Provn of covered shed behind AC store at MO (PBR) , Provn of certain B/R works and connected items to Bldg No T-72 at Jal Vihar, Provn of tiling and connected works in Bldg No. P-144/3 at Jal Vihar under GE Haddo, Sri Vijaya Puram

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and directed.

Returning filling in incl spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soil complete all as specified and directed.

Removal of surplus soil to a distance exc. 1.5 km but n. exc 5.0 km and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (20mm aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 complete all as specified and directed.

M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surfaces mixed with liquid water proofing admixture (as per manufactures instructions) all as specified finished even and smooth without using extra cement. (Note: LWPA will be measured and paid seperately) complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:6 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over a coat of primer. complete all as specified and directed.

Material & Labour for preparing newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as specified and directed.

Supply only liquid integral water proofing compound

M&L for cement concete 1:2:4 type B1 using 20 mm graded stone aggregate as in bands, seismic and other similar bands incl. weathering slightly rounded or chamfered angles and throating as directed incl. necessary formwork. complete all as specified and directed.

S & F of 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone as Sub Base complete all as specified and directed.

M & L for 50mm cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing cement concrete even and smooth without using extra cement complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. complete all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws in semi circular/ curved shape all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L plain anodised aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed

M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

M&L for 20mm thick plaster on RCC roof slab in CM 1:4 including water proofing compound @ 3% by weight of cement complete all as specified (Note : WPC shall be measured and paid seperately)

Supply only liquid water proofing compound

M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturer's instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 2mm thick wall care putty to make the surface smooth complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of one coat of primer over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc .011 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed.

Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :- Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section, in fillets, rails, posts, rafters, purlins, etc. in any position complete all as specified and directed

S&F for 1st class hard wood 35 mm wrought treads with rounded nosings, with 20 mm wrought risers on tongued both edges, glued, wedged and blocked complete all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified

M&L for applying a bonding slurry coat on the wall and ceiling surface up to depth of 20 mm using Nito Bond AR manufactured by M/s Fosroc Chemicals India (P) Ltd / equivalent in Dr. Fixt or Harjas Coating & Polymers (Coverag of 4 to 5Sqm / Ltrs) all as per manufacturer's instructions.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in levelling course to receive top layer complete all as specified

M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed

M&L 14-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed

S&F vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified

S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed

S&F vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified

S&F PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongrycomplete all as specified and directed

S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified

Cutting chases in stone, concrete block or slab walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

S&F 75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed

Surface excavation n. exc 30 cm deep and averaging 15 cm deep in any type of soil and getting out complete all as specified and directed

M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed

S&F chromium plated brass towel ring round Make Jaquar AQN -7721 or equivalent model in Parryware / Prayag / Hindware

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed Makte : Jaguar Cat Part No ALD-CHR-573 or equivalent in Parryware/Hindware/Prayag

S&F bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat Part No CON-CHR-107KN or equivalent in Parryware/Hindware/Prayag

S&F 15mm dia brass chromium plated two bay bib tap fancy type with wall flange complete all as specified Make : Jaquar Cat Part No ALI-CHR-85041 or equivalent in Parryware/Hindware/Prayag

S&F WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed Make : Parryware/ Prayag / Hindware

S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat Part No CON-CHR-053KN or equivalent in Parryware/Hindware /Prayag

S&F chromium plated brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg and wall flange complete all as directed Make : Parryware/ Prayag / Hindware

S&F PVC corner glass shelf 300mm size with bracket complete all as specified

S&F chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified Make : Jaquar Cat Part No : ACN-CHR-1131N or equivalent in Parryware/Prayag/Hindware

S&F chromium plated brass toilet paper holder Make : Jaquar Cat Part No : ACN-CHR-1153S or equivalent model in Parryware/Prayag/Gem

S&F chromium plated brass shower roses with or without swivel joints square type 125mm size including shower arm complete all as specified Make : Parryware/Hindware /Prayag

S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed Make : Jaquar Cat Part No AQN-CHR-7711 or equivalent in Parryware/Hindware /Prayag

S&F PTMT cabinet mirror of size not less than 500mm x 400mm x 100mm openable mirror shutter with suitable built-in racks complete all as specified and directed Make : Prayag Cat Part No 556 or equivalent in Supreme/Nilkamal

S&F 0.63mm thick SS sheet stainless steel kitchen plate rack of size 36'' x 30'' x 10'' standard quality complete all as specified and as directed Make : Blue star, Prayag or equivalent

S&F 100mm size stainless steel butt hinges medium weight complete all as specified

M&L for 18mm thick HDF boarding (Fire and water proof) as in cup boards/shutters/racks/shelves exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed

S&F stainless steel hydraulic pump 150mm long and 15mm dia complete all as specified. Make : Hettich/Harrison/Dorsel

S&F stainless steel non megnetic bow handle "D" type anodized 150mm long complete all as specified. Make : Hettich/Harrison/Godrej

S&F telescopic ball bearing runners minimum length 400mm (KA 5632) full extension load capacity 45 Kg complete all as specified. Make : Godrej/Hettich/Kaff

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete all as specified. Make : Hettich/Kaff/Godrej/Kich

S&F stainless steel auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. Make : Hettich/Harrison/Godrej

S&F Stainless Steel 304 grade wire basket of pull out type like cup and saucer / bottle / multi purpose / 2-3 shelf baskets etc for kitchen of required size complete all as specified and directed

S&F 75mm size stainless steel butt hinges medium weight complete all as specified

S&F 75mm size hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / on surface as possible PVC conduits (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/ yellow /blue, neutral- black and earth green all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for modular fittings like cover plate with frame and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete for one light/fan point all as specified and directed. Make: Gloster /Havells/ Anchor/ Polycab /Finolex

Description same as per Srl item No 91 above but One fan point controlled by one switch 5 Amps one way complete all as specified and directed.

Description same as per Srl item No 91 above but, point wiring for 3 pin switch socket outlet , 6 Amps on independent board complete all as specified and directed.

Description same as per Srl item No 91 above but, poi t wiring for 3 pin switch socket outlet , 6 Amps on same board complete all as specified and directed.

All as per item No.91 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket out let on independent board complete all as specified and directed.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal complete all as specified and directed.

S & F Switch modular type , single pole one way 16 amps complete all as specified and directed.

S & F stepped type electronic fan regulator modular type complete all as specified and directed.

S & F and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/Philips Havells

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed by Engr In charge. Make: CG Model No : Usha model No. TECHNIX or equivalent to CG / Havells / Orient.

Supply & fixing Wall mounting fan 400 mm sweeep incl all fixing arrangement complete all as specified and directed Make:CG Model No : FHWPCPTWHY16 or equivalent to Eva/ Havells/ Usha/ Orient

Supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light complete all as specified and directed.

S& F 30 watts LED building security light fittings win peanuts leans IR 65 luminaire comprise of elegantly designed COB LED ensure efficient optics and uniform distribution of light for street light application. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessaryt fixing arrangements as per site requirements class Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells

S & F Sub main wiring with PVC insulated cable 2 runs single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduit concealed/ on surface on wall (ISI marked) incl suitable size all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity complete all as specified and directed. Note : 3 runs of cable and one run of PVC conduit shall be measured as one unit.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 6 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed.

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . Note for item No.105 &106 :- Termination of all wiring in to MCBs/ MCCBs/DBs shall be through copper lugs/ thimbles of adequate capacity.

Supply, laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 16 Sqmm 2 core (laid on floor/Roof/wall in proper saddling all as specified and directed.

Supply and laying/fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 40 mm(OD) x 32 mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 451 & 452 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

NAWAZ CONSTRUCTIONS (BID ID -3273184)

V KARTHICK (BID ID -3275105)

CHANDER SEKER ENTERPRISE (BID ID -3273557)

LOOK UP ENTERPRISES (BID ID -3275000)

M/S AMK CONSTRUCTIONS (BID ID -3274689)

JD Construction (BID ID -3274965)

Sree Tirumala Enterprises (BID ID -3274600)