SPECIAL REPAIRS TO RETINUE STAFF ROOM AT STAFF HOUSE AND EXTERNAL AREA AND ADDITION ALTERATION TO BUILDING NO

Amount

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed (WPC shall be mesured and paid seperately) incl all necessary scaffolding etc complete.

Preparation of new plastered surfaces of walls/Ceiling and applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer incl all necessary scaffolding etc complete all as specified and directed.

S& F for PERGO wooden flooring with skirting in dado including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:2:4 (20mm graded stone aggregate) as in flooring finished with even and fair without using extra cement incl necessary formwork and demolition of old concrete

M & L for 10mm thick digital coloured light shade double charge vitrified tiles of size (square/ rectangular) polished area of each tiles n.exeeding 0.36 sqm in floor etc, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed by Engr-in-charge.

M&L for framed work as in door shutters with gusset plates, braces, etc., to be prepared for hanging or sliding with and including eitherr hooks and hinges or steel hanging door fittings and fixing in repairs (exclusive of steel sheeting) complete all as specified and directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamvered, put together with glue pinned at joints in repairs

M&L for 12 mm thick plywood, grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges, including dismantling existing old boarding of any description fixed in any positions with nails in repairs

M&L for 18 mm thick plywood, grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges, including dismantling existing old boarding of any description fixed in any positions with nails in repairs

M&L for Preparation of new or previously untreated surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of pink primer and two coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M & L M-25 Reincorced Cement Concrete (20mm garded stone aggregates) in Slabs/Ramps supported on walls, beams and columns in floors, landings, deck slabs and in shelves and the like etc complete including necessary formwork all as specified and directed

M & L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip etc complete.

S&F in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed with and including Ilnd class hard wood beading complete as specified and directed .

S&F 8mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed

Preparation of new plastered or unplastered surfaces and apply two coat of oil bound distemper on wall over a coat of primer all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in repair, complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base

M&L for heavy duty cement concrete interlocking paver tiles 80 mm thick having glossy finish with gray cement and no pigment (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 25 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation by means of surface vibrator, complete all as manifacture instructions specified and directed.

M & L for Metal frame suspended 12.5mm thick gypsum false ceiling including metal perimeter channel of size 0.50mm thick(having one flange of 20mm and another of 30mm and web of 27mm) along with the perimeter of ceiling, screw fix to block/brickwall/partition with the help of nylon sleeves then suspending with metal intermediate channel of size .80mm thick with two equal flanges each 15mm from the sofit at 900mm c/c with help of sofit cleats and Rawl plug

M&L for Polished granite stone slab 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture pigment to match with shade of granite including moulding at front edge incl demolition of old stone slabs all as specified and as directed as in platforms Note : Quality of granite all as approved by GE .

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish out off the premises (outside MD land)

Dismantling boarding(wooden flooring), any description, fixed in any position and removing debris outside MD land as per directed by EIC.

M & L coloured Virified tiles of Dark Shade/Double charged/ ultracharged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid on vertical surfaces such as Dado/Skirting including cement mortar screed bed of 20mm thk in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified & directed by EIC (Note - Pattern, Finishing, Shade, Colour as approved by GE)

M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering in cement mortar 1:4, 15mm thick on fair face of brick work as backing coat for fixing tiles in vertical surfaces.

M&L for Non Skid rectified ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set laid in flooring with 15mm screed bed in cm 1:4 including levelling the floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directedthe following situations. Make:- Somany,Orient bell & Kajaria.

Taking down existing cement plaster on brick wall/ceiling including raking out joints, hacing for key, scrubbing down with water, etc. complete all as specified and directed.

Rendering, 15 mm thick cement plaster 1:4 on brick work/concrete surface finished even and smooth with out using extra cement.

Rendering, 10 mm thick cement plaster 1:3 on brick work/concrete surface finished even and smooth with out using extra cement on ceiling.

Preparation of new plastered or unplastered surface by applying 3mm thick wall care putty on wall & Priming plastered and other surfaces with alkali- resistant primer on wall etc complete all as specified and directed

Preparation of new plastered or unplastered surface by applying 3mm thick wall careputty & Priming plastered and other surfaces with alkali- resistant primer on ceiling etc complete all as specified and directed

Taking down chowakts or frames (without taking off shutters from the frame) exc 1.5sqm and n.exc 4 sqm each etc complete all as specified and as directed .

M&L powder coated Aluminium frame (minimum thickness of powder coating 50 micron) doors, sliding windows & ventilators (moveable louvers type) with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, . complete all as specified.

M & L for powder coated Anodised aluminium window and ventilator shutters, (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 5.5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.

S & F 35mm thk flush shutter, solid core construction, with block board core and plywood face pannel, commercial type on both sides.

M & L .9mm thk Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction

S & F Brass, sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F Brass, sliding door bolt 200 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F Brass barrel tower bolt with barrel of extruded section 150mm long.

S & F 150mm long extruded Brass handle fabricated type polished.

S & F 100mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-1

S & F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed of Aluminium (extruded) Section

Preparation of old painted wooden surfaces over 10cm width or girth and applying two coat of synthetic enamel paint all as specified and as directed.

S&F for rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position all as specified capacity 3000 ltrs.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills and cutting chases for concealed water tubing or concealed conduit wiring, etc and making goood cutting exceeding 20 cm girth

S&F in repairs CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. Make - Jaquar

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed Make - Jaquar

S & F in repairs stop valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore. Make - Jaquar

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,Make - Jaquar

S&F in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified.Make - Jaquar

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed. Make - Jaquar

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets. Make ; Hindware, Commander

S & F Urinal bowl type or half stall pattern basin only including cinnection to flush pipe and out going pipes fixed in repairs

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F roof tiles, Mangalore pattern, interlocking at side joints, laid dry

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on wooden works with two or more coat all as directed and specified.

Supply & Fixing 12mm thick tinted and polished toughened glass for door & fixed with ething including aluminium framing, door handle, suitable hinges, rubber beading, floor spiring and all necessary fittings as per directed by Engineer - in- Charge including taking down existing glass door and fixing of glass and removed devris away MOD land

Preparation of new plastered surfaces of walls/Ceiling and applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer complete all as specified and directed. incl all necessary scaffolding etc.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

Supply and fix in repair Modular Switch, 6Amp, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular blank plate, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular type bell push , 6Amp, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Bell electric AC 230Volt single pole musical type with ISI mark. Make - Legrand /Gold Medal / Anchor

Supply and fix in repair Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified. Make - Legrand /Gold Medal / Anchor

Supply and fix in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

M & L required for filling wall cavity & cutting chases in cement mortar 1:3 not exc 10 cm in girth to ends or edges including taking down existing metal or wooden sinking box & making good to wall surface for concealed modular metal flush box or concealed conduit wiring, etc

Supply and fix in repair Modular white cover plate with Frame 1 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 2 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 3 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 4 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 6 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 8 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 12 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 3 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 4 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 6 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 8 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 12 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Linear Aluminium Baten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Make- SHAKTI CAT PART No. SZSLAMX020 or Philips / Havells/ Jaquar or equivalent

Supply and fix in repair Linear Aluminium Baten LED T/L 10W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Make- SHAKTI CAT PART No. SZSLAMX010 or Philips / Havells/ Jaquar or equivalent

Supply and fix in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply. Make- Philips / Havells/ Jaquar or equivalent

Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge. Make- Anchor / Havells/ Legrand

Supply and fix in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners. Make - Legrand/ Schneider/ GE

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduits of suitable size not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note : 2 runs of 10 Sqmm cable, 1 run of PVC conduit and 1 run of 10 Sqmm cable shall be measured as 1 Run. Make of wire- Finolex, Polycab, Havells Make of conduit- Preesfit, Precision, Prayag

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc.

S&F 12 way Double door type having protrection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make- Havells/ Philips/ Legrand

S & F MCB SPN 63 Amps, 240 Volts, C Series . Make Legrand Model No 408620./Havells/Philipse

S & F MCB SP 6-32 Amps, 240 Volts, C Series . Make Legrand Model No 408595/Havells/Philipse

Supply and fix in repair single phase sheet metal powder coated double door distribution board 4 way complete all as specified and directed. (a) MCB SPN 40Amps 240Volts, 10KA - 1 No ('C' Series) (b) MCB SP 6 - 32Amps 240Volts - 2No ('C' Series) Make Legrand Model No 408618./Havells/Philipse

S & F telephone jack with pressed steel sunken box with 3 mm thick PVC top cover complete Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

ORIENT ELECTRIC CO

ASHOK CONSTRUCTION

SHRI SAI ENTERPRISES

BOB ENTERPRISES

SHREE JAGDISH FURNITURE CO.