REPAIR REPLACEMENT OF DRAINAGE SYSTEM FENCING FOOTPATH BOUNDRY WALL AND GATES UNDER AOR OF AGE BR I AT AFS CHAKERI KANPUR

Amount

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc 6.0 Mtr mean radius built in CM (1:6) complete all as specified directed

M&L for brick work with Sub class B brick straight or curved on plan exc 6.0 mtr mean radius built in CM (1:6) complete all as specified directed

Ditto all as per item No 3 above but except bricks.

Taking down cement plaster on Brick or Stone walls etc of any thickness including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster (1:4) finished even and smooth without using extra cement and applying three coats of white wash after preparation of surfaces complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surfaces finished even and smooth using extra cement complete all as specified and directed.

Dismantling mild steel Work of any description fixed in any posn not otherwise provided for complete all as specified and directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including disposal of old materials out of MD land, all as specified and directed.

Demolition of reinforced cement concrete such as roofs, floors, slab cover, beams, landing and similar suspended work, complete all as specified and directed.

Dismantling of barbed wire any type complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings c/c and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (Note : Each line wire to be measured).

S & F angle section or other steel sections for posts and struts in fencing including cutting tops to shape as directed, drilling holes noching for wires, etc; flat iron fillets including all necessary drilling, bolting, or revetting, welding and embedding in concrete etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

M & L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in posts/hold fast/benching/coping and in surface channel and drain etc. or similar work complete all as specified and directed.

M&L for earth work in excavation of all kind of soil by mechanical means/ manually in foundation trenches or drains/laying of sewage pipe or similar work (not exceeding 1.5 in width) including dressing of sides and ramming of bottoms, lift upto 1.5 including getting out the excavated soil and disposal of surplus soil out of MD land complete all as specified and directed.

Returning and filling in including spreading and leveling watering and well and ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base filling or mass concrete complete all as specified and directed.

Demolition or breaking up drain pipes 300 mm internal dia of bore (salt glazed ware AC or reinforced concrete) set in cement mortar including breaking and removal of bedding and hunching complete all as specified and directed.

S & F 300 mm bore, Reinforced concrete pipes, class NP-3, laid and jointed with cement mortar (1:2) with jute with collars, complete all as specified and directed.

M & L of PCC (1:3:6) type C2 using 40mm graded stone aggregate as in bed to drain pipes of 300 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded aggregate as in sub base to floor finished rough to receive top finishes. complete all as specified and as directed.

M & L for 40 mm mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor finished smooth without using extra cement complete all as specified and as directed.

M & L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc, of required strenth, thickness & size shape mady by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory, filling the joints with sand and cutting of pver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. (NOTE- 50 mm thick sand filling (complete thickness) shall be included in the quoted unit rate).

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of blue colour having tensile strength of 550 MP as in roof covering/Ridge/cladding to wall fixed with self tapping screw completed as specified and directed.

M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof including covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for framed MS work as in steel doors , any section as per requirement ,bearing and any other small fitting, bracket,ms plate, steel Sheet and angle section, flat section conforming to FE 410 complete all as specified and directed.

M&L for TMT bars 10 mm and over dia cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with mild steel wires (annealed not less 0.9 mm dia complete all specified and directed.

Ditto all as per item no 27 above but 5 mm dia and over up to and including 10mm dia in stirrups, spaceres and binders

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only hard drawn steel wire fabric of nominal pitch of wires 50 mm and dia of wire 3.8 mm and weight not exc 4.00 kg per Sqm complete all as specified and directed by GE.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other and fitted with washer and one hexagonal or square nut 5 to 10 mm dia, exc 5cm but not exceeding 10cm long complete all as specified and directed.

M&L for preparation of new surfaces of steel work and applying two coat of synthetic enamel paint over a coat of primer of any description not otherwise described over 10 Cm width or girth complete all as specified and directed

M&L for reinforced cement concrete M-20 Nominal mix B1 using 20mm graded stone aggregate for cover slab/slab/culvert/column/footing set in CM (1:6) including necessary form work complete all as apecified and directed.

M&L for kerb stone factory made of M-25 grade cement concrete in position to the required line at or near ground level and curvature, jointed with CM (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural groung/ brick/ concrete/RCC including taking out embedded portion and making good disturbed ground.

B.K.TRADERS

M/S ASM ENTERPRISES

m/s sahu enterprises

SHASHI CONTRACTORS

SAXENA BANDHU

M/S SDS Construction Co.

aarohi nirman company