West Bengal Sdc

Financial Eval

Works

ELECTRICAL WORKS ORG

Replacement of damaged cable of Tramline building

Public Works Department

Alipore | Kolkata, West Bengal

Amount: Refer DocsCloses: 10 Aug 2026Closed

Timeline

Published30 Jul 2026
Closed10 Aug 2026
Technical Evaluation1 Sept 2026
Financial Evaluation9 Sept 2026
Award—

Bids

Item Rate

3 Bids9 Sept 2026

#	Company	Amount	Rank	Status
1	ALPHA ELECTRICALS L1₹2.8 LAccepted-Finance 24C GOABAGAN LANE KOLKATA 700 006 \| KOLKATA \| KOLKATA \| WEST BENGAL \| 700006	₹2.8 L	L1	Accepted-Finance LOWEST BIDDER
2	S. A. ENTERPRISE L2₹2.9 L+₹12,979 (4.66%)Rejected-Finance 3 C DR JAGABANDHU LANE KOLKATA 700012 \| KOLKATA \| KOLKATA \| WEST BENGAL \| 700012	₹2.9 L+₹12,979 (4.66%)	L2	Rejected-Finance SECOND LOWEST BIDDER
3	FAME ENGINEERING L3₹3.0 L+₹20,342 (7.30%)Rejected-Finance 31 1 6 SEBADAL ROAD UDAYPUR NIMTA KOLKATA 49 \| 24 PARAGANAS NORTH \| WEST BENGAL \| 700049	₹3.0 L+₹20,342 (7.30%)	L3	Rejected-Finance THIRD LOWEST BIDDER

BoQ Comparative

Line Items (12)

Sl No	Description	Qty	Unit	ALPHA ELECTRICALS L1	S. A. ENTERPRISE L2	FAME ENGINEERING L3
1.00Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1.10	4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]	1	nos	13,875 ₹13,875 Lowest	14,500 ₹14,500	14,750 ₹14,750
2.00Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
2.10	125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]	1	nos	10,500 ₹10,500 Lowest	12,580 ₹12,580	12,500 ₹12,500
3.00Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]
3.10	63 Amps TP MCB [ 7 / D- 6]	4	nos	1,950 ₹7,800 Lowest	2,100 ₹8,400	2,500 ₹10,000
4.00	Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]	1	no	1,550 ₹1,550 Lowest	1,580 ₹1,580	1,650 ₹1,650
5.00Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]
5.10	125A	1	Set	18,500 ₹18,500	16,950 ₹16,950 Lowest	17,000 ₹17,000
6.00Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Tender Value

Refer Docs

EMD Value

₹5,744

Closing Date

10 Aug 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Assistant Engineer,PWD

Address

New Office Complex Building 4th Floor, Bhabani Bhawan Alipore, Kolkata

Work Description

Replacement of damaged sub main cable of Tramline building in Judges court Campus, Kolkata-27

Tender Information

Tender ID

2026_WBPWD_5017638_1

Reference Number

WBPWD/AE/AESD/eNIQ-10 of 2026-27

Tender Type

Open Tender

Product Category

ELECTRICAL WORKS ORG

Form of Contract

Item Rate

Period of Work

7 days

Location

Alipore

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredNIQ (.pdf)

RequiredFORM (.pdf)

RequiredEMD,VOTER ID/Aadhar, PAN (.pdf)

RequiredLatest PT Challan , GST Registration, Trade License, License to Electrical Contractor, SCC (.pdf)

RequiredLatest IT Acknowledgement, Work Credentials, Company details (.pdf)

RequiredAffidavit- Y , Pre-qualification application (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹5,744

Important Dates

Last Activity

9 Sept 2026

Published

30 Jul 2026

Bid Opening

12 Aug 2026

Download Starts

30 Jul 2026

Download Ends

10 Aug 2026

Submission Starts

3 Aug 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (9 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1.1	4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]	-	nos	-	-
2Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
2.1	125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]	-	nos	-	-
3Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]
3.1	63 Amps TP MCB [ 7 / D- 6]	-	nos	-	-
4Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]
5Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]
5.1	125A	-	Set	-	-
6Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.56 MB

Tendernotice_2.pdf

PDF • 0.51 MB

Work Item Documents

BOQ_5087961.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ALPHA ELECTRICALS

L1₹2.8 LAccepted-Finance

24C GOABAGAN LANE KOLKATA 700 006 | KOLKATA | KOLKATA | WEST BENGAL | 700006

S. A. ENTERPRISE

L2₹2.9 L+₹12,979 (4.66%)Rejected-Finance

3 C DR JAGABANDHU LANE KOLKATA 700012 | KOLKATA | KOLKATA | WEST BENGAL | 700012

FAME ENGINEERING

L3₹3.0 L+₹20,342 (7.30%)Rejected-Finance

31 1 6 SEBADAL ROAD UDAYPUR NIMTA KOLKATA 49 | 24 PARAGANAS NORTH | WEST BENGAL | 700049

Sl No	Description	Qty	Unit	ALPHA ELECTRICALS L1	S. A. ENTERPRISE L2	FAME ENGINEERING L3
1.00Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1.10	4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]	1	nos	13,875 ₹13,875 Lowest	14,500 ₹14,500	14,750 ₹14,750
2.00Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
2.10	125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]	1	nos	10,500 ₹10,500 Lowest	12,580 ₹12,580	12,500 ₹12,500
3.00Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]
3.10	63 Amps TP MCB [ 7 / D- 6]	4	nos	1,950 ₹7,800 Lowest	2,100 ₹8,400	2,500 ₹10,000
4.00	Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]	1	no	1,550 ₹1,550 Lowest	1,580 ₹1,580	1,650 ₹1,650
5.00Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]
5.10	125A	1	Set	18,500 ₹18,500	16,950 ₹16,950 Lowest	17,000 ₹17,000
6.00Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Sl No

Description

Qty

Unit

ALPHA ELECTRICALS

S. A. ENTERPRISE

FAME ENGINEERING

1.00Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

1.10

4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]

nos

13,875

₹13,875

Lowest

14,500

₹14,500

14,750

₹14,750

2.00Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

2.10

125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]

nos

10,500

₹10,500

Lowest

12,580

₹12,580

12,500

₹12,500

3.00Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]

3.10

63 Amps TP MCB [ 7 / D- 6]

nos

1,950

₹7,800

Lowest

2,100

₹8,400

2,500

₹10,000

4.00

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]

1,550

₹1,550

Lowest

1,580

₹1,580

1,650

₹1,650

5.00Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]

5.10

125A

Set

18,500

₹18,500

16,950

₹16,950

Lowest

17,000

₹17,000

6.00Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1.1	4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]	-	nos	-	-
2Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
2.1	125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]	-	nos	-	-
3Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]
3.1	63 Amps TP MCB [ 7 / D- 6]	-	nos	-	-
4Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]
5Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]
5.1	125A	-	Set	-	-
6Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

1.1

4 way (4 + 12), Double door (make as approved by E.I.C ) [14/ 2.5.1]

nos

2Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

2.1

125 A,36KA,FPMCCB (make as approved by E.I.C ) [13/ 2.2.14]

nos

3Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS [ (Make: Legrand/L&T/ Seimens as approved by E.I.C ]

3.1

63 Amps TP MCB [ 7 / D- 6]

nos

4Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required[17/ 2.25]

5Supply and fixing415 V TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it (Siemens/ L &T/Havells) of different sizes [ 4(a)/D-3 ]

5.1

125A

Set

6Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.