Repair and maintenance work of Poly House under UNIDO Project and Cotton Net House in garden at NBRI, Lucknow.

Amount

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type squire tube

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Supply & fixing of 600mm Exhaust fan, slow speed with 900 RPM, Crompton Greaves/Champion/Bajaj or eqvt. Make including wiring (15.00 mtr approx.) in PVC conduit, 1.5mm two core copper wire with MCB including testing, commissioning etc complete.

Supply & Fixing of 100mm thick, 5x4 ft chemical coated cellulose cooling pads.

Replacement of damaged/burnt out compressor with new including all necessary fitting, labour T&P etc complete.

Supply and fixing 6 mm thick multiwall polycarbonate sheet of approved make and shade for the partition of poly house including all materials, labour, T&P etc.

Repair of 1 HP Mono block pump including rewinding, replacement of bearing, oil seal and other necessary parts etc complete.

Creation of separate section of misting for two different chambers by putting additional control valve, high pressure nylon pipe with brass fitting etc complete.

Providing & fixing hydraulic door closer Godrej or eqvt. make complete with necessary accessories and screw etc. comp.

Complete servicing of existing water softener plant in all respects including cleaning of existing water storage tank with 30% HCL acid (commercial grade), overhauling of the softener multiport valve to ensure its smooth operation, charging of Ion exchange resin by NaCl (commercial grade) Qty- 20 Kg, testing of hardness of purified water by hardness kit to ensure the hardness of purified water less or equal than 50 ppm and all necessary labour, T&P etc complete.

Supply and Fixing of Cross Fogger with Discharge 7 lph at 3.5 bar and leakage Prevention device complete

Supply and Fixing of Micro Sprinklers with fittings complete.

Supply and Fixing of 16mm LLDPE Pipe with fittings etc. complete.

Supply and fixing 40mm Section Valve with fittings complete.

Supply and fixing 40mm PVC pipe with fittings

Laying of 40mm PVC pipe with fittings complete

Servicing & Fixing of Cross Foggers complete.

Supply and Fixing of 1.5 Sq.mm / 2 core wire complete.

Supply & Fixing of 1” conduit for wiring with necessary fittings complete.

Supply/Fixing of 16mm Lateral Valves with fitting complete.

Servicing of 2 hp Booster Pump including oiling greasing complete.

Note:- Rates should be quoted inclusive of all Taxes, GST @ 18% etc.

Pranav Kumar

M/S GRAFH ENGINEERS

Nature Bell