WORK SERVICES FOR OPERATION OF PUMP HOUSE, SLUICE VALVE AND COMPREHENSIVE MAINT AND REPAIR OF BOOSTER PUMP SET AND WATER SUPPLY DISTRIBUTION SYSTEM OF AGV AT AF STN CHAKERI, KANPUR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling, including spreading levelling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil after pipes are laid and tested complete all as specified and directed .

Removing of excavated material not exc 50 m distance and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Work services for operation of pump sets, Fire genrator set with all equipments , Sluice Valves, Gate Valves of any sizes and supply of water as per schedule timing of supply installed in pump houses at Akash Ganga Vihar pump house in three shift (01 operator in each shift semi-skilled) including daily routine cleaning of all equipments and installation all as directed. Tentative shift timing shall be as under, however it can be changed as per site requirement:- (i) 0600 hrs to 1400 hrs (ii) 1400 hrs to 2200 hrs (iii) 2200 hrs to 0600 hrs Notes:- (i) No payment will be made if the trademen found absent and recovery @ Rs 1550/- shall be made for per shift per operator. (ii) Proper attendance register duly signed by JE & Engineer-in-charge and contractor shall be maintained. (iii) Daily log sheet on prescribed format as decided by the Engineer-in-charge shall be arranged by the contractor without any extra cost and shall be submitted to the Engineer-in-charge duly signed by the trademen. The rate quoted under these item is inclusive for the same. (iv) Proper uniform of trademan indicating the name of operator and firm shall be arranged by the contractor without any extra cost. Dress colour shall be approved by GE. The rate quoted under these item is inclusive for the same. (v) The Contractor shall provide normal mobile phones (without camera) with incoming & outgoing facility to contact in emergency during any breakdowns to essential utility services like pump fault, burst water mains etc. Smart phone will not be permitted. (vi) The trademan employed should have ITI in respective trade with two years experience or minimum 10th pass having three years practical experience in the respective fields. (vii) Department shall not be responsible for any accident or injury to any labour while on work. It shall be the responsibility of the contractor to watch the welfare of the labour deployed by him. He shall keep a First Aid Box at site with all necessary medicines. (viii) No operator shall work more than eight Hours. (ix) All T&P required for routine cleaning shall be arranged by the contractor without any extra cost to Govt.

S&F in replacement for MCCB 100 Amp, TP, 16 KA including re-connection of cable complete all as specified and directed. Make- L&T/Legrand/Siemens

S&F in replacement for MCCB 200 Amp, TP, 36 KA including re-connection of cable complete all as specified and directed. Make- L&T/Legrand/Siemens

S&F in replacement of phase sequencer cum pump protection system 415/440 volts, 50 Hz, internal working voltage 12/14 volt, suitable for 50 HP capacity with MNX-95 Contactor in it for auto change of phase sequence if incommimg phase sequence changes, single phasing prevention system and adjustable low and high voltage protection system to protect the machinery, mounting on bracket made out 40x3 mm angle iron frame, all control wirings, cable connections complete all as specified and directed. Make : Indian Engineering Co./United Engineering

S&F in replacement contactor Model No MNX-18 making proper connection with suitable lugs complete all as specified and directed. Make-L&T/Siemens/Legrand

S&F in replacement MCB TPN 415 volts 63 Amps, C type including connectiuon with suitable size almuminium/copper lugs complete all as specified and directed. Make- Legrand/L&T/Siemens

S&F in replacement MCB SPN 240 volts 40 Amp including connection with suitable size aluminium/copper lugs complete all as specified and directed. Make- Legrand/L&T/Siemens

S&F in replacement copper conductor PVC sheathed cable stranded Single core of size 16 Sqmm multistarnded with suitable copper lugs complete all as specified and directed. Make:- Havells/Polycab/Finolex/Gloster

S&F in replacement submersible cable, PVC insulated and sheathed, 3 core, 16 Sqmm, multistranded copper conductor, 1100 volt grade, heavy duty complete all as specified and directed. Make:- Havells/Polycab/Finolex/Gloster

S&F in replacement Bus Bar of 100 A and 415 V, 4 Nos and joining all incoming and outgoing connectiom by suitable Lugs complete all as specified and directed.

S&F in replacement street light fitting 45 watt LED with pressure die cast housing suitable for secondary road/bldgs power consumtion should not be more than 45 watt and power factor should not be less than 0.90 with suitable GI pipe medium grade bracket incl clamps, nuts, bolts and washers etc with all fixing arrangement complete all as per specified and directed. Make- Wipro/Crompton Greaves/Surya

S&F in replacement pressure gauge size 100 mm dia round ISI marked,range 0-10 Kg/cm2 complete with air cock/stop cock complete all as specified and directed. Make:H Guru/Jackson

Receiving complaints minor nature of work including minor fittings such as elbow, socket, tee etc from complaint section / JE / Engr-in-charge by any mode of communication & attending the same within 4 hours. This item is inclusive of all the preliminary work like opening of connections, checking for supply, transportation of necessary tools and labour, assessing the nature of complaints, rectifying minor issues including making connections (as required) and deposting the complaint slip in complaint cell after user signature Note:- The complaints will be communicated to the contractor and the contractor shall rectify the same within 4 hrs of reporting, failing to which a recovery @ Rs 300/= per complaint per day and maximum of Rs. 8000 /= per day shall be recovered from contractor's payment.

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alluminium rod & high density plastic ball ISI marked screwed for iron pipe of the Size 25 mm bore complete all as specified and directed. Make- Leader/Prayag/Zoloto

M&L for overhauling of pump set of capacity 15HP centrifugal type by dismentling the pump set from the location for carrying out following repair/overhauling: (a) Strip opening of pump set. (b) Rematalling of pump shaft by cuttting/welding and turning and polishing to match the existing size. (c) Replacement of ball bearing - 02 Nos (d) Replacement of Pump casing Complete. (e) Replacement of Shaft and shaft Sleeve. (f) Replacement of impeller with GM Impeller with key and check nut. (g) Terminal Plate with 06 Nos Terminals.

Dismantling and taking out Monoblock pump 15 HP, making threading and key way, turning surfacing polishing to impellers, greasing including replacement of worn out parts as per requirement complete all as specified and directed. Note: Spare parts shall be measured & paid separately.

Supply only GM impeller of suitable size & type complete all as specified and directed.

Supply only pump shaft stainless steel of suitable size & type complete all as specified and directed.

Supply only pump shaft sleeve of suitable size & type complete all as specified and directed.

Supply only Gland cover of suitable size & type complete all as specified and directed.

M&L for rewinding of monoblock/centrifugal pump 15 HP with super enameled copper winding wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. including cleaning and testing complete all as specified and directed.

Supply only bearing of model No-6308 complete all as specified and directed. Make- SKF/NBC

S&F in replacement of butter fly valve of size 100 mm bore ISI marked heavy duty including suitable nut, bolt & washer complete all as specified and directed. Make- Sant/Leader/Zoloto

All as per item No 26.00 above but of size 150 mm bore.

All as per item No 26.00 above but of size 200 mm bore.

S&F in replacement of sluice valves class PN-1 ISI marked with suitable CM/L No with flanged ends, with stainless steel spindle duly drilled for nut bolts of size 150 mm dia complete all as specified and directed. Make: Kirloskar/Upadhyay/Kartar/Zoloto

All as per item No 29.00 above but of size 100 mm dia.

S&F in replacement non return valve 150 mm size ISI marked with suitable nut, bolt & washer complete all as specified and directed. Make: Kirloskar/Upadhyay/Kartar/Zoloto

S&F in replacement of battery 12 volts 180AH by replacing complete negative & positive plates & poles PVC separator, electrolytes , parts & initial recharging including testing complete all as specified and directed. Make: Exide / Amco / Tata

S&F in replacement of Gun metal Gate valve with iron wheel, head screwed both ends for cast iron pipe of size 32 mm bore complete all as specified and directed. Make- Sant/Leader/Zoloto/Kartar

All as per item No 33.00 above but of size 50 mm bore.

S&F GI pipe medium grade (ISI marked) with all necessary fittings laid in trenches/floor/wall or cealing of size 15mm bore complete all as specified and directed. Make - Tata / Jindal /Prakash Surya

All as per item No 35.00 above but of size 25 mm Bore.

All as per item No 35.00 above but of size 32 mm Bore.

All as per item No 35.00 above but of size 50 mm Bore.

All as per item No 35.00 above but of size 80 mm Bore.

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ceiling/floors etc with using all new fittings complete including making good the disturbed portion of size 32 mm bore complete all as specified and directed.

All as per item No 40.00 above but of size 50 mm bore.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for re-fixing or removal complete all as specified and directed.

All as per item No 42.00 above but of size 25 mm bore.

All as per item No 42.00 above but of size 32mm bore.

All as per item No 42.00 above but of size 50 mm bore.

All as per item No 42.00 above but of size 80 mm bore.

M&L for construction of valve chamber in replacement 600mm x 600mm x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:6), 230 mm thick, PCC bed (1:4:8) type D2 (using 40mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in cement mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber in replacement 950 x 950 x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:6), 230 mm thick, PCC bed (1:4:8) type D2(using 40mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in cement mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

Demolition, Cement concrete (unreinforced) of any description and in any position complete all as specified and directed .

M&L for providing PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars etc complete all as specified and directed.

S&F in replacement fully automatic star delta starter for submersible pump, 50 HP, 37.5 kW, Range 30-50A including connecting all incoming and outgoing copper wire complete all as specified and directed. Make:-L&T Cat Part No- MN 45 FASD / Legrand/ Siemens as approved by GE.

G S SANDHU & CO.

Charan sales and Service

PAWAN COOL CORPORATION