SPL REPAIR TO BLDG NO T-8 AND T-29 (RECREATION HALL) OF 54 COY ASC (SUP) AND PROVN OF RO PLANT SYSTEM NEAR BLDG NO P-116 PH-I (OPD COMPLEX) OF MH AND CERTAIN MW WORKS IN THE AREA OF AGE B/R-II UNDER GE (WEST) JABALPUR

Amount

Taking down chowkats or frames of size eexc 1.5 Sqm but n.exc 4.00 sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) of size n.exc 1.5 Sqm each (steel window/Ventilator ) and removing from site complete all as specified and as directed.

Taking Down Steel Rolling Shutter with frame of size exc 4.0 sqm but n exc 9.0 sqm each,complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and as directed.

M & L for taking down of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Dismantling of floor hearth or wall tilling,cement concrete tile, terrazzo tiles, including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for Hardcore of gauge exc. 63 mm but n exc.100 mm of broken bricks, deposited spreaded and levelled in layer n exc. 15 cm thick water and rolled to a true surface complete all as specified and as directed

S&F for Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified and as directed.

S&F for 35 mm factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed

M&L for 35 mm thick 2nd class hard wood glazed/gaused and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed.

S&F for Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

M&L for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

M&L for 150 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth including preparation complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces of any description not otherwise described over 10 cm width or girth including preparation complete all as specified and as directed.

S&F for aluminium powder coated window sliding type (3 track) with frame size 100x35x1.5mm thick and shutter frame size 39.40x17.70x1.5mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed by Engr-in-Charge.

S&F for framed work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A complete all as specified and as directed.

M&L for applying two coats of elastomeric coating material after clearing the surfaces thoroughly and sealing all cracks with acrylic sealing compound WPT on external walls, chajjas on newly plastered surfaces as per the manufacturers specifications and directions of Engr-in-charge complete all as specified and as directed.

M& L for 5mm thick rendering on fair faces of concrete surfaces of ceiling in CM 1:3 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of concrete surfaces in CM 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick (10mm, in CM 1:6 + 5 mm in(CM 1:4) ) thick on fair faces of brick work or concrete surfaces in two layers on external surface even & fair with integral water proofing compound complete all as specified and as directed.

Complete removal of existing treatment of wall surfaces complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over 2mm thick wall care putty over a coat of chalk whitening primer on newly plastered surfaces of wall including preparation complete all as specified and as directed.

M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces, height upto 15 mtrs complete all as specified and as directed by Engr-in-charge.

M&L for Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Ditto all as per Srl item No above but except brick complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan area and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in subbase etc complete all as specified and as directed.

M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor complete all as specified and as directed.

M&L for plain cement concrete type B2,1:2:4 (using 40 mm graded stone aggregates) as in post holes complete all as speicfied and as directed.

M&L for 20-25mm thick pre mirror polished machine cut kota stone slab flooring over and including 15 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floor complete all as specified and as directed by Engr-in-Charge

M&L for 20-25mm thick pre mirror polished machine cut kota stone slab flooring on 10 mm thick cement plaster in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in skirting complete all as specified and as directed by Engr-in-Charge

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in cementmortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and fix in repairs E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, the frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers, hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc., the last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer instructions, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness including fillets complete all as specified and as directed.

M&L for 50 mm thick Cement concrete 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection,flooring etc,complete all as specified and as directed by Engr-in-Charge.

M&L for 6 mm thick transparent,blue edges toughned glass including, 2 mm thick powder coated aluminium frame and fix in brick wall complete all as specified and as directed by Engr-in-Charge

M&L for Mild steel works as in posts and struts,purlin,rafter,truss,Circular pipe, square section, angle iron, flat iron, Nut bolt, etc, cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165 complete all as speicfied and as directed by Engr-in-charge

M&L for rolled mild steel works as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,Fe-290 (Gde E16) complete all as speicfied and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter,fixed with self tapping screwscomplete all as specified and as directed.

S&F for 2Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (Note: each line wire to be measured)

Dismantling of Asbestos cement/corrugated steel sheet 0.50mm thick (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-in-Charge

M&L for type B0-1:2:4(12.5 graded stone aggregates) Reinforced cement concrete (nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-charge.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT steel of grade Fe 500/Fe 500 D/Fe 550/ Fe 550 D meeting all requirements of IS 1786 complete all as specified and as directed by Engr-in-Charge.

Ditto all as per Srl item No above but 6mm to 8mm dia,as in stirrups, spacers and binders complete all specified and as as directed by Engineer-incharge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth/roof beams; and similar work; vertical or to batter for flat and Rough finished sur faces of concrete complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs PLEATED pleased blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.

M & L for complete removal of existing treament and applying two coats of oil bound distemper over 3mm thick wall care putty to get smooth and even surfaces on old plastered surfaces and applying as directed and complete all as specified and as directed by Engineer-in-charge.

M & L for dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over 20 mm thick Cement mortar (1:4) screed bed, complete all as specified and as directed.

M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished,exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over 10 mm thick Cement mortar (1:4), complete all as specified and as directed.

Supply and fix in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet and single side prelam PVC sheet used, inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including dismantling complete all as specified and as directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Supply and laying of GI steel tubing 40 mm bore medium grade laid in tranches/wall/floor and joined including necessary fittings such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and as directed.

Supply and laying of GI steel tubing 20 mm bore medium grade laid in tranches/wall/floor and joined including necessary fittings such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and as directed.

M&L for Gun metal globe/gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 40 mm bore dia steel tubing complete all as specified and as directed.

M & L for Gun metal globe/gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 20 mm bore dia steel tubing complete all as specified and as directed.

S & F for Bib taps, 20 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F 20 for mm bore Float/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for GI pipe and fixed complete all as specified and as directed.

Supply, Hoisting and fixing in postion and connecting, 2000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangements for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed.

Supply, Hoisting and fixing in postion and connecting, 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangements for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed.

Material & labour brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50 cm x 50 cm x 6 mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrtangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and as directed.

Material and labour for cutting, drilling and taping cast iron / Ductile iron water mains (in position) for branch connection of the internal dia 100 to 150 mm including necessary fittings such as ferrules, nipple short pipe etc complete all as specified and as directed.

Supply and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 of 15 mm dia fittings with all fittings and fixed to wall or through wall / ceiling or laind in floors incl cutting, chasing, clamps and all fittings and fixtures complete all as specified and as directed.

Supply and fix completely assembled / pre piped / pre wired auto start / stop based on water level in the tank MCB for plant protection raw water pump integrated with plant robust high pressure pump in SS 304 construction membranes from GE / Hydranautics Gk\lycerin Filled SS Pressure Gauge for durability online rota - meter for measuring premeate flow PU coated MS Skid & plated hardware automatic backwashing of filters available as premium range. Microprocessor based control panel for ease of operation and inbuilt process logic. Integrated pretreatment module for removal of suspended solids along with pressure gauges. Inbuilt protection to high pressure pump by way of low pressure switch / high pressure switch. Blending Cartridge provision to adjust taste / TDS and followed by ultra violet disinfection for total safety (Reverse Osmosis Plant) of out put capacity of 250 Litres per hour complete all as specified and as directed by Engr-in-Charge of following specifications:- (a) Maximum flow - 250 LPH (b) Average flow - 250 LPH (c) Lnlet TDS - 500 to 2000 mg/L (Max) (d) Permeate TDS - <150 mg/L (e) Recovery - 20% (f) Pressure Sand Filter (PSF) Capacity - 1000 LPH (g) Activated Carbon Filter (ACF) Capacity - 1000 LPH (h) Antiscalant Dosing System - Yes (j) Antiscalant Dosing tank Capacity - 50 Ltrs (k) Micron Cartridge Filter (PP) - 5 Micron, 20" Long (l) High Pressure Pump (HPP) - 1000 LPH, 1.1 KW (m) RO Membrane - 4"*40" (n) UV - Yes (o) Plant Dimensions in mm - (L*W*H) - 1000*800*1700 (p) Weight Approx - 250 Kg (q) Power Supply - 415 V, AC, 3 Phase, 4 Wire, 50 Hz

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and as directed by Engineer in charge.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed..

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and as directed by Engineer in charge.

Material & Labour Sub main wiring with four single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing into PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified and as directed. Note : - two run of 4.0 Sqmm & one run of 4.0 Sqmm cable shall be measured as one unit run.

M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge. Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point controlled by one switch.

( b) One fan point/ex fan controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 70 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15Amp independent board complete all as specified and as directed.

M&L for fan regulator socket type AC 230 volts complete all as specified and as directed by Engineer in charge.

M&L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed by Engineer in charge.

M&L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and as directed by Engineer in charge

M&L for Switch socket combination 3 pin 5 and 15 Amps AC 230 volts flush type complete all as specified and as directed by Engineer in charge

M&L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and as directed by Engineer in charge

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and as directed.

S&F for LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F for Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and as directed by Engineer in charge.

S&F for MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and as directed by Engineer in charge.

S&F for MCB single pole 240 volts 6 to 40 Amps, B Series complete all as specified and as directed by Engineer in charge.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. complete all as specified and as directed.

S&F for Sheet metal enclosure MCB distribution board including 200 Amps bus-bar triple pole and neutral vertical 415 V, 4 Ways, double door type,complete all as specified and directed. With Incoming MCCB of 100 Amps Capacity complete all as specified and as directed.

S & F MCB TP 25 to 63 Amps, 240 Volts, minimum 10 KA, "C" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed (Note :- Proper and suitable size cable copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and as directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 Sqmm complete all as specified and as directed by Engineer in charge

Supply,laying & fixing double wall corrugated (DWC) pipes of size 50 mm outer dia and 38 mm inner dia made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc with all as required complete all as specified and as directed by Engr in Charge.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan area and getting out in any type of soil complete all as specified and as directed.

M&L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

S&F LED light fitting square 57x57 CM Not less than 36 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and as directed by Engineer in charge.

chandra builders (BID ID -3316736)

ANAMIKA CONSTRUCTION (BID ID -3326506)