construction of minor bridge and approach road of 4x5x3-5 mtr span of bichhand pahadpur road sarra nala from sarra chiloli road road in fy 25-26

Construction of Embankment with Material obtained from Borrow pits with all lift and leads, transporting to site, spreading to requred slope and compacting to meat requirement etc as per MORD clause 300.1 And 300.2 with a lead upto 2000m as per technical specification clause 301.5. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supply of Laying Hume Pipe 1000 mm Dia I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick soling with straight overburnt bricks on edge including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labours, T&P etc. required for proper completion of work. As per SOR Ch- 20 762 (b) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). I/C cost of material, labour, T&P and all Taxes but Excluding GST

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. As per Morth Specification No.-15.01, 304(B) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (M-10) As Morth Specification 2100 sr no 12.04 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700 & 2100 Sr 12.08 (R.C.C. Grade M-25) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications 1500, 1700 & 2200 sr no. 13.05. (RCC Grade M-25) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Plain/Reinforced cement concrete in super-structure complete as per drawing and Technical Specifications 1500, 1700 & 2200 sr no. 13.05. (RCC Grade M-30) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete asper Drawing and Technical Specifications. As per Morth Specification 12.42 S.I. 1600 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications. As per Morth Specification 1600& 2200 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Supplying, fitting and placing HYSD bar reinforcement in Super-structure complete as per drawing and Technical Specifications. As per Morth Specification 1600& 2200 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. As per MORTH Specification 2702, S.I. 14.04 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and laying Pitching Launcdhing appron prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Back Filling behind abutment, wing Wall & Return wall Complet as per Drawing and Technical Specification. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and laying filter media undermeath pitching in slopes completer as drawing and technical specification cl. 1302 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Type - A, "W": Metal Beam Crash Barrier Providing and erecting a "w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150×75×5 mm spaced 2 m centre to centre, 1.8 m high. 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and 18:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150×75×5 mm, 330 mm long complete as per clause 810 As per SOR Ch- 27 SI No.27, 810 (8.23) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Construction of Embankment with Material obtained from Borrow pits with all lift and leads, transporting to site, spreading to requred slope and compacting to meat requirement etc as per MORD clause 300.1 And 300.2 with a lead upto 2000m as per technical specification clause 301.5. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Granular Sub-base with Coarse Graded Material (Table 400.2) By Mix in Place Method :- Costruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Water Bound Macadam Sub-base/Base W B M Grade-2 Providing Laying Spreading and Compacting Stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 2 as per Technical Clause 405(2) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Water Bound Macadam Sub-base/Base W B M Grade-3 Providing, laying, spreading and compacting stone aggregates of 22.4-53mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 2 as per Technical Clause 405(3) I/C cost of material, labour, T&P and all Taxes but Excluding GST

Primer Coat :- Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 Kg/sqm using mechincal means as per Technical Specification Clause 502 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Tack coat :- Providing and applying Tack coat with bitumen VG-10 using Bitumen distributor at the rate of 0.35 kg per sqm on Bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 I/C cost of material, labour, T&P and all Taxes but Excluding GST

20 mm thick Open-Graded Premix Carpet using Bituminous Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type-C as per Technical Specification Clause 508. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Seal Coat :- Providing, laying seal coat sealing the voids in a bitumenious surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. I/C cost of material, labour, T&P and all Taxes but Excluding GST