Establishment of New Medical College attached with existing District/Referral Hospital at Dhubri , Assam (Solar Power System)

Amount

Supplying , installation, testing and Commissioning of ON-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. HOSPITAL BUILDING

Supplying , installation, testing and Commissioning of ON-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. MEDICAL COLLEGE BUILDING

Supplying , installation, testing and Commissioning of OFF-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient Temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. >Storage Battery - 12 V , 150 AH. > Nos. of Battery- As per requirements. >Battery Backup-3 Hrs. HOSTEL BUILDING ( BOYS)

Supplying , installation, testing and Commissioning of OFF-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient Temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. >Storage Battery - 12 V , 150 AH. > Nos. of Battery- As per requirements. >Battery Backup-3 Hrs. HOSTEL BUILDING ( GIRLS)

Supplying , installation, testing and Commissioning of OFF-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient Temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. >Storage Battery - 12 V , 150 AH. > Nos. of Battery- As per requirements. >Battery Backup-3 Hrs. HOSTEL BUILDING ( BOYS INTERN)

Supplying , installation, testing and Commissioning of OFF-Grid Roof Top Solar PV System as per the MNRE norms and conforming to all rules, regulations, codes, procedures as specified by Central Electricity Authority (CEA),Central Electricity Regulatory Commission(CERC),Assam Electricity Regulatory Commission (AERC) and any other authority related in this regard and all components should conform to the BIS or IEC or international specifications consisting of the following specifications- >Solar PV modules consisting of required number of crystalline PV modules conforming IEC:61215/IS:14286 & IEC:61730 Part-2. >Grid interactive Power Conditioning Unit with Remote Monitoring System.( DC Distribution Board & AC Distribution Board designed for min. ambient Temperature of 45 deg C). >Mounting structure Hot Dip Galvanized to withstand wind pressure 180 Km/hr and total load should be less than 60 Kg /sqm and minimum clearance of structure from roof level should be 300mm. >Junction Boxes made of GRP / FRP / Power Coated Aluminium with full dust,water & vermin proof . >IR / UV Protected PVC Cables, Pipes and Accessories shall meet IEC 60227 / IS 694, IEC 60502 / IS 1554 standards, Temp. range-10 deg C to +80 deg C . >Cables to be routed in GI cable tray..System Voltage -230 V / 415 V, 50 Hz. >Solar PV array- Min. 250 Wp. >Protective device against Surge. > Rated Out Put Power tolerance +/_ 3%. >Earthing and Lightening protections. >Storage Battery - 12 V , 150 AH. > Nos. of Battery- As per requirements. >Battery Backup-3 Hrs. HOSTEL BUILDING ( GIRLS INTERN)

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

M/S Assam Electric Store