Hinjawadi Modification and upgradation of Pumpset

Amount

Modification and upgradation of Pumpset at Ph-III Pumping Station,Hinjewadi.

Dismantling the old 125 HP VT pump set from WTP Hinjewadi for necessary modification to achieve the required discharge.

Modification and upgradation of removed 125 HP VT pump set removed from WTP Hinjewadi including providing the required new spares such as Gun metal impeller, pump shaft, coloumn pipe, discharge header, strainers, shaft sleeve, coupler, spider etc complete.

Modification and upgradation of the 125 HP VHS motor removed from WTP Hinjewadi including providing the required new bearing housing, replacement of new bearings of DE & NDE side, rewinding of the motor, dynamic balancing of rotor coupling unit etc complete.

Supply & erecting suitable soft Number starter panel with all accessories for above pumps.

LT Cables (Aluminum) (CB-LT/AL)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire round armoured cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Plate, Pipe type Earthing (EA-EP)

Supply, installing, and testing of each maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results.

Accessories

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required.

Sheets

Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Erection,testing and commissioning of the modified pumpset and motor at PH-III pumping station with all required base plate and consumables

Supplying & erecting 250 mm sluice valve with all accessories, nut bolts etc.

Supplying & erecting 250 mm non return valve with all accessories,nut bolts etc.

Supplying & erecting dismantling joint of 250 mm dia with all accessories,nut bolts etc complete

Supplying & fixing MS fabricated pipes 250 mm dia,8 mm thick for connection upto rising main header

Transportation,handling & crane charges of the pump set from WTP to factory and factory to Ph -III pumping station.

Shree Siddhivinayak Industries (BID ID -6576490)

Tirupati Electricals Sales & Services (BID ID -6573888)