Karnataka

AOC

Works

Buildings

Polishing of Mosaic floor to Assembly Central Hall at First & second Floor, Anti termite treatment to speaker tea room & chamber, Supplying of Furnitures to Assembly secretariat offices and other allied works at First Floor of Vidhanasoudha, Bengaluru.

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹24.2 LCloses: 13 Mar 2026Closed

Timeline

Published6 Mar 2026
Closed13 Mar 2026
Awarded—

Bids

1 Bid13 Mar 2026

#	Company	Amount	Status
1	D H DAKSHANA MOORTHY ₹17.0 Laccepted-aoc	₹17.0 L	accepted-aoc

Tender Value

₹24.2 L

EMD Value

₹50,000

Closing Date

13 Mar 2026, 7:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

Polishing of Mosaic floor to Assembly Central Hall at First & second Floor, Anti termite treatment to speaker tea room & chamber, Supplying of Furnitures to Assembly secretariat offices and other allied works.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT34044

Reference Number

PWD/2025-26/BD/WORK_INDENT34044

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredAnnual turnover certificate along with UDIN

RequiredBid Capacity Calculation as per KW Document

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-2 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should be a reputed company registered as a Class IV and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-2 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

The Quoted Rates Shall be Excluding GST

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b)Satisfactory completion as prime contractor in similar workdone certificate for Civil Engineering works to an extent of 50% of the cost of the work i.e. Rs 12.09 Lakhs

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 24.19 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 2 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity calculation

Others

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

NIL

Others -- NILL

Fee & Financial Details

Tender Fee Amount

₹610

EMD Fee Amount

₹50,000

Important Dates

Last Activity

13 Mar 2026

Published

6 Mar 2026

Bid Opening

16 Mar 2026

Download Ends

7 Mar 2026

BOQ Preview

•

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle...

•

Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...

•

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexpos...

•

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

•

1. The surface to ...

•

Providing And Supplying High Back Chair genuine Leather Upholstery, White PP Seat Shell, Alu. Alloy 5 star Base, high Adjustment and Synchro tilt Mechanismi with Multi Position Locking And Automatic T...

•

Supplying medium back leather visitors chairs Eterna leather huskey colour with stainless steel handles and legs non adjustable arms without knee tilt, without gas lift, lumber support of Featherlite/...

•

Providing restoration, cleaning and diamond polishing for existing corridors, mosaic flooring of Vidhana Soudha using Klenztone, No.3 pore cleaner and polishing with diamond polishing machine with dis...

•

Supplying of Heavy Gauge visitors plastic chairs including cost of all lead & lift loading and unloading transportation & all other incidental charges.(ADR No.1305 Dated:06.08.2021, Sl.No.15)

•

Supplying and providing Visitors chairs with fixed arms with sledge base of featherlite, Godrej or equivalent make, including the cost of all materials, labour and transportation lead lift etc., as pe...

•

Supplying and placing in position designer LANNET SOFA SET (3+2+1) of fabric sarom 929 of Standard size of Durian or equivalent make complete.sofa set includes one 3 seater, one 2 seater and 1 seater ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW2 34044.doc

Tender Document • 1.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

D H DAKSHANA MOORTHY

₹17.0 Laccepted-aoc