S/R TO STREET LIGHT IN THE CAMPUS OF GOVT. POLYTECHNIC FOR WOMEN AT SIRSA

Amount

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17). Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

iii) SPN MCB 6 amp. To 32 amp.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). xii) Galvanized iron pipe 40 mm dia on flushed.

Earthing (HSR 31.22): i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

Under Ground Cables: Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches.Make: Havell's/ RR Kabel/ KEI/Polycab. (HSR 31.25). xl) 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Make: Havell's/ RR Kabel/ KEI/Polycab. (HSR 31.26). v) 16 Sq. mm 2 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28). ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Street Light. (HSR 31.30): IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40). i) Cable size 1.5 sq.mm(3/ 0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (HSR 31.41). i) 4-way, SP&N (Horizontal)

S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48).

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.67). ii) HDPE pipe 63/50 mm outer dia / inner dia

Supply and erection of Hot Dip Galvanized octagonal pole 3 thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.(Phillips/G.E/vipin ST Poles) (HSR 31.68). i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

Non Schedule items: Main Switch Cum-Padestal- cum- Distribution board.Supply/ errection/ testing / commissioning of timelight distribution board 65 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 no. 63 amp TPN MCB, 1 no. 65 amp contactor, 1 HRC fuse , 1 No. Rotray Switch, 1 No. 16 amp fuse base, 1 No. Timer switch and 1 Indicator having IP 52/56 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work.(Make:- IndoAsian/ Havell's/ Standard).

Non Schedule items: S/E of 150 W LED Flood light luminaries with high power LED Minimum 110 lumens per watt Luminaries with secondary optics made in pressure die cast aluminum housing and Heat sink in aluminum extrusion with IP-65/66 with front toughened glass including the all petty material & labour for errection, complete in all respect of upto the entire satisfaction of the Engineer-in-Charge of the work. Make: Philps/ Havell's/ Crompton/ Surya/ Bajaj. .

Non Schedule items: Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

Non Schedule items: S/E of 60 W LED street light fitting warm white < 100 Lumens per Watt Philips / Havell's / Crompton/ Bajaj/ Surya make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule items: Executiion /Trench less digging for Laying of G.I. pipe 32/50 mm dia 1 M below ground level in RCC/ Pakka Road for laying of cable including all labour and petty material etc. required to complete in all respect upto the entire satisfaction of Engineer-incharge of the work.

J.B.S.Electrical Co.

M/S NATWADIA ELECTRICAL COMPANY