WELCOME MAINT AND MISC BR WORKS AT OLD NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in 1:2:4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts

M & L MS works in holdfast made of Fe -290 of any length

S & F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S&F 100mm size stainless steel medium weight butt hinges all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises

M &L screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying tiles complete all as specified and directed

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area, of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L 10mm thick backing layer in CM 1:4 all as specified

S&F Glazed coloured ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified

Demolition of lime/ cement Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 type F2 using 40mm graded stone coarse aggregate in sunken floor all as specified and directed.

Supply only integral water proofing compound of ISI make.

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water & removing debrises out side MD land.

M&L Plastering on concrete surfaces of beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)

M & L Applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height all as specified and directed. Make :- Pidilite fosroc or equivalent

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.

M & L sagol finish on old & new plastered surfaces to a thickness not less than 1.00 mm trowelled to an even & smooth surfaces

All as per item No 24.00 above but 10mm thick in CM (1:3) in ceiling

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash

M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer all as specified and as directed

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

M&L applying one coat of white wash on old plastered surfaces including preparation of surfaces as in wall all as specified.

All as per item No 30.00 above but on ceiling.

M&L applying one coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified.

M&L applying two coats of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified.

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, all as speciifed and directed

S & F in repairs Stainless steel sink coupling of external dia 0.11 m

Refixing wash basin on existing brackets any size including cutting for and pinning in ends of brackets or erecting stand .

Demolition of brick work built cement mortar.

M&L brick work with sub class `B' bricks (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified

M&L applying two coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified

Hacking out broken glass panes of any description from wooden frames fixed with beads.

S&F 4mm thick sheet glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

Resecuring or easing & adjusting, without taking down shutters exc 1 sq. m and n exc 2 sq. m each

Resecuring or easing & adjusting, without taking down shutters upto 1 sq. m each

Taking down shutters exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening

Taking down shutters n. exc 1 sq. m each and refixing in the same opening

S&F 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs.

All as per item No 49.00 above but 100 mm.

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

All as per item No 51.00 above but 100 mm.

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

S & F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets

S&F CP brass pillar tap 15mm, screwed down high pressure fancy type.

S & F 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms)

S & F pvc connectors of 15 mm size with PTMT nuts of length 600 mm.

S & F PVC waste pipe of 32 mm dia 800 mm length

S & Fin repairs PVC waste pipe of 32 mm dia 800 mm length

S & F in repairs CP grating of size 100 mm

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F 30 MM thk Flush shutters, solid core construction, with particle board core, both face is covered with decorative face veneer with lipping/frame to match all as specified

M&L applying two coats of synthetic enamel paint over a coat of primer including preparation of wooden surfaces over 10cm width/girth all as specified.

S & F Aluminium, anodised, barrel tower bolts of extruded section 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S & F SS butt hinges 100 mm size

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

M&L for powder coatd aluminium serrated finish 20/25mm dia curtain rod fixed with sheet metal C/P screws rovel plugs complete all as specifed and dire2cted.

S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed (Make : as approved by GE)

Dismantling Plain or corrugated FRP CGI /GI chajja any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. (a) The flashing, caping, as required will be factory manufactured in required shape out of same material as of roof sheeting and fixed by means of self drilling screws. (b) The payment will be done on the actual finished/covered surface area of the sheet. No separate payment will be made for the lap of sheet and accessories, bolts, nuts, washers, adjustable bolts, ridges, supports for gutters and other fixtures. These are deemed to be included in the quoted rates. (c) The galvalume sheets shall be fixed in isolated locations as in chajjas of width not more than 900 mm.

Dismantling wrought iron or mild steel work of any description not otherwise provided for embedded in PCC / brick work all as specified and directed.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., confirming to Fe 290 Gde E-165.

S&F rolled section as in main & cross beam , hip and jack rafter purlins where connected to common rafter and running rails etc complete using Fe-410-0 or Fe-310-0

M&L applying two coats of synthetic enamel paint over a coat red oxide primer on steel newly surfaces over 10cm width/girth incl preparation of surfaces.

S & F 10mm dia 100 mm long dash through fastners bolts in concrete and brick work.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm girth & not but not exc 20 cm girth

M&L for filleting in any position and to any shape of section area n.exc 25 Sqcm in cement sand mortar 1:4 including all mitres, stops, etc.

Taking down carefully copper/ aluminium point wiring i.e. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.

M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switches & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin switch socket combination 5 Amps on the same board with other switches.

One 3 pin switch socket combination 5 Amps, independent.

One bell point controlled by one push button

All as per item No 83.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.

S & F in replacement with modular switch, 1 module, single pole one way 6Amp.

S & F in replacement with modular switch, 1 module, single pole one way 16Amp.

S & F in replacement with ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm

S & F in replacement with modular socket 2/3 pin, 2 module, 6A.

S & F in replacement with Socket 6/16A, 6 pin, 2 module.

S & F in replacement with modular bell push switch, 1 module, single pole one way 6Amp.

S & F in replacement with modular electric bell ding dong, AC, 230V single pole.

S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way.

S & F in replacement with lamp holder, Angle/Batten, PVC/Polycarbonate body with 7 W LED Lamp.

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F modular PVC Gang box, screwless, with silver border of 8 module for mounting of modular switches and sockets including blank plate for blank module.

All as per Item No 94.00 above but of modular PVC Gang box, 6 module.

All as per Item No 94.00 above but of modular PVC Gang box, 3 module.

All as per Item No 94.00 above but of modular PVC Gang box, 2 module.

All as per Item No 94.00 above but of modular PVC Gang box, 1 module.

S&F modular white cover plate with frame, 8 module.

S&F modular white cover plate with frame, 6 module.

S&F modular white cover plate with frame, 3 module.

S&F modular white cover plate with frame, 2 module.

S&F modular white cover plate with frame, 1 module.

Taking down unserviceable FTL and supply and fix Slim LED integrated batten of 20Watt 4ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose complete. Make of Light Fitting : Wipro Cat Part No D53206520 watts or BN 021C LED 20S PSU CDL GR of Philips F9 or BCLSB20W WH LED of Bajaj

All as per Item No 104.00 above but Slim LED integrated batten of 10 Watt 2ft complete. Make of Light Fitting : Wipro Cat Part No D53106520 Watts or BN021 LED 10S 6500 PSU GRS1 of Philips or BCLSB10WH LED of Bajaj

P LAXMI AND CO.

ASHOK CONSTRUCTION

Sahi Sagar Enetrprises

BOB ENTERPRISES

ORIENT ELECTRIC CO