PROVN OF NEW SERVER ROOM AT IT DIV COMPLEX AND CERTAIN SANCTIONED JOBS UNDER THE AOR OF GE DEOLALI

Amount

Surface excavation n.exc.30cm deep and averaging 15cm and getting out in soft / loose soil complete.

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.

Ditto all as per sl item No 2 above but depth exc 1.50m and n.exc 3.0m in hard dense soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material upto a distance exc250m but n.exc 500 m and depositing where directed

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area.

Treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Anti-termite treatment the top surface of filled earth at the rate of 5 lit of emultion per sqm of surface area.

M&L for Anti-termite treatment the soil under plinth protection at the at the rate of 5 lit of emultion per sqm of surface area.

M&L for hardcore of broken stone or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation concrete etc complete all as specified and directed.

M & L for providing reinforced cement concrete (1:1.5:3), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete (1:1.5:3), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete (1:1.5;3), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete (1:1.5:3) Slabs supported on walls,beams and columns in loors,roofs, landings, balconies,canopies, deck slabs and in shelves and the lik complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of Formwork to soffits of suspendedslabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M&L for Flyash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Ditto all as per item no. 23 above but 6mm to 8mm dia complete all as specified and directed.

Ditto all as per item no. 23 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions

M&L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in subbase complete all as directed.

M&L for 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed.

M & L for 15 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed.

M&L for preperation of new surfaces of ceilings, and three coats of white wash over 5mm thik cement plaster of cm 1:4 on ceillings and all as specified and directed.

M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer red oxide zinc chrome etc complete all as directed.

M&L for PCC 1:2:4 type C-1 (using 20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed.

M&L for applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

M & L Vitrified ceramic tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

M & L for Vitrified ceramic tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in SKIRTING etc. with and including 10mm thick BACKING COAT in CM 1:4 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

Supply and fix aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 5mm thick coloured ACP aluminium composite both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. howkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata or equivalent as approved by GE

S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.

S&F 60 mm thickness M-35 Grade factory made rubber moulded machine pressed precast conctete interlocking paver block in grey cement with pigment glossy fininsh and of approved size and shape and size confirming to IS 15658-2006 etc complete all as directed.

M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed.

M & L for Non - skid Glossy finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

M & L for glazed ceramic coloured joint free tiles in vertical surface 450X 350X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.

M&L for 20mm thick black granite (Table rubbed and polished) as in jambs, steps, pillars, window cills, platforms and the like with and including 15mm bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of granite etc complete all as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in cm (1:3) or PCC (1:2:4) for concealed tubing.

Ditto all as per item no. 48 above but 20mm dia.

S&F vitreous china wash basin white flat back size 600x480mm including cutting for and pinning in ends of brackets but including waste pipe including brackets.

S&F PVC connection 15mm size with PTMT nuts of length 600 mm.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet single side pre lam PVC sheet used instead of plain colour reinforced with MS square tube, edges will be painted to match with prelam sheet. Make-Accucel,/rajshree

S&F factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3 mm thick high pressure compact laminated on both side of approved color as infill, with C type GI o 40x20x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.Make-Accucel,/rajshree

S & F Extruded aluminium alloy handles fabricated type anodised 150 mm size.

S & F aluminium anodised, barrel tower bolt of extruded section, 150mm long.

S & F butt hinges,extruded aluminium alloy with galvenised mild steel hinge pin ,anodised and fixed,type B-21 100mm.

S&F angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair all as specified.

S&F 75mm dia CP grating doom fixed complete all as specified and directed by Engr-in-charge

S & F PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron clamp for proper fixing complete all as specified and directed.

S & F PVC ( SWR) bends/door bend /tee/door tee 110mm dia including dismantling of old PVC(SWR) pipe complete all as specified and directed.

S&F vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe) with and including brass chromium plated fancy type flush pin and 40mm bore dia brass chromum plated dome type waste coupling etc complete all as specified and directed.

S & F PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.

S&F mirrors of size 600mm x 450mm with aluminium powder coated frame in handle section fixed with rubber gaskets and fixed to brick/stone masonry walls built in cement mortor etc complete all as directed.

S&F in repairs brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc complete all as directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc complete all as directed.

S&F viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed.

S&F glass shelf of size 600x125mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc complete all as directed.

S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.

S&F 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F 15mm size fancy type Bib taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F in repairs 15mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement

M&L for Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point (Ceiling, wall and Exhaust) controlled by one switch

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No 73 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

S&F for Modular type switch, 1 way,6 Amps, 1 module

S&F for Modular type socket, 2 & 3 pin combined, 6 Amps, 2 module

S&F for Modular type switch, 1 way, 16 Amps, 1 module

S&F for Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module

S&F for Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

S&F for lamp holder PVC cased body bakelite (white) back plate for batten fitting with LED Lamp 10W

S&F for ceiling rose surface bakeletile.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value > 6 Complete all as specified

S&F ceiling mounted 2x2 LED luminaire Pluto neo panel with glare free soft light 34 Watt complete pre-wired all as specified and directed. Make: Havells or equivalent as approved by GE

Supply and fixing LED tube lights fitting, 4 feet long 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix exhaust fan, Plastic body 250mm sweep, with all accessories including frame work in ply wood/ metal in existing window and electric connection all as specified and as directed. Havells Ventil Air - DB NEO/ Eqvt from CG/ Bajaj or equivalent as approved by GE

Suuply and fix powerline vertical DB 8 way IP-43 metal door Suitable for 3 Pole MCCB up to 125Amp 415 V 16 KA as incoming in double door DBs complete all as specified and as directed.

Supply and fix MCCB triple pole and neutral 125Amp 415V 16 KA Thermal release, complete all as specified and as directed.

Supply and fix MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .

S& F MCB SPN 40 TO 63 Amps 240 Volt.

M&L MCB SPN 32 Amp "C " curve

S & F MCB SP 6 to 32 Amps 240 Volt.

S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.

M&L for earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

M&L for earthing complete with Copper plate electrode 600 mm x 600 mm x3.15mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to copper strip 20x3 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.

M&L for earth continuity conductor or main earthing strip coper fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing to connected 20x3 mm Copper strip.

Supply and fixing building LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and lay cable XLPE insulated Heavy duty screanedPVC bedded, galvanized steelstrip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core.

All as item No-98 above but 3.5 core 50 sqmm

All as item No-98 above but 3.5 core 35 sqmm

All as item No-98 above but 4 core 16 sqmm

All as item No-98 above but 2 core 16 sqmm

Supply & lay in trenches double walled corugated HDPE pipe 75 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)

Supply & lay in trenches double walled corugated HDPE pipe 50 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for earthing complete with galvanized earth electro of size 600X600X6mm thick buried directly in ground, earth pit not less than 2.25m deep below normal GL with top edge of the earth plate not less than 1.25m below GL connected with earth strip 32 x 6 by means of check nuts, bolts, nuts, washers of GI all as shown in plate no. 3 of MES sch. Pt 0I, connected to earthing test point necessary excavation, earth work, PCC, RCC cover, watering by funnel etc., all as specified and directed by Engineer-in-Charge complete including testing on completion

S&F 'Tubes "light grade" galvanised iron, laid under roads/drain, fixed to poles, walls, with flat iron clamps bolts/nuts/washers of the following sizes of 50 mm diabore complete all as specified and directed.

S&F tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete all as specified and directed of 40 mm bore

All as item No 111 above but with following accessories:- a) Aluminium bus bar of capacity 300 Amps for Phase-R-Y-B & 150 Amps for neutral -1 No b) MCCB 4 Pole 36 KA , 160 Amp - 1 No (I/C) c) MCCB TPN 100 Amp ,30 KA - 1 Nos d) MCB TPN 32 Amps- 04

M&L for out door type bus bar chamber fabricated by MS sheet of size 3mm and mounted on MS angle iron frame suitable for 415 Volt 3 phase 4 wire AC supply comprising of Aluminium bus bar of capacity 200Amps installed on epoxy insulators consisting of MCB TPN 63 Amps-01 No & MCB SPN-32 Amps-06 Nos. the bus bar chamber should be dust proof, vermi proof and made out of 3 mm CRCA sheet and mounted on 40x40x6mm angle iron,.door is front opening with locking arrange ment. duly powder coated.

Supply and installed air cooled wall split units indoor/outdoor complete with cordless remote control unit with inbuilt air ioniser and plasma filter for better indoor air quality, air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated.

Supply and installed air cooled wall split units indoor/outdoor complete with cordless remote control unit with inbuilt air ioniser and plasma filter for better indoor air quality, air conditioner electric driven, single phase of capacity of 2 TR, BEE 5 star rated.

M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed. (Note:- Incase stone wall to that Casing Caping)

M&L for cutting steel tubing to required length for insertion of new Tee Branches, reducer in any position of 15mm dia pipe line complete all as specified and directed.

S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S&F tubes, 'medium grade', galvanised, with all fitting; for fixing concealed in wall complete of 15mm dia with complete fitting and fixture complte all as specified and directed by Engr-in-charge.

S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of cap 15mm dia complete all as directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of cap 15mm dia complete all as directed

S&F PVC connection 15 mm size for cold water with PTMT nuts of length 450 mm complete all as specified and directed.

S&F CP connection 15 mm size with for hot water with PTMT nuts of length 450 mm.complete all as specified and directed.

S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply .

S & F Geyser 50 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply .

S&F stop valves 15 mm bore CP With crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as directed.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Taking down existing defective LT/HT under ground cable of any size from trenches complete all as directed

M&L for scrubbing out old paint, rust etc from 9 mtr steel tubular pole of any size and making smooth and even surface then painting with one coat of anti rust paint and two coat of superior quality aluminium paint on entire exposed portion of pole structure and writing Abbreviated feeder name in 2 " size with white paint on black base all as directed at site(work shall be completed in the stipulated period as directed by Engineer -in-charge).

M & L in repair sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduite and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit shall be measured as one length.

Supply and fix sheet metal enclosure double door 4way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed.

M&L for cutting steel tubing to required length for insertion of new Tee Branches, reducer in any position of 15mm dia pipe line complete all as specified and directed.

Note: Amount of sch of credit of Rs.16280/-will be deducted from total amount of BOQ.

MANOVANDANA CONSTRUCTION

Sky Vision Construction