REPAIR AND MAINTENANCE OF US LT CABLES LT PANELS LT SWITCH GEAR PROTECTION SYSTEM OH LINES AND OTHER CONNECTED WORK AT MANKOT AND VIJAY VIHAR AREA AT DALHOUSIE CANTT

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m for laying cables, stays etc and getting out in hard dense soil all as specified.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified

Material and labour for dry sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed.Note- Punned down thickness will be measured for payment purpose.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

M&L and jointing testing and commisioning in replacement XLPE LT UG Cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc Make of LT UG Cable- Havells / KEI/ Polycab/Grandlay and including taking down old unserviceable cables complete all as specified and directed of following sizes :-

Cross sectional area 3.5 core 95 Sqmm

Cross sectional area 3.5 core 25 Sqmm

Cross sectional area 4 core 16 Sqmm

Supply & lay GI tubing light grade 40 mm dia bore in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed. Make :- Prakash surya/Jindal/Tata

Cutting of road / hardstanding upto a size not exceeding 20 cms in width and not exceeding 60 cms in depth for laying of LT UG cable protection pipe line making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type B1 complete all as specified and directed.

S & F IP65 Rated Decorative gate light made up of high grade unbreakable polycarbonate material Mounting Pole Dia - 60 mm (max) OD and Dimension: Width: 189 mm & Height: 216 mm. suitable for 20 W LED lamp B22 base. including provision of 1.5 mtr long 50mm dia GI Pipe light grade with 20cmx20cmx30cm (LxBxH) PCC work and complete with 1x20W LED Lamp with fixing arrangement of light of make :- Havells Cat part No-LHFOGAE1T11F015 'LEXO (PRISMATIC)' or equivailent make in Crompton/Wipro/Bajaj/Philips complete all as specified and as directed.

Supply Fixing in replacement for circuit for gate light / bollard light fitting complete with 1.0 sqmm 3 core PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable 1100 V grade drawn through supply and fixing and grounding PVC conduit 15 mm dia (light fitting to light fitting) complete all as specified and directed.

Supply & fixing inreplacement of Busbar Chamber 6 way wall mounted of current carrying capacity 200A, 415 Volts having three phase and neutral Busbar made of ETP Grade Copper, bus bar mounted on apoxy insulator complete with mounting arrangement such as pole claps / hold fastner etc.complete all as specified & directed. Make :- Havells/Indoasian/Standard (Cat Part :-IHBC020006)

Outdoor type factory made bus bar chamber of size 0.75x0.45x0.40 metres depth made out of CRCA sheet 3.15mm thick with 4 No's aluminium bus bars of capacity 200 Amps,with colour code supported on insulators, internally prewired having locking arrangement, handle, provision of suitable hole at bottom for incoming and outgoing under ground cables, panel having angle iron frame made of 40 X 40 X 6 mm angle iron and 50 cms long legs made of 40 X 40 X 6 mm angle embedded upto 20 cms in PCC & 30 cms clear above ground complete including painting with two coats of powder coated paint over a coat of red oxide primer on exterior and interior faces, errection of Bus Bar chamber duly grouted in PCC M-15, type B0 using 12.5 mm graded crushed stone aggregate including earth work complete all as specified and directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 25X4 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, and cover 6 mm thick in cement concrete (1:2:4) type B1, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 1.0 OHMS. Note- In case earth resistance more than 1.0 ohms, the contractor wiil re earthing at no extra cost.

Deduction Credit Amount as per Sch of Credit as details given on Srl Page No. Of 25 In tender documents.

M/s Shakti Electric Works

M/S SHRI RAM BUILDERS

M/S MALHI CONSTRUCTIONS

M/s. Rishav Sood