GRAM TAPRANA KA MAZRA GUJJARPUR MAI RAJWAHE SE LEKAR NOSHAD KE MAKAN TAK INTERLOCKING NIRMAN KARYA.

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300,1 and 300.2 with a lead up to 1000 m as per Technical Specification Clause 301.5+S.I. No. 231(a)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upłoalead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material And (mord No. 300) ( Mechnical Means)

Brick masonry work in cement & c/c sand mortar in 1:4 substructure complete excepting pointing and plastering, as per drawing in foundation up to plinth and technical specification Clauses 602, 603, 604, 1202 & 1204 And (mord No. 600)

Plastering with cement & c/c sand mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 And (mord No. 600)

Providing concrete for plain/reinforced concrete 1:3:6 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 And (mord No. 800 & 1200) M20

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 And (mord No. 800) M25

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars. AS PER DSR 2023 S15.22.1

Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ( Mechnical Means)

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. ( Mechnical Means)

Interlocking Concrete Block Pavement (1) Providing and Laying of colour Interlocking Concrete Block Pavements having thickness 80 mmSupply of 80MM thick ISI marked I shaped Mechanically Compresed interlocking cement concrete paver blocks smooth high gloss finish skid resistant manufacture from rubber mould through vibro compression machine having plan dimension 200*(160+120mm) with minimum 5mm thick topping. The compresive strength of concrete paver block shall not be less than 30 Mpa and weight 4.50kg per no. Conforming To IS:15658-2006 including cost of Material labour T&P. Colour as per drawings and Technical Specification Clause 1504.