Construction of addl 20 Mva 132/11kv Tf plinth and allied civil worksat 132 kv ss Ropar

Dismantling cement concrete 1:5:10

Dismantling brick work tile, masonry in cement

Earth work in excavation in all kinds of soil not exceeding 2.0mtr. depth i/e dressing in bottom and sides of trenches & subsequent filling around masonary in 15cm layers with compaction including disposal of surplus soil as directed within lead of 30 metres

Shuttering for faces of concrete foundation & foundation beams & plinth Beams (vertical or Battering)

Centering and shuttering for faces of walls, parititions, retaining walls and the like (vertical or battering) including attached pilasters buttresses, etc.

Centering & Shuttering for columns (rect / square or polygonal in plain )

Centering and shuttering for sides and soffits of beam, beams,

Cement concrete 1: 6: 12 with 40 mm stone aggregate ii. Using by mechanical means using concrete mixer volumetric type

Cement concrete 1: 5: 10 with 40mm stone aggregate ii. Using by mechanical means using concrete mixer volumetric type

Cement concrete 1: 2: 4 with stone ballast or shingle ii. Using by mechanical means using concrete mixer volumetric type

Reinforced Cement Concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundatoin and plinth

Reinforced Cement Concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure

Extra for vibrator used by contractor at his own cost

Ist class burnt brick work laid in cement sand mortar 1:6 in foundation & plinth

115 mm thick brick wall in cement sand mortar 1:4 wihtout reinforcement in foudnations and plinth

Ist class burnt brick work laid in cement sand mortar 1:5 in foundation & plinth

Conglomerate floor 25 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor (1:2:4) 50mm thick

12.5 m thick Cement Plaster 1:3

12.5 m thick Cement Plaster 1:5

20 mm thick Cement Plaster 1:4

Steel work fixed independently without connecting plates including cutting, hoisting and fixing in position Rail for Transformer Plinth

Cold twisted deformed (Ribbed/ TOR steel) Bars (Fe 500 grade as per IS 1786-2008), for RCC works where not including in the complete rate of RCC including binding, bending and placing in position complete

Brick on end edging Providing and Laying brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50 metres complete as per Punjab PWD Specifications

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect, boring with 150mm .

Laying MS Strip of required size 100x12

Providing E-Rod 32 mm dia in bores

Welding by gas or by electric plant, including carriage to and from workshop etc.

Scrapping of Bricks

P& F of HCI gratings 150mmx150mm

Landing Rate of Coarse Sand including extra carriage and difference of rates

Landing Rate of Fine Sand including extra carriage

Landing Rate of Cement including extra carriage

Landing Rate of Steel including extra carriage

Landing Rate of Bricks including extra carriage and difference of rates

Landing Rate Crushed bajri 12/13.2mm including extra carriage and difference of rates

Landing Rate Crushed bajri 10/11.2mm including extra carriage and difference of rates

Landing Rate of S.Metal including extra carriage and difference of rates

Gravel spreading

PCC Flooring

Cement Slurry

Disposal of surplus soil

Fixing of templates along with fdn. Bolts as per drawing

P/f ferro trench cover of size 0.65 mt x 0.65 mt

S/F of ferro-cement trench cover 1'9"x2.6"

P & F MS angle nosing 50x50x3mm with MS flat 40x6x150mm long cleats @ 1.20 mtr c/c

P&F of various size cable racks of angle 40x40x6mm

P/F of MS cable racks of angle 40x40x5mm

Providing and fixing MS Cleats 65x65x6 mm -19 mm for T/F Plinth

Providing and Fixing Base Plate 235x220x12 mm for T/F Plinth

Providing and Fixing 12 mm dia 300 mm long bolts

Providing and fixing angle iron nozing made out of 50x50x6mm Angle iron for T/F Plinth

Recovery of Bricks

Recovery of Bricks bats