REPAIR TO WOODEN AND STEEL JOINERY WINDOW/ VENTILATORS ETC UNDER AGE B/R P AT ITARANA, ALWAR

Amount

Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the shutters from the frame) complete all as specified

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) complete all as specified.

Taking down shutters of any description not exc 1 Sqm each and removing from site.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each and removing from site.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking down and refixing existing steel window shutter in same opening after replacement of broken projecting type hinges with box type hinges incl necessary welding complete all as spd and directed by Engineer-in-Charge

Taking down and refixing existing wooden window shutter in same opening after replacement of broken hinges incl necessary welding complete all as spd and directed by Engineer-in-Charge

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed by Engineer in charge

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed by Engineer in charge. Note : The door shall be specified as per pattern & drawing as specified by Engr-in-Charge

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement.

S&F factory Made Solid PVC Moulded Door Shutter, With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR.

Supply and fixing 150 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing in repair 150 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified

Supply and fixing 300 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.

S&F in repairs 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

Supply & fixing butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.

Supply & fixing as in repairs butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked including necessary welding to existing angle iron chowkat at site complete all as specified.

Supply and fixing 150 mm long mild steel pressed handle, oval type, stove enameled black complete all as specified

Supply and fixing in repairs 125 mm long mild steel pressed handle, oval type, stove enameled black complete all as specified

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified.

Supply and fixing as in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar works of Gde E-165(Fe 290) including welding etc. complete all as specified & as directed.

S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165(Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete.

Supply & fixing steel windows with side hung shutters including box type / projecting type hinges with steel handles and peg stay with glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified.

Supply & fixing steel windows with side hung shutters including box type / projecting type hinges with steel handles and peg stay without glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of Zinc Chromate primer complete all as specified.

S & F in repairs 125 mm long mild steel, steel window handle incl nuts & bolts ( all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge.

S & F repair 300 mm long mild steel, steel window peg stay incl nuts & bolts ( all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

Material and labour preparation of newly plastered surface of walls & applying three coats of white wash complete all as specified.

Material and labour preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of white wash complete all as specified.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

Material and labour for preparation of new steel surfaces (already applied with coat of primer) of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of approved tint on existing primer complete all as specified.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with lineseed oil pane putty and spring glazing clips or using silicon for fixing of glass in addition to putty as reqd in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces glazing in repairs complete all as specified.

S&F 4mm thick figured glass pin head type and glazing with oil putty and glazing with lineseed oil pane putty and spring glazing clips or using silicon for fixing of glass in addition to putty as reqd in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, glazing in repairs, complete all as specified.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of 1st quality complete all as specified.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified.

Supply and fixing mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

Supply & fixing butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin type B-21 anodised complete all as specified.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F Alumninium (extruded ) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 o 850 mm in width and of weight between 36 to 60 kg and fixed .

S&F Alumninium (extruded ) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 o 850 mm in width and of weight between 36 to 60 kg and fixed fixed in repair.

M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as directed.

Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F extruded aluminium alloy handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.

Supply & fixing in repair steel rolling shutters, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with bevel gear box and crank handle, thickness of laths 1.25mm complete as directed and all as specified.

Supply & fixing Ball bearing for rolling shutters all as specified and directed.

Supply & fixing Safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.

S & F in repair Ball bearing for rolling shutters including taking down rolling shutter of size not exc 10 Sqm area each and refixing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in Repair safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.

Taking down shutters of any description exc. 2 Sqm each. And removing from site

Taking down shutter of any description exc 2 Sqm each and refixing in same opening icomplete all as directed.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specified.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fixing in Repair brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

S&F in repairs hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F anodized aluminium grill of approved pattern for windows / ventilators / doors complete as directed and all as specified.

M & L for Cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, not exc half brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

M & L for Cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

M&L in repair 18/19 mm Prelaminated particle board, exterior grade, prelaminated both sides with decorative chice lamination fixed with screws to timber frame work work/hinges as in cupboard shutters, shelves, Kitchen cabinets etc with & including necessary 19mm wide & 6mm thick Teak wood beading / edging / lipping fixed with nails to particle board fixed complete all as specified & as directed.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

Checking of joinery (wooden / steel) iron / aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note : (i) Contractor or his authorised representative collect such type of complaints from AGE B/R - P complaint cell at 8.30 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the contractor. Note: Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.

Taking down carefully anodized aluminium door frame including glazed shutters & builder’s hardware complete of area exc 2 sqm and not exc 4 sqm each of any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer (Gareware Sun Control or equivalent) complete all as specified & as directed.

S&F in repairs 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of size 25x8 including `U’ shaped edging all as directed.

S&F in repairs CP conduit pipe bright finished 19/20mm dia as in curtain rod including suitable brackets for pelmet box/cubboard

S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Dismantling of stone chowkhat of any description all as specified and as directed.

S&F 100x75mm single rebated Karoli stone chowkhat with exposed faces closed picked dressed including 4 bolt per upright, erected in position and bedded and pointed in CM 1:3.

M&L running welding in repairs, thickness of metal to be welded not exc 6mm all as specified & as directed.

M&L for running welding in repairs, thickness of metal to be welded exc 6 mm but not exc 9mm, all as specified & directed.

M&L for running welding in repairs, thickness of metal to be welded exc 9 mm but not exc 20mm, all as specified & directed.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

Supplying and fixing in repair factory made PVC shutter of 18 mm thickness consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density manufactured by an ISO 9000 certified company using for shutter celluca ply 18 mm thick cut in desired size of shutter and fixed with frame of kitchen accesory/cubboard at all four edges of shutter using 13/6 size self tapping steel screws. below cooking platform The thickness of the shutter is edfe painted by matching colour of PVC ink of plain colour of PVC sheet using complete all as specified and directed by Engineer-in-Charge and manufacturers specification. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation.

M&L for machine cut 20 to 25 mm thick Green Marble stone slab in single piece as in shelves, steps(i.e riser/treads) cill, etc and similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ball nosing of exposed over 15 mm screed in CM 1: 6 edges and including dismantling old stone slabs complete all as specified and directed

S&F single action frameless Toughened glass door 10-12 mm thick (plain/frosted) panel on rails with mirror polished stainless steel frame.Concealed transom closer. 1760mm pull handles. threshold of any pattern,design & make as approved by GE complete all as specified and directed.

Taking down existing gear or hand operated steel rolling shutters of size not exc 20 Sqm and refixing in same possition including checking various parts with greasing, oiling etc complete all as specified and directed by Engineer-in-Charge.

Taking down existing gear or hand operated steel rolling shutters of size exc 20 Sqm but not exc 25 Sqm and refixing in same possition including checking various parts with greasing, oiling etc complete all as specified and directed by Engineer-in-Charge.

Taking down existing gear or hand operated steel rolling shutters of size exc 25 Sqm and refixing in same possition including checking various parts with greasing, oiling etc complete all as specified and directed by Engineer-in-Charge.

M & L for machine cut Kota stone slab 25mm thick as in shelves & similar works in single piece not exc. 1.50m in length, both side polished and front edge to be half moulded complete, fixed & jointed with grey cement set and pointed in cement mortar 1:4 including rubbing and mirror polishing (top side only and bottom side shall be self finished only), including cutting chases as required and making good to filling as original in cement mortar 1:4 for inserting stone slab shelves in stone/brick walls complete all as specified and directed.

M & L for machine cut 18 to 20mm thick Kota stone as in cill and similar works laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including ball nosing of exposed edges complete all as specified and directed. Note :- Kota stone shall be brought in single piece

S&F in Repair Brass magic eye for door shutter etc. complete all as specified and directed.

S&F in Repair Ball catches for Cubboards , Door and similar works dia steel ball and brass body and striking plate including letting in etc. complete all as specified and directed.

M&L stainless steel square/round pipe of SS 304 grade for frame work as in railing & hard rails with SS plate, nut, bolts etc including drilling/welding/reveting and cutting holes complete all as specified and directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in different opening all as directed.

Easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed

Supply and fixing flush shutter of 30mm thick solid core construction with block board core and plywood face panels with both faces covered with decorative face veneer with lipping/frame and laminated on both sides with self closing circular knob for locking arrangement magic eye and safety chain complete all as specified & as directed.

Supply and fixing 35mm thick MDF based flush shutter (factory made) solid core construction, decorative type on both sides. Flush shutter shall have teak wood edging with self closing circular knob for locking arrangement complete all as specified and directed.

Supply and fixing in repair decorative finials (any design / any type ) for Drapery rods fixed at ends complete all as specified and directed.

Supply and fixing in repair Mild Steel / Stainless steel Brackets for Drapery rods fixed on wall at ends complete all as specified and directed.

Supply and fixing in repair Peg stay Stainless steel aluminium windows fixed in position complete all as specified and directed.

Rubber door seal 32 mm wide with aluminium strip of size 19 mm wide fixed with machine steel screw washer fixed in repair complete all as specified and as directed.

Satish kumar and company

J.J.ENGINEERING

Choudhary Traders and Engineers