REPAIR/MAINT TO INTERNAL ELECTRIFICATION AND SMART PERIODICAL SERVICES, ALLIED B/R REPAIRS WORKS AT 71 RMU, 820 SU, 14 P AND SU, NORTH CAMP, HQ CAC, SNCOs MESS, HAPPY HOME, OFFICE COMPLEX, BEGAM BAZAR AND ADJOINING AREA AT AF STN BAMRAULI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit medium grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item 2.02 above but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC casing caping medium grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item 4.02 above but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

S&F in repair Switch piano 6 amps, single pole, one way, 230 volts

S&F in repair Switch piano 16 amps, single pole, one way 230 volts

S&F in repair Socket outlet 6 Amp 2pin & 3 pin, flush type

S&F in repair Socket out let, 16 amp and 6 amp, flush type

S&F in repair Electronic fan regulator 5 step 230 volts,switch type

S&F in repair Electronic fan regulator 5 step 230 volts, socket size

S&F in replacement Switch socket combination 2 IN 1 3 Pin 6/16 Amp 220 Volt flush type.

S&F in repair Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings.

S&F in repair Capacitor 230 volt, 1 Mfd all as specified and directed by Engr-in-Charge.

S&F in repair Capacitor 230 volt, 2.5 Mfd for ceiling fans

S&F in repair Capacitor 230 volt, 3.15 Mfd for ceiling fans

S&F in repair Switch modular type, 230 volts, single pole, one way, 10 Amp, one module.

S&F in repair Switch modular type, 230 volts, single pole, one way, 16 Amp one module.

S&F in repair Socket out let 5 pin, 10 Amp, 230 volts modular type.

S&F in repair Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type.

S&F in repair Modular Fan regulator step type, 120W - 2 module complete all as specified and directed.

S&F ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&F in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

S&F in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

S&F in replacement calling bell ding dong type 220 volt 50 Htz

S&F in replacement of driver for 2x2 feet LED panel of 36 watt of any model any make as par existing 240 volt 50 Htz 120 watt/lumen 6500k/2700k.

S&F in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 luumen/watt comprising driver locking arrangement prewired completely all as specified and directed.

S&F adore LED lamp 3 star rating 5 watt lumen output 500 Lm all as specified and directed by Engr-in-Charge.

S&F LED Tube rod fittings 4 feet long single side connection complete all as specified and directed.

S&F wall mounted decorative fancy type bedroom light LED type with frosted glass mounted on metalic frame with holder including 12 watt LED bulb complete all as specified.

S&F bed side lamp LED 3 Watt all as specified and directed by Engr in Charge.

S&F decorative wall light 1x 12 Watt TOR, Compete all as specified and directed by Engr-in-Charge.

S&F in replacement of recess mounted complact vertical round shaped down light LED 5 watt suitable for low ceiling height complete all as specified and directed.

S&F in replacement of recess mounted complact vertical round shaped down light LED 2 watt suitable for low ceiling height complete all as specified and directed.

S&F showcase LED lamp light 3 Wat complete all as specifiedd and directed.

S&F in replacement of recess mounted complact vertical round shaped down light LED 15 watt suitable for low ceiling height complete all as specified and directed.

S&F in replacement surface mounted, suare LED down light fitting 15 watts with die cast aluminium housing and system wattage of 12W, including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as specified and directed.

S&F in replacement 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 2.5 Sqmm FRLS PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 4.0 Sqmm FRLS PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 6.0 Sqmm FRLS PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch

S&F in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch Make plaza/Anchor

S&F in repair PVC gang box ISI marked six module for mounting two 5 Amp socket & two switch

S&F in repair PVC gang box ISI marked 9 module for mounting three 5 amp socket & three switch

S&F in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.

S&F in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.

S&F in replacement white cover plate with frame twelve module for modular switches and sockets complete all as specified and directed.

S&F metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

S&F metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

S&F metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

S&F bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt complete all as specified and directed

S&F sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6.0 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S&F sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S&F Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, Make Legrand/Hager/siemense Note : MCBs shall be measured and paid for separately under respective item of this schedule.

S&F Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts,

S&F Factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete and confirming to IS : 8623 complete all as specified and directed.

S&F MCCB, four pole, 415 Volt ,125 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before.

S&F MCCB, four pole, 415 Volt ,100 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before.

S&F MCB, tripple pole and neutral, 415 volts, 32 to 63 Amps rating, 10KA, "C" series fixed in DBs catered herein before.

S&F in replacement MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before.

S&F in replacement MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs catered herein before.

S&F MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before.

S&F connecting and testing LED street light 30 watt 6000k new generation energy saving and enviornmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as specified and directed.

S&F exhaust fan motor capacity 1/4 HP 230 volts suitable for 230/300 mm size exhaust fan complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F 9 W LED Bulbs warm white , high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

M&L for in replacement for only twin core PVC insulated unarmoured cable 4 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

M&L for in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

M&L for tape roll all as specified and directed by Engr-in-Charge.

M&L for preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

All as per item No 75 above but one coat of oil bound distemper on ceiling surface by complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over 1.0 mm wall care putty including chalk whiting complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for complete removal of existing treatment on ceiling surface and applying two coats of oil bound distemper over 1.0 mm wall care putty including chalk whiting complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls incl ncessery scafolding for and other sefaty arrengement for ht up to 15mtr complete all as specified and directed. (Note: Shade and pattern if any will be approved by Engr-in-charge)

M&L for preparation of old plaster surface of wall and applying One coat of apex Exterior emulsion paint on wall surface complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

Complete removal of existing finishes on wall and applying two coats of of cement base paint on wall surfaces complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for complete removal of existing finishes on wall and applying two coats of plastic enamel paint over a coat of primer by Mechanical mean complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for preparing new plaster surfaces of ceiling and applying two coats of oil bond distemper over a 1.5 mm wall care putty complete all as specified and directed.

M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over 1.5 mm wall care puttyr complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

gangotri enteriprises (BID ID -3318449)

Ambrish Builders (BID ID -3318402)