Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹87.2 LAdmitted-Finance | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SEEMA CONSTRUCTION L1 |
|---|---|---|---|---|
| 1.00 | Site clearance by uprooting of trunk vegetation, bush, wood, trees and sapplings of girth upto 15cms and disposal of rubbish with in 50mtr. Including leveling and dressing of ground as per direction of Engineer incharge. | 400 | Sqm | 10 ₹4,000 Lowest |
| 2.00 | Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually (on lime surkhi/sand plaster base) on decorative/ornamental lime plaster in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.) | 40 | Sqm | 700 ₹28,000 Lowest |
| 3.00 | Providing and fixing fine dressed sand stone / approved stone "Chajja" for palaces, chattries, forts and jharokas with fine dressed surface both sides and front edges should be round shape/moulding, fixing in grinded lime surkhi mortar 1:2 joint flush with proper adhesive with pigment to match the shade of stone (thickness of chajja on front edge 50mm and 75mm on fixing end) exposed surface is to be measured only | 12 | Sqm | 3,550 ₹42,600 Lowest |
| 4.00Providing and fixing "Stone Kalasha" as per existing matching on doms od chattries/jharokhas as per existing design & dimensions as per traditional practices, fixing of kalash carefully without damaging the doms complete in all respect.Sand stone/approved stone Kalasha | ||||
| 4.10 | Kalasha height.(exposed part) 90cm. to 100cm. | 2 | Each | 3,500 ₹7,000 Lowest |
| 5.00 | Steel-rod stitching incracked stone patties, beam,and lintels.Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with cement and aradite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charge per hole.steel rod charges are counted per kg.Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position. | 20 | Each | 500 ₹10,000 Lowest |
| 6.00 | Making Gardana under ceiling/ chajja with katla stone and grinded Lime surkhi mortar 1:2 including moulding work and fine finishing with grinded Lime surkhi mortar 1:2 as per existing matching/ traditional practice completev in all respect;.Size Size 25cm X 25cm. | 30 | Rmt | 500 ₹15,000 Lowest |
| 7.00 | Removing/ dismambering of disturbed "Architectural Parts" of "Shikhar" (Varandika, venukosha, Bhumi, Amalaka, Laghu Shikhar, Urushringa, Skandha, Griva, Amalasaraka, Chandrika, Kalasha ) without damaging the parts by machenical/manual system carefully with proper marking and complete documentation including all scaffolding and shuttering work, stacking the useful architectural parts in proper sequence at proper place as per direction of Engineer incharge (for all lead and lift.) | 11 | Cum | 8,500 ₹93,500 Lowest |
| 8.00 | Refixing of existing "Architectural Parts" of "Shikhar" (Varandika, venukosha, Bhumi, Amalaka, Laghu Shikhar, Urushringa, Skandha, Griva, Amalasaraka, Chandrika, Kalasha ) as per temple architecture without damaging the parts by machenical/manual system carefully with proper order and sequence including all scaffolding and shuttering work as per direction of Engineer incharge (for all lead and lift.) | 6 | Cum | 30,000 ₹1,80,000 Lowest |
| 9.00 | Providing and fixing solid stone (Pillar/ Lintel and Arch) and "Architectural Parts" of "Shikhar" (Varandika, venukosha, Bhumi, Amalaka, Laghu Shikhar, Urushringa, Skandha, Griva, Amalasaraka, Chandrika, Kalasha ) having carving work as per temple architecture, fixing by machenical/manual system carefully with proper order and sequence as per ornamental design/Drawing, approved quarry with moulding work as per architecture complete with proper adhesive /clips/ Cramps, pins etc. All Inclusive of transportation, loading & fixing Stone and design shall be got approved by the authority before start of work All work shall be done as par direction and satisfaction of authority, including all scaffolding and shuttering work as per direction of Engineer incharge (for all lead and lift.) | 5 | Cum | 95,500 ₹4,77,500 Lowest |
Tender Value
₹89.9 L
EMD Value
₹1.8 L
Closing Date
8 Oct 2026, 2:00 pmClosed
Director, Archaeology and Museums, Jaipur
Department of Archaeology and Museums, Jaipur
Conservation, Restoration and Development works at Ramanand Ji ki chhatrie, Jhalawar
2026_ARCMU_601508_1
NIB 9/2026-27
Open Tender
Civil Works
Percentage
365 days
Gagron, Jhalawar
As per Bid Document
3 documents required · 3 mandatory
₹1,500
Egras
₹1.8 L
Yes
14 Oct 2026
29 Sept 2026
8 Oct 2026
29 Sept 2026
8 Oct 2026
29 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 689 | Cum | 175 | ₹1,20,575 |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | 123 | Cum | 3,847 | ₹4,73,181 |
| 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 50 | Cum | 2,838 | ₹1,41,900 |
| 4 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 75 mm thick | 50 | Sqm | 1,664 | ₹83,200 |
| 5 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.
M20 grade Nominal Mix / Design Mix | 90 | Cum | 4,934 | ₹4,44,060 |
| 6 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand | 63 | Cum | 1,024 | ₹64,512 |
| 7 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.
M20 grade Nominal Mix / Design Mix | 69 | Cum | 5,609 | ₹3,87,021 |
| 8 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix | 21 | Cum | 5,185 | ₹1,08,885 |
| 9 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Arches, arch ribs, domes, vaults, shells, folded plate, chimneys, shafts , roofs having slope more than 15º ,vertical and horizontal fins individually or forming box louvers, facias and eaves boards M20 grade Nominal Mix / Design Mix | 2 | Cum | 5,561 | ₹11,122 |
| 10 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 131 | Sqm | 157 | ₹20,567 |
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_1066193.xls
BOQ • 0.48 MB
Bid_Document_09.pdf
Tender Documents • 0.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .