminous efficiency 100 Lumen per Watt, CRI>80, PF>0.9, new generation energy saving & environmental frindly long life made up of pressure die cast aluminium housing with high efficient LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP 66 protection pre-wired with 1.0 Sq.mm. copper conductor cable up to connector including 1.5m long GI tubing light grade 32mm dia., bend to shape for fixing on wall/pole with suitable MS brackets nuts and bolts etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement energy efficient LED recessmount light fitting 10 Watt LED down light including all holding mechanisam in floor/walls, 240 Volts, 50 Hz, luminous efficiency 100 Lumen per Watt, CRI>80, PF>0.9, surface mounted, decorative ultra slim square profile LED lighting fixture etc. with extruded polycarbonate environmental friendly, energy efficient ready to use pack complete with mounting bracket etc. including connecting up with 1.0 Sq.mm. 3 core flexible copper conductor cable complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement Recess mounting 2' X 2' LED light 36W, mirror optic luminaire with complete accessories including its connection with 23/0.0076 three core copper twisted flexible cable complete all as specified and directed.

S&F in replacement exhaust fan made out of sturdy engineering plastic complete with louvers shutter, 230 Volt, 50 Hz, 1200 RPM copper winding of sweep 300mm, fixed on wall including making opening, fixing and making good the distrubed surfaces etc complete with and inclussive of making necessary electric connection from ceiling rose to fan through 1 Sq.mm. twin core flexible wire complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement factory made flush shutter type sheet metal enclosure, double door for MCB DB load link, vertical, TPN, 4 way, IP 43 protection, suitable for MCB TPN upto 63 Amps as incommer complete all as specified and directed.

S&F in replacement factory made flush shutter type sheet metal enclosure, double door for MCB DB load link, vertical, SPN, 8 way, IP 43 protection, suitable for MCB TPN upto 63 Amps as incommer complete all as specified and directed.

S&F in replacement factory made flush shutter type sheet metal enclosure, double door for MCB DB load link, vertical, SPN, 12 way, IP 43 protection, suitable for MCB TPN upto 63 Amps as incommer complete all as specified and directed.

Supply and fix in replacement MCB SP-06 to 32 Amp, 240 volts complete all as specified and directed.

Supply and fix in replacement MCB SPN-40 Amp, 240 volts 50Hz AC supply, complete all as specified and directed.

Supply and fix in replacement MCB TPN-6 to 32 Amp, 240 volts 50Hz AC supply, complete all specified and directed.

M&L earthing complete with copper plate electrode 60cmxx60cmx3mm thick, buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth strip 38x5mm size by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 of SSR Part-I connected to earhing test point & anti static flooring all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C1 as in pit, 20mm dia. GI pipe medium grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, and 50mm thick RCC cover slab with handle, reinforced with 10mm dia. bars in both the directions, funnel, strainer, charcoal and testing on completion including taking down old unsv earthing complete all as specified and as directed by the Engineer-in-Charge. Notes:1.Rate quoted deemed to include GI protection pipe, funnel, excavation and earth work, in soft/loose soil with PCC type C1 in bed and pit complete all as specified and as directed.

S&F in repair Steel pipe glavanized grade of 40 mm core laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete all as specifed and directed.

Supply and laying in replacement cable XLPE FRLS Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4.0 core 16 sqmm complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of cable/foundation of pole and stay etc and getting out in hard/dense soil soil complete all as specified and as directed by the Engineer in charge.

Supplying and laying in replacement un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm all as specified and directed.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed by the Engineer in charge. Note: Only punned thickness shall only be measured and paid.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed by the Engineer in charge.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed by the Engineer in charge.

M/S ULTRA INDUSTRIES (BID ID -3237446)

M/S PARTH ASSOCIATES (BID ID -3238928)

M/S TARIQ AMIN LONE (BID ID -3237734)

M/S M P Construction Co (BID ID -3239208)

JOGINDER SINGH (BID ID -3239104)

m/s shanti trading company (BID ID -3239089)