PROVN OF APPROACH PATH FOR CERTAIN MD ACCN IN AJMER LINE AND PROVN OF HARDSTANDING AT FIELD WKSP COMPANY UNDER THE AREA OF AGE B/R-I OF GE (ARMY) No 1 JODHPUR.

Surface excavation not exceeding 30 cm deep and averging 15 cm deep and getting out in any type of soil complete all as specified and as directed

M&L for Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for hard core of broken stone or boulder gauge not exceeding 63mm deposited, spread & leveled in layers not exceeding 15cm thick, watered and rammed to a true surface etc complete all as specified& directed.

M&L for 100 mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in sub base of path, hardstanding and flooring complete all as specified & directed by Engineer-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and directed. Note. Size & shape of kerb stone as directed by Engineer-in-Charge.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with aproved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified& directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in any thickness, size or shape including pilasters, buttresses, coping,etc and the like edge slightly rounded or chamfered and GI posts including neccessary use and waste form work complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out & removing surplus soil material to a distance not exceeding 50 mtr & and making good surfaces in any type of hard & dense soil complete all as specified and directed.